The DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index.
Exceptional CO2capture in a hierarchically porous carbon with simultaneous high surface area and pore volume
Open accessAbstract
A new type of hierarchically porous carbon (HPC) structures of simultaneously high surface area and high pore volume has been synthesised from carefully controlled carbonization of in-house optimised metal–organic frameworks (MOFs). Changes in synthesis conditions lead to millimetre-sized MOF-5 crystals in a high yield. Subsequent carbonization of the MOFs yield HPCs with simultaneously high surface area, up to 2734 m2 g−1, and exceptionally high total pore volume, up to 5.53 cm3 g−1. In the HPCs, micropores are mostly retained and meso- and macro- pores are generated from defects in the individual crystals, which is made possible by structural inheritance from the MOF precursor. The resulting HPCs show a significant amount of CO2 adsorption, over 27 mmol g−1 (119 wt%) at 30 bar and 27 °C, which is one of the highest values reported in the literature for porous carbons. The findings are comparatively analysed with the literature. The results show great potential for the development of high capacity carbon-based sorbents for effective pre-combustion CO2 capture and other gas and energy storage applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Carbon Dioxide Capture in Metal–Organic Frameworks
Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T.-H., & Long, J. R. (2012) · Chemical Reviews · doi:10.1021/cr2003272 · Cited by 6,408
Carbon Dioxide Capture: Prospects for New Materials
D'Alessandro, D. M., Smit, B., & Long, J. R. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201000431 · Cited by 4,046
Ultrahigh Porosity in Metal-Organic Frameworks
Furukawa, H., Ko, N., Go, Y. B., Aratani, N., Choi, S. B., Choi, E., Yazaydin, A. Ö., Snurr, R. Q., O’Keeffe, M., Kim, J., et al. (2010) · Science · doi:10.1126/science.1192160 · Cited by 3,904
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Carbon dioxide capture-related gas adsorption and separation in metal-organic frameworks
Li, J.-R., Ma, Y., McCarthy, M. C., Sculley, J., Yu, J., Jeong, H.-K., Balbuena, P. B., & Zhou, H.-C. (2011) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2011.02.012 · Cited by 2,019
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
Worldwide innovations in the development of carbon capture technologies and the utilization of CO2
Markewitz, P., Kuckshinrichs, W., Leitner, W., Linssen, J., Zapp, P., Bongartz, R., Schreiber, A., & Müller, T. E. (2012) · Energy & Environmental Science · doi:10.1039/c2ee03403d · Cited by 1,202
Jiang, H.-L., Liu, B., Lan, Y.-Q., Kuratani, K., Akita, T., Shioyama, H., Zong, F., & Xu, Q. (2011) · Journal of the American Chemical Society · doi:10.1021/ja203184k · Cited by 1,197
Bourrelly, S., Llewellyn, P. L., Serre, C., Millange, F., Loiseau, T., & Férey, G. (2005) · Journal of the American Chemical Society · doi:10.1021/ja054668v · Cited by 1,105
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
Wen, Z., Wang, X., Mao, S., Bo, Z., Kim, H., Cui, S., Lu, G., Feng, X., & Chen, J. (2012) · Advanced Materials · doi:10.1002/adma.201201920 · Cited by 939
Carbon capture with ionic liquids: overview and progress
Zhang, X., Zhang, X., Dong, H., Zhao, Z., Zhang, S., & Huang, Y. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21152a · Cited by 863
Chaikittisilp, W., Ariga, K., & Yamauchi, Y. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00278g · Cited by 828
MOF-Derived Hierarchically Porous Carbon with Exceptional Porosity and Hydrogen Storage Capacity
Yang, S. J., Kim, T., Im, J. H., Kim, Y. S., Lee, K., Jung, H., & Park, C. R. (2012) · Chemistry of Materials · doi:10.1021/cm202554j · Cited by 749
Effect of pore size on carbon dioxide sorption by carbide derived carbon
Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01176f · Cited by 668
Direct Carbonization of Al-Based Porous Coordination Polymer for Synthesis of Nanoporous Carbon
Hu, M., Reboul, J., Furukawa, S., Torad, N. L., Ji, Q., Srinivasu, P., Ariga, K., Kitagawa, S., & Yamauchi, Y. (2012) · Journal of the American Chemical Society · doi:10.1021/ja208940u · Cited by 632
Zhang, Z., Zhao, Y., Gong, Q., Li, Z., & Li, J. (2013) · Chem. Commun. · doi:10.1039/c2cc35561b · Cited by 609
High-Pressure Adsorption Equilibria of Methane and Carbon Dioxide on Several Activated Carbons
Himeno, S., Komatsu, T., & Fujita, S. (2005) · Journal of Chemical & Engineering Data · doi:10.1021/je049786x · Cited by 592
Reducing the Cost of CO 2 Capture from Flue Gases Using Pressure Swing Adsorption
Ho, M. T., Allinson, G. W., & Wiley, D. E. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie070831e · Cited by 566
Hydrogen and Methane Adsorption in Metal−Organic Frameworks: A High-Pressure Volumetric Study
Zhou, W., Wu, H., Hartman, M. R., & Yildirim, T. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp074889i · Cited by 497
Self-citationWang, R., Wang, P., Yan, X., Lang, J., Peng, C., & Xue, Q. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am302077c · Cited by 475
Synthesis of graphene-like nanosheets and their hydrogen adsorption capacity
Gadipelli, S., Zhu, Y., Piner, R. D., Skipper, N. T., Ellerby, M., & Ruoff, R. S. (2009) · Carbon · doi:10.1016/j.carbon.2009.10.003 · Cited by 471
The urgency of the development of CO 2 capture from ambient air
Lackner, K. S., Brennan, S., Matter, J. M., Park, A.-H. A., Wright, A., & van der Zwaan, B. (2012) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1108765109 · Cited by 449
Activated Carbon Spheres for CO2 Adsorption
Wickramaratne, N. P., & Jaroniec, M. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400112m · Cited by 445
Graphene Oxide Framework Materials: Theoretical Predictions and Experimental Results
Burress, J. W., Gadipelli, S., Ford, J., Simmons, J. M., Zhou, W., & Yildirim, T. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201003328 · Cited by 421
Self-citationCarbon capture in metal–organic frameworks—a comparative study
Simmons, J. M., Wu, H., Zhou, W., & Yildirim, T. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00700e · Cited by 402
Self-citationCarbide‐Derived Carbons: Effect of Pore Size on Hydrogen Uptake and Heat of Adsorption
Yushin, G., Dash, R., Jagiello, J., Fischer, J. E., & Gogotsi, Y. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200500830 · Cited by 402
Recent advances in capture of carbon dioxide using alkali-metal-based oxides
Wang, S., Yan, S., Ma, X., & Gong, J. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01116b · Cited by 382
Xi, K., Cao, S., Peng, X., Ducati, C., Vasant Kumar, R., & Cheetham, A. K. (2013) · Chemical Communications · doi:10.1039/c3cc38009b · Cited by 376
Last chance for carbon capture and storage
Scott, V., Gilfillan, S., Markusson, N., Chalmers, H., & Haszeldine, R. S. (2013) · Nature Climate Change · doi:10.1038/nclimate1695 · Cited by 376
Recent advances in carbon dioxide capture with metal‐organic frameworks
Liu, Y., Wang, Z. U., & Zhou, H. (2012) · Greenhouse Gases: Science and Technology · doi:10.1002/ghg.1296 · Cited by 357
Chandra, V., Yu, S. U., Kim, S. H., Yoon, Y. S., Kim, D. Y., Kwon, A. H., Meyyappan, M., & Kim, K. S. (2012) · Chem. Commun. · doi:10.1039/c1cc15599g · Cited by 340
Materials challenges for the development of solid sorbents for post-combustion carbon capture
Drage, T. C., Snape, C. E., Stevens, L. A., Wood, J., Wang, J., Cooper, A. I., Dawson, R., Guo, X., Satterley, C., & Irons, R. (2012) · J. Mater. Chem. · doi:10.1039/c2jm12592g · Cited by 292
Nandi, M., Okada, K., Dutta, A., Bhaumik, A., Maruyama, J., Derks, D., & Uyama, H. (2012) · Chemical Communications · doi:10.1039/c2cc35334b · Cited by 278
Critical role of small micropores in high CO2 uptake
Zhang, Z., Zhou, J., Xing, W., Xue, Q., Yan, Z., Zhuo, S., & Qiao, S. Z. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp44436d · Cited by 263
Porous graphene oxide frameworks: Synthesis and gas sorption properties
Srinivas, G., Burress, J. W., Ford, J., & Yildirim, T. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm11699a · Cited by 243
Self-citationHigh Surface Area, sp2-Cross-Linked Three-Dimensional Graphene Monoliths
Worsley, M. A., Olson, T. Y., Lee, J. R. I., Willey, T. M., Nielsen, M. H., Roberts, S. K., Pauzauskie, P. J., Biener, J., Satcher, J. H., & Baumann, T. F. (2011) · The Journal of Physical Chemistry Letters · doi:10.1021/jz200223x · Cited by 230
CO2 adsorption by activated templated carbons
Sevilla, M., & Fuertes, A. B. (2012) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2011.09.038 · Cited by 229
Hu, X., Radosz, M., Cychosz, K. A., & Thommes, M. (2011) · Environmental Science & Technology · doi:10.1021/es200782s · Cited by 224
Enhancement of CO2 adsorption on high surface area activated carbon modified by N2, H2 and ammonia
Zhang, Z., Xu, M., Wang, H., & Li, Z. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.03.070 · Cited by 194
Ultrahigh CO2 adsorption capacity on carbon molecular sieves at room temperature
Silvestre-Albero, J., Wahby, A., Sepúlveda-Escribano, A., Martínez-Escandell, M., Kaneko, K., & Rodríguez-Reinoso, F. (2011) · Chemical Communications · doi:10.1039/c1cc11618e · Cited by 184
Graphene oxide derived carbons (GODCs): synthesis and gas adsorption properties
Srinivas, G., Burress, J., & Yildirim, T. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21100a · Cited by 179
Self-citationEvaluation of Activated Carbon Adsorbents for CO2Capture in Gasification
Drage, T. C., Blackman, J. M., Pevida, C., & Snape, C. E. (2009) · Energy & Fuels · doi:10.1021/ef8010614 · Cited by 175
Carbon Dioxide Adsorption Isotherms on Activated Carbons
Saha, B. B., Jribi, S., Koyama, S., & El-Sharkawy, I. I. (2011) · Journal of Chemical & Engineering Data · doi:10.1021/je100973t · Cited by 166
Graphene‐Based Porous Silica Sheets Impregnated with Polyethyleneimine for Superior CO2 Capture
Yang, S., Zhan, L., Xu, X., Wang, Y., Ling, L., & Feng, X. (2013) · Advanced Materials · doi:10.1002/adma.201204427 · Cited by 162
Hierarchical porous polyacrylonitrile-based activated carbon fibers for CO2 capture
Shen, W., Zhang, S., He, Y., Li, J., & Fan, W. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12585k · Cited by 154
Peng, Y., Gadipelli, S., Wilmer, C. E., Eryazici, I., Snurr, R. Q., Hupp, J. T., Yildirim, T., & Farha, O. K. (2013) · Chemical Communications · doi:10.1039/c3cc40819a · Cited by 146
Self-citationMOF-5 and activated carbons as adsorbents for gas storage
Marco-Lozar, J. P., Juan-Juan, J., Suárez‐García, F., Cazorla‐Amorós, D., & Linares-Solano, A. (2011) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.11.023 · Cited by 137
Activated carbon monoliths for gas storage at room temperature
Marco-Lozar, J. P., Kunowsky, M., Suárez‐García, F., Carruthers, J. D., & Linares-Solano, A. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22769j · Cited by 132
Shao, X., Feng, Z., Xue, R., Ma, C., Wang, W., Peng, X., & Cao, D. (2010) · AIChE Journal · doi:10.1002/aic.12515 · Cited by 105
Masika, E., & Mokaya, R. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp3100365 · Cited by 101
Hierarchical Graphene-Based Material for Over 4.0 Wt % Physisorption Hydrogen Storage Capacity
Guo, C., Wang, Y., & Li, C. M. (2012) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc3000306 · Cited by 92
High-pressure separation of CH4/CO2 using activated carbon
Grande, C. A., Blom, R., Möller, A., & Möllmer, J. (2012) · Chemical Engineering Science · doi:10.1016/j.ces.2012.11.024 · Cited by 89
Microporous carbon adsorbents with high CO2 capacities for industrial applications
Builes, S., Roussel, T., Ghimbeu, C. M., Parmentier, J., Gadiou, R., Vix‐Guterl, C., & Vega, L. F. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c1cp21673b · Cited by 58
Cited by
Sun, M.-H., Huang, S.-Z., Chen, L.-H., Li, Y., Yang, X.-Y., Yuan, Z.-Y., & Su, B.-L. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00135a · Cited by 1,454
Hierarchically porous materials: synthesis strategies and structure design
Yang, X.-Y., Chen, L.-H., Li, Y., Rooke, J. C., Sanchez, C., & Su, B.-L. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00829a · Cited by 1,439
Dutta, S., Bhaumik, A., & Wu, K. C.-W. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01075b · Cited by 1,413
Nanoarchitectured Design of Porous Materials and Nanocomposites from Metal‐Organic Frameworks
Kaneti, Y. V., Tang, J., Salunkhe, R. R., Jiang, X., Yu, A., Wu, K. C. ‐., & Yamauchi, Y. (2017) · Advanced Materials · doi:10.1002/adma.201604898 · Cited by 888
Graphene-based materials: Synthesis and gas sorption, storage and separation
Gadipelli, S., & Guo, Z. X. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.10.004 · Cited by 734
Self-citation
Metadata
- Authors
- Srinivas, G., Krungleviciute, V., Guo, Z.-X., & Yildirim, T.
- Venue
- Energy Environ. Sci.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014
- Volume
- 7
- Issue
- 1
- Pages
- 335-342
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2135487064
- Cited by
- 428
- References
- 54
- FWCI
- 46.94
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.