Enhanced thermal conductivity of phase change materials with ultrathin-graphite foams for thermal energy storage
The DOI matches its Crossref record; 38 of the 39 references it cites were found in a registry or an index.
Abstract
Embedding continuous ultrathin-graphite foams (UGFs) with volume fractions as low as 0.8–1.2 vol% in a phase change material (PCM) can increase the effective thermal conductivity by up to 18 times, with negligible change in the melting temperature or mass specific heat of fusion.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Originally, additives with high thermal conductivity were directly introduced into a system to obtain thermally conductive composite PCMs; however, the enhancement of thermal conductivity was generally limited. Moreover, this strategy inevitably reduces the TES density due to the occupation of the inherent pores.[ 4 , 15 , 21 , 22 , 23 , 24 , 25 , 26 , 27 ]”
From Carbon-Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion (2021) · cites this paper as [23]
In the citing paper
“Additionally, the change in the thermal performance of MPCMs was negligible after 500 thermal cycling tests due to the extraordinarily stable 3D network structure.”
From Carbon-Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion (2021) · cites this paper as [23]
Citations
Cites
Superior Thermal Conductivity of Single-Layer Graphene
Balandin, A. A., Ghosh, S., Bao, W., Calizo, I., Teweldebrhan, D., Miao, F., & Lau, C. N. (2008) · Nano Letters · doi:10.1021/nl0731872 · Cited by 13,823
Thermal properties of graphene and nanostructured carbon materials
Balandin, A. A. (2011) · Nature Materials · doi:10.1038/nmat3064 · Cited by 6,244
Chen, Z., Ren, W., Gao, L., Liu, B., Pei, S., & Cheng, H.-M. (2011) · Nature Materials · doi:10.1038/nmat3001 · Cited by 3,834
Thermal Transport Measurements of Individual Multiwalled Nanotubes
Kim, P., Shi, L., Majumdar, A., & McEuen, P. L. (2001) · Physical Review Letters · doi:10.1103/physrevlett.87.215502 · Cited by 3,378
Self-citationThermophysical Properties of Matter
Touloukian, Y. S. (1995) · CERN Document Server (European Organization for Nuclear Research) · Cited by 3,282
Two-Dimensional Phonon Transport in Supported Graphene
Seol, J. H., Jo, I., Moore, A. L., Lindsay, L., Aitken, Z. H., Pettes, M. T., Li, X., Yao, Z., Huang, R., Broido, D., et al. (2010) · Science · doi:10.1126/science.1184014 · Cited by 1,926
Self-citationA review of power battery thermal energy management
Rao, Z., & Wang, S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.096 · Cited by 1,207
Heat and cold storage with PCM: An up to date introduction into basics and applications
Mehling, H., & Cabeza, L. F. (2008) · Heat and Mass Transfer · doi:10.1007/978-3-540-68557-9 · Cited by 894
On the effective thermal conductivity of a three-dimensionally structured fluid-saturated metal foam
Boomsma, K., & Poulikakos, D. (2001) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(00)00123-x · Cited by 831
Thermal Conductivity and Phonon Transport in Suspended Few-Layer Hexagonal Boron Nitride
Jo, I., Pettes, M. T., Kim, J., Watanabe, K., Taniguchi, T., Yao, Z., & Shi, L. (2013) · Nano Letters · doi:10.1021/nl304060g · Cited by 770
Self-citation
Research works printed but not linked: 1
- L. M. Jiji , Heat Conduction , Begell House , New York , 2003
Cited by
Items 501–596 of 596
Zhang, K., Liu, K., Hui, W., Zhou, J., Liu, Y., Zhang, W., Li, C., Wang, C., & Yang, H. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.115146 · Cited by 8
Composite phase change materials by confining polymers inside nanocarbon assemblies: A review
Zhang, X., Zhang, Y., Wang, X., Zhao, J., Zou, J., Sui, X., Li, Q., & Ding, B. (2025) · Next Energy · doi:10.1016/j.nxener.2025.100281 · Cited by 9
Graphene Aerogel-Directed Fabrication of Phase Change Composites
Li, G., Zhang, X., & Zhang, X. (2018) · InTech eBooks · doi:10.5772/intechopen.74616 · Cited by 9
Sattar, R., Ishaq, T., Afzal, A., Mukhtar, R., & Naz, A. (2022) · Energy Sources Part A Recovery Utilization and Environmental Effects · doi:10.1080/15567036.2022.2058117 · Cited by 9
“Conversely, the discrepancy prevailing between polymeric matrix and PCM triggers the phonon scattering persuading the interfacial heat resistance which accounts for lowering of thermal current (Ji et al. 2014; Wu et al. 2020).”
BackgroundMethodOrtiz, R. A., Valdez, A. E. G., Soria-Argüello, G., Padilla, G. M., & Berlanga, O. A. (2018) · Journal of Polymer Research · doi:10.1007/s10965-018-1552-0 · Cited by 8
“tronics [22], thermal energy storage [23], light emmitting diodes [24] and in the automotive and aerospace industries [25].”
BackgroundNumerical Investigation of a Phase Change Material Including Natural Convection Effects
Andreozzi, A., Iasiello, M., & Tucci, C. (2021) · Energies · doi:10.3390/en14020348 · Cited by 8
Latent heat of molten salt transport across graphite induced anisotropic interface
Ge, Z., Wang, L., Huang, Y., Ding, Y., & Chen, H. (2021) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2021.111496 · Cited by 8
Experimental Evaluation of Phase Change Material Blister Panels for Building Application
Velasco-Carrasco, M., Chen, Z., Aguilar-Santana, J. L., & Riffat, S. (2020) · Future Cities and Environment · doi:10.5334/fce.84 · Cited by 9
A flux growth technique for high quality cubic boron arsenide bulk single crystals
Koirala, P., Liu, W., Wu, H., Kondusamy, A. L. N., Dhale, N., Glaser, E. R., White, S., Culbertson, J. C., Freitas, J. A., & Lv, B. (2023) · Applied Physics Letters · doi:10.1063/5.0182307 · Cited by 7
Zarei, M., Vahidhosseini, S. M., Rashidi, S., Rafee, R., & Yan, W. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.115804 · Cited by 19
Ruiz, J., Ganatra, Y., Bruce, A. N., Howarter, J. A., & Marconnet, A. M. (2017) · I-THERM :/I-THERM - Intersociety Conference on Thermal Phenomena in Electronic Systems · doi:10.1109/itherm.2017.7992499 · Cited by 9
“Inclusion of carbon fibers [17], expanded graphite [11,21,22], graphene nanoplatelets [18,23], carbon nanotubes [18], carbon”
BackgroundDevelopment of a heat storage heater for hybrid electrothermal conversion and latent heat storage
Kawaguchi, T., Sato, Y., Mba, J. C., Shimizu, Y., Dong, K., Jeem, M., & Nomura, T. (2025) · Journal of Materials Chemistry A · doi:10.1039/d5ta01665g · Cited by 6
OBTAINING AND PROPERTIES OF NANOSCALE SOLID-STATE HEAT STORAGE WITH CARNAUBA WAX
Brichka, S. Y. (2021) · Energy Technologies & Resource Saving · doi:10.33070/etars.4.2021.04 · Cited by 6
Liu, F., Hu, J., Tang, R., Yuan, X., Yang, Y. T., & Cheng, H. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.141828 · Cited by 6
Wang, L., Yin, Y., Jiang, M., & Lin, P. (2025) · Energy & Fuels · doi:10.1021/acs.energyfuels.5c02109 · Cited by 6
Applications of X-Ray Computed Tomography Technology to Solid–Liquid Phase Change Materials—A Review
Martinez-Garcia, J., Guarda, D., Gwerder, D., Fenk, B., Ravotti, R., Mancin, S., Stamatiou, A., Worlitschek, J., Fischer, L., & Schuetz, P. (2025) · Energies · doi:10.3390/en18174704 · Cited by 6
“X-ray computed tomography has also been used in characterizing hybrid PCM composites, aiding to find optimal container shapes (i.e, capsules, metal/carbon skeletons) to stabilize and thermally enhance the PCM [72,81,82].”
Synthesis of n-alkane mixture microcapsule and its application in low-temperature protective fabric
Chen, X., Wang, R., Li, T., Wu, B., & Liu, X. (2017) · Journal of Wuhan University of Technology-Mater Sci Ed · doi:10.1007/s11595-017-1628-4 · Cited by 6
“In the garments field, core materials of phase change material microcapsules always select organic phase change materials which provide large latent heat and melting point close to the body temperature, such as straight-chain alkanes, fatty acids, or composite phase change materials, in order to maintain suitable phas…”
BackgroundCarrillo‐Berdugo, I., Gallardo, J. J., Ruiz-Marín, N., Guillén-Domínguez, V., Alcántara, R., Navas, J., & Poce-Fatou, J. A. (2024) · Nanomaterials · doi:10.3390/nano14141180 · Cited by 6
Zhang, H., He, S., Yao, Q., Cao, B., Wang, F., & Wang, N. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.117767 · Cited by 6
Phase Change Nanomaterials for Thermal Energy Storage
Pielichowska, K., & Pielichowski, K. (2017) · Wiley eBooks · doi:10.1002/9783527696109.ch20 · Cited by 6
Kaleni, A., Lebelo, K., Mochane, M. J., Mokhena, T. C., & Motloung, M. T. (2022) · Journal of Polymer Engineering · doi:10.1515/polyeng-2022-0020 · Cited by 8
Fouzi, M. S. A., Amin, N., Mohamad, A., Mohamad, M. S., Majid, M. S. A., Aziz, N. A., Belusko, M., & Bruno, F. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.120995 · Cited by 6
Experimental Study on the Molten Salt at Micron Scale during the Melting Process
Tian, Z., Liao, Z., Xu, C., Fang, Y., Jiang, K., & Yuan, M. (2023) · Journal of Thermal Science · doi:10.1007/s11630-023-1880-1 · Cited by 5
“In addition, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray were used to study the morphology of different materials [22, 26–35].”
Idi, M. M. E., Hajjar, A., Atli, A., Boussaba, L., Kraiem, M., Tankari, M. A., & Karkri, M. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-21574-2.00006-x · Cited by 6
Badenhorst, H. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101347 · Cited by 5
PCM-Metal Foam Composite Systems for Solar Energy Storage
Bhattacharya, A. (2019) · Energy, environment, and sustainability · doi:10.1007/978-981-15-0675-8_11 · Cited by 6
Belgacem, S. B., Trigui, A., Zghal, S., Jedidi, I., Loukil, M. S., Calmunger, M., & Abdelmouleh, M. (2025) · Composites Communications · doi:10.1016/j.coco.2025.102661 · Cited by 4
Study on Phase Change Energy Storage Materials in Building Energy Saving
Yu-chun, Z. (2017) · Chemical engineering transactions · doi:10.3303/cet1762088 · Cited by 8
Direct Photo-Thermal Energy Storage Using Nanoparticles Laden Phase Change Materials
Moudgil, D., & Khullar, V. (2019) · Energy, environment, and sustainability · doi:10.1007/978-981-15-0675-8_12 · Cited by 4
Research progress on heat conduction in graphene
Wang, Y., Liu, J., Liu, W., Zhao, J., Özdemir, E. D., & Aksel, M. H. (2025) · Critical reviews in solid state and materials sciences/CRC critical reviews in solid state and materials sciences · doi:10.1080/10408436.2025.2540959 · Cited by 3
Wu, S., Tang, Y., Zhang, X., Sang, H., Tang, K., Shen, L., Sun, X., & Li, T. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.119456 · Cited by 3
Qu, Z., Yan, S., Zhang, J., Guo, Y., Qu, S., Feng, X., Li, Q., Wu, T., Nan, G., & Zou, L. (2026) · Composites Communications · doi:10.1016/j.coco.2026.102783 · Cited by 3
Heat Accumulation by Wax Polydisperse Nanomaterials with Phase Transition
Simeiko, K. V., Sydorenko, M., & Brichka, S. Y. (2022) · Powder Metallurgy and Metal Ceramics · doi:10.1007/s11106-022-00314-9 · Cited by 3
Repurposing hazardous waste material into energy storage system
Ranjane, P. R., Thanigaivelan, U., & Kulkarni, P. S. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.113028 · Cited by 3
Mao, D., Xie, J., Sheng, G., Ye, H., Yuen, M. M. F., Fu, X., Sun, R., & Wong, C. (2017) · International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/icept.2017.8046573 · Cited by 3
“Studies have shown that wax (predominantly tricosane paraffin wax, with a melting temperature of 48°C) filled with thermally conductive fillers of various materials and shapes (such as boron nitride particle, graphite nanoplatelets, expanded graphite and so on) was found to be an effective phase-change thermal interfa…”
BackgroundOperational enhancements for small scale thermal energy storage devices
Weiss, L., Moore, A. L., Hays, A., Eboda, F., & Borquist, E. (2018) · Microsystem Technologies · doi:10.1007/s00542-018-3743-3 · Cited by 3
A method of improving the dispersion of graphene nanoplatelets in cellulose acetate based composite
Hu, Q., Gu, H., Wang, C., Ding, Y., & Ying, S. (2022) · Polymers and Polymer Composites · doi:10.1177/09673911221103419 · Cited by 3
“There exists condition where it is found that thick graphite sheets or platelets perform better in thermal stability modifying than graphene.(19) Therefore, a benign method for dispersion modification of GNPs in composites matrices is to be proposed.”
BackgroundChen, X., Yin, Y., Hou, Y., & Lin, P. (2025) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2025.113744 · Cited by 2
Lin, Z., Wu, X., Song, J., & Tang, Z. (2025) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2025.113832 · Cited by 2
Hoke, T., Hoke, J., Guo, S., Chan, B., & Chen, X. (2026) · Advanced Science · doi:10.1002/advs.75791 · Cited by 3
Tozar, A. (2026) · Energy Conversion and Management · doi:10.1016/j.enconman.2026.121697 · Cited by 2
Nanomaterials for enhancement of thermal energy storage in building applications
Xiong, T., & Shah, K. W. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-816787-8.00026-0 · Cited by 5
Li, D., Yang, J., Chang, M., Zhao, Y., Yuan, H., & Chen, Y. (2021) · Energies · doi:10.3390/en14051427 · Cited by 2
“On the other hand, most of the previous work emphasizes the importance of matrix porosity, either naturally-occurring or post-created, in the latent phase change composite; while little attention has been given to potential of surface roughness, not mentioning its contribution to final thermal properties and stability…”
BackgroundHubert, R., Matar, O. B., Foncin, J., Coquet, P., Tan, D., Li, H., Yu, J. J., Teo, E. H. T., Merlet, T., & Pernod, P. (2021) · I-THERM :/I-THERM - Intersociety Conference on Thermal Phenomena in Electronic Systems · doi:10.1109/itherm51669.2021.9503251 · Cited by 2
A Comprehensive Review of Aerogels for Oil Spill Cleanup and Heat Storage Applications
Kumari, K., & Chauhan, V. K. S. (2023) · Springer Proceedings in Materials · doi:10.1007/978-981-99-3844-5_17 · Cited by 2
Chen, J., He, F., Liu, Z., Hong, W., & Yang, W. (2025) · Fullerenes Nanotubes and Carbon Nanostructures · doi:10.1080/1536383x.2025.2455467 · Cited by 2
“An erythritol-based composite material prepared in this manner exhibited a high thermal conductivity of 3.44 W � m − 1 � K − 1 at a low graphene content of 1.23 vol% [21] .”
InfluentialSelımefendıgıl, F., & Oztop, H. F. (2021) · Energy Storage · doi:10.1002/est2.279 · Cited by 2
“Many methods have been offered to improve their conductivity.(9-13) Metals foams and highly conductive fins are offered as among the several methods to improve their performances.”
BackgroundMagalhães, F. D. (2018) · MDPI eBooks · doi:10.3390/books978-3-03897-042-2 · Cited by 2
Zhang, J., Talabany, Z. J., Hamali, W., Shafee, A., Nofal, T. A., & Musa, A. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104169 · Cited by 2
Biosynthetic and natural nanocarbon production
Patwary, M. A. M., Rahman, M. A., Haque, S. R., Ghos, B. C., Rahman, M. R., Matin, M. M., & Bakri, M. K. B. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-13981-9.00004-1 · Cited by 3
Phase Changing Materials Based Super Capacitors
Kazi, S. N. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-819723-3.00104-9 · Cited by 2
Jia, Q., Liu, Y., Fan, D., & Shi, L. (2021) · physica status solidi (a) · doi:10.1002/pssa.202100576 · Cited by 1
Self-citationEffect of Cu surface and graphene on the conformation of n-octadecane: a molecular dynamics study
Zhou, Y., Wang, W., Zhang, S., Sun, P., & He, Y. (2022) · Phase Transitions · doi:10.1080/01411594.2022.2103418 · Cited by 1
Engineering Phase Change Materials to Improve Their Properties and Broaden Applications
Doppiu, S., & del Barrio, E. P. (2024) · Wiley eBooks · doi:10.1002/9781394312528.ch5 · Cited by 2
Suhas, D. S., & Khullar, V. (2024) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2024.109493 · Cited by 1
Maroliya, M., & Saha, S. K. (2025) · I-THERM :/I-THERM - Intersociety Conference on Thermal Phenomena in Electronic Systems · doi:10.1109/itherm55376.2025.11235800 · Cited by 1
“Metal and graphite foams, known for their large specific surface areas, have also been effective in enhancing the thermal performance of PCM-based systems [20–26].”
Active managing: The emerging role of thermally responsive materials in battery systems
Crocomo, P. Z., Herreros, J., Lanceros-Méndez, S., & Salado, M. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.177539 · Cited by 1
Phase-change materials for thermal management
Wang, S., Chen, X., Han, H., Liu, Z., Ding, Y., Zou, R., & Li, T. (2026) · Nature Reviews Materials · doi:10.1038/s41578-026-00959-7 · Cited by 3
Thermal diffusivity identification based on an iterative regularization method
Attar, L., Perez, L., Nouailletas, R., Moulay, E., & Autrique, L. (2015) · IEEE Conference on Decision and Control (CDC) · doi:10.1109/cdc.2015.7402322 · Cited by 1
“For spe cific applications it may depends on space and time, as f or instance phase change materials [8] or nuclear fusi on plasmas [9,10].”
BackgroundAutomatic differentiation approach for property computations in nanoscale thermal transport
Marepalli, P., Mathur, S. R., & Murthy, J. Y. (2020) · Computer Physics Communications · doi:10.1016/j.cpc.2020.107138 · Cited by 1
The implementation of software and hardware for dynamic thermal management of electronic devices
Wang, R. Z., Pan, Q., Wu, S., Li, T., Li, B., & Wang, C. (2020) · Scientia Sinica Technologica · doi:10.1360/sst-2020-0083 · Cited by 2
New Phase Change Materials for Latent Heat Storage
del Barrio, E. P., & Achchaq, F. (2022) · Wiley eBooks · doi:10.1002/9781119239390.ch26 · Cited by 1
Shan, Z.-Y., An, M., Zhang, X., Zhang, H. F., & Ma, W. (2024) · Journal of Physics Condensed Matter · doi:10.1088/1361-648x/ad48ef · Cited by 1
“Moreover, various three dimensional thermally conductive porous networks such as metal foams, carbon-based sponges, and carbonized aerogels, have also been recently used to encapsulate PCMs and shown a higher PCM thermal energy transport boost [7, 8, 17–20].”
Functional Soft Materials with Resistance to Liquid Leakage for Thermal Energy Storage
Zhang, H., Fang, Q., Wang, F., Cao, B., Wang, L., He, W., Chen, S., & Wang, N. (2024) · Particle & Particle Systems Characterization · doi:10.1002/ppsc.202400031 · Cited by 1
New Studies on Thermal Transport in Metal Additive Manufacturing Processes and Products
Wei, W. L. C. (2017) · KiltHub Repository · doi:10.1184/r1/6720845 · Cited by 1
Sorption-based thermal energy storage on hierarchically porous carbon foams
Paul, R. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-814083-3.00004-4 · Cited by 1
Preparation and Characterization of Bio-based PCM Microcapsules for Thermal Energy Storage
Fashandi, M. (2018) · YorkSpace (York University) · Cited by 1
Funcionalización de textiles mediante la aplicación de grafeno
Ruiz-Calleja, T. (2021) · RiuNet (Universitat Politècnica de València) · doi:10.4995/thesis/10251/179634 · Cited by 2
Use of phase change materials in retail display cabinets to reduce the effect of defrosts.
Foster, A. M., Orlandi, M., Brown, T., & al., E. (2015) · Research Open (London South Bank University) · doi:10.18462/iir.icr.2015.0486
“Ji et al (2014) showed that it was possible to increase the conductivity of a PCM by 18 times by embedding continuous ultrathin-graphite foams.”
BackgroundMarepalli, P., Mathur, S. R., & Murthy, J. Y. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-817682-5.00008-8
Wilson, P. (2020) · Shodhganga
Designing with phase change materials for satellite thermal management
Li, W. H. (2021) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/151856
Kraiem, M. (2021) · theses.fr (ABES) · doi:10.70675/3a09a8bcz19f3z4900zb5d2za805271d7c73 · Cited by 1
Mousavi, S. M., Hosseini, F., & Sheikholeslami, M. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-21574-2.00007-1
An innovative examination of composite PCM capacitor
Fadida, M., & Raizner, M. (2024) · I-THERM :/I-THERM - Intersociety Conference on Thermal Phenomena in Electronic Systems · doi:10.1109/itherm55375.2024.10709529
“Several enhancement methods are employed to overcome this challenge, such as using nanoparticles dispersion in PCM [1] [2], micro-encapsulated PCM [3], PCM-graphite composites [4] or extending the PCM - conductor contact area.”
MethodA Novel Nano-Enhanced Pcm for Potential Zero-Emission Thermal Energy Conversion and StoragePreprint
Hayat, M. A., Yang, Y., Ali, H. M., & Chen, Y. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5257891
Li, S., Lv, S., Liu, Z., & Wang, T. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5446666
Lai, T., Qu, Z., Zhang, J., Meng, J., & Wang, H. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.128802 · Cited by 1
Performance enhancement of solar panels using nano with PCM
Naile, A. A., Hussein, H. A., & Numan, A. H. (2025) · AIP conference proceedings · doi:10.1063/5.0300490
Carbon Nanostructures in Paraffin-Based Thermal Energy Storage Systems
Shul’ga, Y. M. (2025) · High Energy Chemistry · doi:10.1134/s0018143925700560
Iso-cost-performance of thermal energy storage
Lim, J. W., Day, M., Cui, S., & Yee, S. K. (2025) · Journal of Physics Energy · doi:10.1088/2515-7655/ae2a6c
“These enhancements are attributed to the formation of efficient heat transfer pathways within the composite matrix [24–28].”
Innovative composite materials for heating, cooling and humidity control
Velasco-Carrasco, M. (2022) · Nottingham ePrints (University of Nottingham) · Cited by 1
Li, J., Zheng, S., Yu, Y., Li, J., Khalilov, U., Yakubov, Y. Y., Ibragimov, A., & Lu, H. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5451573
Performance analysis of PCM-enhanced solar air heaters
Shakir, R. M., Ekaid, A. L., & Hussein, H. M. (2026) · AIP conference proceedings · doi:10.1063/5.0316320
Trends in thermal energy storage
Wu, W., Ding, Z., & Sui, Y. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-34250-9.00013-3
Advanced absorption thermal energy storage for temperature upgrading
Wu, W., Ding, Z., & Sui, Y. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-34250-9.00004-2
Aluminum matrix nanocomposites for applications in automobile industry
Ma, B. (2021) · theses.fr (ABES) · doi:10.70675/5a7e4dccz82d7z45a5z8aedza853e10569c3 · Cited by 3
Li, J., Zheng, S., Yu, Y., Li, J., Khalilov, U., Yakubov, Y. Y., Ibragimov, A. B., & Lu, H. (2026) · ACS Applied Engineering Materials · doi:10.1021/acsaenm.6c00133
Sun, M., Song, Z., Cai, Z., Li, H., Hou, R., Bao, H., Deng, T., Tao, P., & Wang, Z. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.133014
Bai, T., Liu, X., Kong, L., Zhang, Y., Wang, J., & Ao, H. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.7151814
Qin, Y., Yin, M., Ding, L., Jiang, Z., Zhang, Y., Shen, K., Liu, J., & Ouyang, T. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.179739
Jiang, Q., Zhang, M., Gu, H., Huang, A., & Yang, S. (2026) · Ceramics International · doi:10.1016/j.ceramint.2026.08.322
Turjo, A. D., Jisu, R. N., & Deb, C. (2026) · Energy Storage · doi:10.1002/est2.70527
“However, the inadequate heat conductivity of PCMs constrains their efficacy as a thermal storage medium [7].”
Graphitized graphene aerogel-based phase change composites for cold energy storage
Hong, Q., Zhang, Y., Si, H., Xiao, L., Wu, J., Lin, X., Liu, Y., Qiu, L., & Jiang, L. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.182782
Macherzyńska, B., Pitera, A., Pakosz, J., Szatkowska, M., & Pielichowska, K. (2026) · Applied Sciences · doi:10.3390/app162110778
Metadata
- Authors
- Ji, H., Sellan, D. P., Pettes, M. T., Kong, X., Ji, J., Shi, L., & Ruoff, R. S.
- Affiliations
- The University of Texas at Austin (US)
- Corresponding author
- Shi, Li
- Ruoff, Rodney S.
- Venue
- Energy Environ. Sci.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014
- Volume
- 7
- Issue
- 3
- Pages
- 1185-1192
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2110264357
- Cited by
- 592
- References
- 39
- Citations by year
- 2026: 18 · 2025: 40 · 2024: 43 · 2023: 33 · 2022: 59 · 2021: 70 · 2020: 72 · 2019: 72 · 2018: 63 · 2017: 48 · 2016: 37 · 2015: 27 · 2014: 10
- FWCI
- 32.68
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Energy & Environmental Science (publishedVersion)
- Scholarworks@UNIST (Ulsan National Institute of Science and Technology) (submittedVersion)
- Funders
- U.S. Department of Energy
- Advanced Research Projects Agency
- Natural Sciences and Engineering Research Council of Canada
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
- Physical Sciences › Engineering › Mechanical Engineering › Adsorption and Cooling Systems
- Keywords
- phase change materials, thermal conductivity enhancement, thermal energy storage, melting point, latent heat storage
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.