Enhanced thermal conductivity of phase change materials with ultrathin-graphite foams for thermal energy storage
The DOI matches its Crossref record; 38 of the 39 references it cites were found in a registry or an index.
Abstract
Embedding continuous ultrathin-graphite foams (UGFs) with volume fractions as low as 0.8–1.2 vol% in a phase change material (PCM) can increase the effective thermal conductivity by up to 18 times, with negligible change in the melting temperature or mass specific heat of fusion.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Originally, additives with high thermal conductivity were directly introduced into a system to obtain thermally conductive composite PCMs; however, the enhancement of thermal conductivity was generally limited. Moreover, this strategy inevitably reduces the TES density due to the occupation of the inherent pores.[ 4 , 15 , 21 , 22 , 23 , 24 , 25 , 26 , 27 ]”
From Carbon-Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion (2021) · cites this paper as [23]
In the citing paper
“Additionally, the change in the thermal performance of MPCMs was negligible after 500 thermal cycling tests due to the extraordinarily stable 3D network structure.”
From Carbon-Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion (2021) · cites this paper as [23]
Citations
Cites
Superior Thermal Conductivity of Single-Layer Graphene
Balandin, A. A., Ghosh, S., Bao, W., Calizo, I., Teweldebrhan, D., Miao, F., & Lau, C. N. (2008) · Nano Letters · doi:10.1021/nl0731872 · Cited by 13,823
Thermal properties of graphene and nanostructured carbon materials
Balandin, A. A. (2011) · Nature Materials · doi:10.1038/nmat3064 · Cited by 6,244
Chen, Z., Ren, W., Gao, L., Liu, B., Pei, S., & Cheng, H.-M. (2011) · Nature Materials · doi:10.1038/nmat3001 · Cited by 3,834
Thermal Transport Measurements of Individual Multiwalled Nanotubes
Kim, P., Shi, L., Majumdar, A., & McEuen, P. L. (2001) · Physical Review Letters · doi:10.1103/physrevlett.87.215502 · Cited by 3,378
Self-citationThermophysical Properties of Matter
Touloukian, Y. S. (1995) · CERN Document Server (European Organization for Nuclear Research) · Cited by 3,282
Two-Dimensional Phonon Transport in Supported Graphene
Seol, J. H., Jo, I., Moore, A. L., Lindsay, L., Aitken, Z. H., Pettes, M. T., Li, X., Yao, Z., Huang, R., Broido, D., et al. (2010) · Science · doi:10.1126/science.1184014 · Cited by 1,926
Self-citationA review of power battery thermal energy management
Rao, Z., & Wang, S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.096 · Cited by 1,207
Heat and cold storage with PCM: An up to date introduction into basics and applications
Mehling, H., & Cabeza, L. F. (2008) · Heat and Mass Transfer · doi:10.1007/978-3-540-68557-9 · Cited by 894
On the effective thermal conductivity of a three-dimensionally structured fluid-saturated metal foam
Boomsma, K., & Poulikakos, D. (2001) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(00)00123-x · Cited by 831
Thermal Conductivity and Phonon Transport in Suspended Few-Layer Hexagonal Boron Nitride
Jo, I., Pettes, M. T., Kim, J., Watanabe, K., Taniguchi, T., Yao, Z., & Shi, L. (2013) · Nano Letters · doi:10.1021/nl304060g · Cited by 770
Self-citation
Research works printed but not linked: 1
- L. M. Jiji , Heat Conduction , Begell House , New York , 2003
Cited by
Items 201–300 of 596
Umair, M. M., Zhang, Y., Tehrim, A., Zhang, S., & Tang, B. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b06288 · Cited by 96
Zhu, X., Wang, Q., Kang, S., Li, J., & Jia, X. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125112 · Cited by 95
Xu, H. J., & Zhao, C. Y. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.10.054 · Cited by 93
Chang, C., Nie, X., Li, X., Tao, P., Fu, B., Wang, Z., Xu, J., Ye, Q., Zhang, J., Song, C., et al. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta07289c · Cited by 93
Han, W., Ge, C., Zhang, R., Ma, Z., Wang, L., & Zhang, X. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.01.153 · Cited by 92
Luo, Q., Liu, X., Wang, H., Xu, Q. P., Tian, Y., Liang, T., Liu, Q., Liu, Z., Yang, X., Xuan, Y., et al. (2021) · Applied Energy · doi:10.1016/j.apenergy.2021.117995 · Cited by 93
Hamidi, E., Ganesan, P. B., Sharma, R. K., & Yong, K. W. (2023) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113196 · Cited by 94
Zhang, L., Wei, Q., An, J., Ma, L., Zhou, K., Ye, W., Yu, Z., Gan, X., Lin, C., & Luo, J. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122551 · Cited by 94
Molecular dynamics simulations of phase change materials for thermal energy storage: a review
Tafrishi, H., Sadeghzadeh, S., & Ahmadi, R. (2022) · RSC Advances · doi:10.1039/d2ra02183h · Cited by 89
Yang, L., Yang, J., Tang, L., Feng, C., Bai, L., Bao, R., Liu, Z., Yang, M., & Yang, W. M. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b04212 · Cited by 87
Lignin-fatty acid hybrid nanocapsules for scalable thermal energy storage in phase-change materials
Sipponen, M. H., Henn, A., Penttilä, P. A., & Österberg, M. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124711 · Cited by 87
“One of the promising systems is based on phase-change materials (PCMs) that can be used in thermal energy storage applications [3,4].”
BackgroundMethodLi, H., Hu, C., He, Y., Tang, D., & Wang, K. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2020.102230 · Cited by 91
Yuan, M., Xu, C., Wang, T., Zhang, T., Pan, X., & Ye, F. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127394 · Cited by 90
Multifunctional performance of carbon nanotubes in thermal energy storage materials
Feng, D., Zhao, Z., Li, P., Li, Y., Zha, J., Hu, J., Zhang, Y., & Feng, Y. (2024) · Materials Today · doi:10.1016/j.mattod.2024.04.005 · Cited by 86
Samykano, M. (2022) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2022.102234 · Cited by 111
Multiscale architected porous materials for renewable energy conversion and storage
Hoseini, S. S., Seyedkanani, A., Najafi, G., SASMITO, A. P., & Akbarzadeh, A. (2023) · Energy storage materials · doi:10.1016/j.ensm.2023.102768 · Cited by 105
Anand, A., Mansor, M., Sharma, K., Shukla, A., Sharma, A., Siddiqui, M. I. H., Sadasivuni, K. K., Priyadarshi, N., & Twala, B. (2024) · Alexandria Engineering Journal · doi:10.1016/j.aej.2024.10.054 · Cited by 84
Bio-based thermosetting epoxy foams from epoxidized soybean oil and rosin with enhanced properties
Huang, X., Yang, X., Liu, H., Shang, S., Cai, Z., & Wu, K. (2019) · Industrial Crops and Products · doi:10.1016/j.indcrop.2019.111540 · Cited by 82
Wang, C., Wang, L., Liang, W., Liu, F., Wang, S., Sun, H., Zhu, Z., & Li, A. (2021) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2021.07.066 · Cited by 82
Wu, R., Gao, W., Zhou, Y., Wang, Z., & Lin, Q. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.109318 · Cited by 84
Shahnaz, T., Hayder, G., Shah, M. A., Ramli, M. Z., Ismail, N., Hua, C. K., Zahari, N. M., Mardi, N. H., Selamat, F. E., Kabilmiharbi, N., et al. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.12.108 · Cited by 81
Hybrid boron nitride-natural fiber composites for enhanced thermal conductivity
Xia, C., Garcia, A. C., Shi, S. Q., Qiu, Y., Warner, N. A., Wu, Y., Cai, L., Rizvi, H. R., D’Souza, N. A., & Nie, X. (2016) · Scientific Reports · doi:10.1038/srep34726 · Cited by 81
Ramakrishnan, S., Wang, X., & Sanjayan, J. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.11.025 · Cited by 79
Numerical simulation of thermal conductivity of graphene filled polymer composites
Zhang, Y., Zhao, Y., Bai, S., & Yuan, X. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.09.052 · Cited by 80
Thermally conductive polymer nanocomposites for filament-based additive manufacturing
Almuallim, B., Harun, W. S. W., Rikabi, I. J. A., & Mohammed, H. A. (2022) · Journal of Materials Science · doi:10.1007/s10853-021-06820-2 · Cited by 79
“Therefore, new enhanced materials with high thermal conductivity are required to overcome the problem related to emerging new technology [7, 8].”
BackgroundA novel form-stable phase change composite with excellent thermal and electrical conductivities
Zhang, H., Sun, Q., Yuan, Y., Zhang, Z., & Cao, X. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.12.046 · Cited by 78
Advanced materials for personal thermal and moisture management of health care workers wearing PPE
Lou, L., Chen, K., & Fan, J. (2021) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2021.100639 · Cited by 80
Zhang, W., Kong, Q., Tao, Z., Wei, J., Xie, L., Cui, X., & Chen, C. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201900147 · Cited by 76
Harish, S., Orejón, D., Takata, Y., & Kohno, M. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.10.109 · Cited by 77
Enhanced thermal properties of PDMS composites containing vertically aligned graphene tubes
Zhang, Y., Ren, Y., Guo, H., & Bai, S. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.01.029 · Cited by 76
Lin, C., & Rao, Z. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.09.065 · Cited by 76
Hu, N., Li, H., Wei, Q., Zhou, K., Zhu, W., Zhang, L., Li, S., Ye, W., Jiao, Z., Luo, J., et al. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108293 · Cited by 74
Liu, P., Gu, X., Bian, L., Cheng, X., Peng, L., & He, H. (2019) · ACS Omega · doi:10.1021/acsomega.8b03130 · Cited by 74
Li, K., Cheng, X., Li, N., Zhu, X., Wei, Y., Zhai, K., & Wang, H. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta07147g · Cited by 73
Vertically aligned graphene film/epoxy composites as heat dissipating materials
Zhang, Y., Ren, Y., & Bai, S. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.11.014 · Cited by 73
Engineering of polymer-based materials for thermal management solutions
Maqbool, M., Aftab, W., Bashir, A., Usman, A., Guo, H., & Bai, S. (2021) · Composites Communications · doi:10.1016/j.coco.2021.101048 · Cited by 72
Integrated nanomaterials for extreme thermal management: a perspective for aerospace applications
Barako, M. T., Gambin, V., & Tice, J. B. (2018) · Nanotechnology · doi:10.1088/1361-6528/aaabe1 · Cited by 72
“PCM composites have typically incorporated metal foams [86], carbon foams [81, 87], or graphite dispersions [88] to increase the composite thermal conductivity.”
BackgroundRamakrishnan, S., Wang, X., & Sanjayan, J. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.03.053 · Cited by 72
High thermal conductivity phase change composite with a metal-stabilized carbon-fiber network
Nomura, T., Zhu, C., Nan, S., Tabuchi, K., Wang, S., & Akiyama, T. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.04.070 · Cited by 71
Harish, S., Orejón, D., Takata, Y., & Kohno, M. (2014) · Thermochimica Acta · doi:10.1016/j.tca.2014.12.004 · Cited by 71
High thermal conductive epoxy based composites fabricated by multi-material direct ink writing
Liu, J., Guo, Y., Weng, C., Zhang, H., & Zhang, Z. (2019) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.105684 · Cited by 72
Warzoha, R. J., & Fleischer, A. S. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.04.121 · Cited by 71
Qian, T., Zhu, S., Wang, H., & Fan, B. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b04349 · Cited by 70
Wang, T., Jiang, Y., Huang, J., & Wang, S. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.02.108 · Cited by 69
Li, H., Hu, C., He, Y., Tang, D., Wang, K., & Hu, X. (2021) · Energy · doi:10.1016/j.energy.2021.121540 · Cited by 70
Huang, X., Yao, S., Yang, X., & Zhou, R. (2022) · Renewable Energy · doi:10.1016/j.renene.2022.02.035 · Cited by 69
Odoi-Yorke, F., Opoku, R., Davis, F., & Obeng, G. Y. (2023) · Energy Reports · doi:10.1016/j.egyr.2023.09.044 · Cited by 73
Ali, S. A., Habib, K., Younas, M., Saidur, R., Das, L., Rubbi, F., Mulk, W. U., & Rezakazemi, M. (2024) · Energy & Fuels · doi:10.1021/acs.energyfuels.4c03634 · Cited by 75
Functional phase change composites with highly efficient electrical to thermal energy conversion
Sun, Q., Zhang, N., Zhang, H., Yu, X., Ding, Y., & Yuan, Y. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.08.007 · Cited by 68
Zhang, H., Cheng, J., Wang, Q., Xiong, D., Song, J., Tang, Z., & Liu, X. (2021) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2021.111135 · Cited by 68
Warzoha, R. J., & Fleischer, A. S. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502819q · Cited by 72
Nanoencapsulated crystallohydrate mixtures for advanced thermal energy storage
Graham, M., Clemente, J. A. C., Shchukina, E. M., & Shchukin, D. G. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02494k · Cited by 70
Barthwal, M., Dhar, A., & Powar, S. (2021) · ACS Applied Energy Materials · doi:10.1021/acsaem.1c01268 · Cited by 71
Personal cooling garments and phase change materials: A review
Rahimi, E., Babapoor, A., Moradi, G., Kalantary, S., & Esmaeelpour, M. M. (2023) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.114063 · Cited by 73
Song, S., Zhao, T., Zhu, W., Qiu, F., Wang, Y., & Dong, L. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b04523 · Cited by 66
Recent progress on Carbon-based nanomaterial for phase change materials: Prospects and challenges
Olabi, A. G., Wilberforce, T., Elsaid, K., Sayed, E. T., Ramadan, M., Rahman, S. M. A., & Abdelkareem, M. A. (2021) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2021.100920 · Cited by 69
“Toolbox” for the Processing of Functional Polymer Composites
Wei, Y., Zhou, H., Deng, H., Ji, W., Tian, K., Ma, Z., Zhang, K., & Fu, Q. (2021) · Nano-Micro Letters · doi:10.1007/s40820-021-00774-5 · Cited by 65
Ai, H., Lv, L., Chen, T., Zhang, Y., Dong, L., & Song, S. (2021) · Energy Conversion and Management · doi:10.1016/j.enconman.2021.115172 · Cited by 66
Aftab, W., Shi, J., Qin, M., Liang, Z., Xiong, F., Usman, A., Han, S., & Zou, R. (2022) · Energy storage materials · doi:10.1016/j.ensm.2022.08.002 · Cited by 64
Zhang, C., Ma, H., Li, K., Liu, Y., Xu, Z. Y., Pang, K., Cai, S., Fan, L., & Gao, C. (2025) · Energy storage materials · doi:10.1016/j.ensm.2025.104003 · Cited by 95
Zhang, J., Mu, J., Chen, S., & Xu, F. (2022) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2022.08.003 · Cited by 64
Zheng, X., Xie, N., Chen, C., Gao, X., Huang, Z., & Zhang, Z. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.03.048 · Cited by 66
Zhao, Y., Sun, B., Du, P., Min, X., Huang, Z., Liu, Y., Wu, X., & Fang, M. (2019) · Materials Research Express · doi:10.1088/2053-1591/ab4700 · Cited by 64
Thermally conductive and form-stable phase change composite for building thermal management
Wu, M., Li, T., He, Q., Du, R., & Wang, R. Z. (2021) · Energy · doi:10.1016/j.energy.2021.121938 · Cited by 68
Qureshi, Z. A., Al-Omari, S. A. B., Elnajjar, E., Al‐Ketan, O., & Al‐Rub, R. K. A. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.119420 · Cited by 66
Optimizing the design of composite phase change materials for high thermal power density
Barako, M. T., Lingamneni, S., Katz, J. S., Liu, T., Goodson, K. E., & Tice, J. B. (2018) · Journal of Applied Physics · doi:10.1063/1.5031914 · Cited by 62
Chen, G., Shi, T., Zhang, X., Cheng, F., Wu, X., Leng, G., Liu, Y., Fang, M., Min, X., & Huang, Z. (2019) · Polymer · doi:10.1016/j.polymer.2019.122012 · Cited by 64
Liu, C., Qian, R., Liu, Z., Liu, G., & Zhang, Y. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108646 · Cited by 68
Cao, Y., Fan, D., Lin, S., Mu, L., Ng, F. T. T., & Pan, Q. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124318 · Cited by 63
Kong, Q., Jia, H., Xie, L., Tao, Z., Yang, X. P., Liu, D., Sun, G., Guo, Q., Lü, C., & Chen, C. (2021) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2021.106391 · Cited by 61
Novel thermal switch based on magnetic nanofluids with remote activation
Puga, J. B., Bordalo, B. D., Silva, D. J., Dias, M. M., Belo, J. H., Araújo, J. P., Oliveira, J. C. R. E., Pereira, A. M., & Ventura, J. O. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.11.031 · Cited by 60
Cooling power and characteristic times of composite heatsinks and insulants
Shamberger, P. J., & Fisher, T. S. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.10.085 · Cited by 60
Han, L., Jia, X., Li, Z.-M., Yang, Z., Wang, G., & Ning, G. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b02159 · Cited by 59
Zhang, L., Liu, X., Deb, A., & Feng, G. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b05413 · Cited by 61
Accelerating the solar-thermal energy storage via inner-light supplying with optical waveguide
Zhang, Y., Tang, J., Chen, J., Zhang, Y., Chen, X., Ding, M., Zhou, W., Xu, X., Liu, H., & Xue, G. (2023) · Nature Communications · doi:10.1038/s41467-023-39190-1 · Cited by 72
Jiang, Z., Ouyang, T., Ding, L., Li, W., Li, W., & Balogun, M. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.135496 · Cited by 59
Shi, D., Zhang, L., Zhang, N., Zhang, Y., Yu, Z. G., & Gong, H. (2018) · Nanoscale · doi:10.1039/c8nr01186a · Cited by 56
Yin, H., Gao, S., Liao, C., Li, C., Cai, Z., Xu, Y., & Liu, J. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.06.355 · Cited by 56
Asgari, M., Javidan, M., Nozari, M., Asgari, A., & Ganji, D. D. (2021) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2020.100835 · Cited by 56
Beyond homogeneous dispersion: oriented conductive fillers for high κ nanocomposites
Yu, S., Shen, X., & Kim, J. (2021) · Materials Horizons · doi:10.1039/d1mh00907a · Cited by 56
Fabrication of Organic Shape-stabilized Phase Change Material and Its Energy Storage Applications
Hu, X., Wu, H., Liu, S., Gong, S. Q., Du, Y., Li, X., Lu, X. H., & Qu, J. (2021) · Engineered Science · doi:10.30919/es8d474 · Cited by 67
Li, R., Zhao, Y., Xia, B., Dong, Z., Xue, S., Huo, X., Wu, X., Liu, Y., Huang, Z., Fang, M., et al. (2021) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2021.124226 · Cited by 58
Liu, P., Li, X., Chang, X., Min, P., Shu, C., Li, Y., Kang, Y., & Yu, Z. (2021) · Carbon · doi:10.1016/j.carbon.2021.03.014 · Cited by 54
Mohtasim, M. S., & Das, B. K. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2024.114952 · Cited by 54
Li, X., Zhang, J., Fu, B., Song, C., Shang, W., Tao, P., & Deng, T. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.113241 · Cited by 53
Li, W., Huang, Y. H., Liu, Y., Tekell, M. C., & Fan, D. (2019) · Nano Today · doi:10.1016/j.nantod.2019.100799 · Cited by 54
Dong, H., Li, M., Jin, Y., Wu, Y., Huang, C., & Yang, J. (2020) · Frontiers in Energy Research · doi:10.3389/fenrg.2020.00148 · Cited by 52
Liu, Z.-P., & Yang, R. C. (2017) · Applied Sciences · doi:10.3390/app7060574 · Cited by 53
Development of cost-effective PCM-carbon foam composites for thermal energy storage
Liu, X., Yang, F., Li, M., Sun, C., & Wu, Y. (2022) · Energy Reports · doi:10.1016/j.egyr.2021.12.065 · Cited by 52
Efficacy of angled metallic fins for enhancing phase change material melting
Qin, Z., Low, Z. H., Ji, C., & Duan, F. (2022) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2022.105921 · Cited by 51
Form-stable phase change material embedded with chitosan-derived carbon aerogel
Fang, X., Hao, P., Song, B., Tuan, C., Wong, C., & Yu, Z. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.02.075 · Cited by 50
Graphene aerogel stabilized phase change material for thermal energy storage
Zhao, Y., Zhang, K., Min, X., Xiao, J., Xu, Z., Huang, Z., Liu, Y., Wu, X., & Fang, M. (2022) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2022.102497 · Cited by 51
Kang, S., Cha, J. H., Seo, K., Kim, S., Cha, Y., Lee, H., Park, J., & Choi, W. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.10.127 · Cited by 49
Chen, Y., Gao, S., Liu, C., Situ, Y., Liu, J., & Huang, H. M. (2019) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2019.109988 · Cited by 49
Super-elastic smart phase change material (SPCM) for thermal energy storage
Zhang, H., Liu, Z., Mai, J., Wang, N., Zhong, J. P., Mai, X., & Zhang, N. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.128482 · Cited by 51
Polymer based phase change material for photo-thermal utilization
Liu, J., Zou, X., Cai, Z., Peng, Z., & Xu, Y. (2020) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2020.110852 · Cited by 48
Islam, A., Pandey, A. K., Saidur, R., & Tyagi, V. V. (2024) · Materials Today Sustainability · doi:10.1016/j.mtsust.2024.100678 · Cited by 48
Effect of an increased thermal contact resistance in a salt PCM-graphite foam composite TES system
Giménez, P., Jové, A., Prieto, C., & Fereres, S. (2017) · Renewable Energy · doi:10.1016/j.renene.2017.01.032 · Cited by 47
Zhang, X., Qiao, J., Zhang, W., Cheng, F., Yin, Z., Huang, Z., & Min, X. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2531-x · Cited by 47
Sheikholeslami, M., Mousavi, S. M., Ahadi, A., & Mohammed, H. A. (2024) · Renewable Energy · doi:10.1016/j.renene.2024.122213 · Cited by 46
Metadata
- Authors
- Ji, H., Sellan, D. P., Pettes, M. T., Kong, X., Ji, J., Shi, L., & Ruoff, R. S.
- Affiliations
- The University of Texas at Austin (US)
- Corresponding author
- Shi, Li
- Ruoff, Rodney S.
- Venue
- Energy Environ. Sci.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014
- Volume
- 7
- Issue
- 3
- Pages
- 1185-1192
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2110264357
- Cited by
- 592
- References
- 39
- Citations by year
- 2026: 18 · 2025: 40 · 2024: 43 · 2023: 33 · 2022: 59 · 2021: 70 · 2020: 72 · 2019: 72 · 2018: 63 · 2017: 48 · 2016: 37 · 2015: 27 · 2014: 10
- FWCI
- 32.68
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Energy & Environmental Science (publishedVersion)
- Scholarworks@UNIST (Ulsan National Institute of Science and Technology) (submittedVersion)
- Funders
- U.S. Department of Energy
- Advanced Research Projects Agency
- Natural Sciences and Engineering Research Council of Canada
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
- Physical Sciences › Engineering › Mechanical Engineering › Adsorption and Cooling Systems
- Keywords
- phase change materials, thermal conductivity enhancement, thermal energy storage, melting point, latent heat storage
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.