The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
A perspective on the high-voltage LiMn1.5Ni0.5O4 spinel cathode for lithium-ion batteries
Abstract
The LiMn1.5Ni0.5O4 spinel is an attractive cathode candidate for next generation lithium-ion batteries as it offers high power capability with an operating voltage of ∼4.7 V and a capacity of ∼135 mA h g−1. However, its commercialization is plagued by severe capacity fade, particularly at elevated temperatures, in full cells employing a graphite anode. This perspective article provides an overview of the recent developments on understanding various factors that influence the electrochemical performance of the high-voltage spinel cathodes. The factors include the degree of cation ordering, Mn3+ content, morphology, and surface planes/compositions in contact with the electrolyte, which are influenced by synthesis and annealing conditions as well as cation doping. For example, samples with a {111} family of surface planes show superior performance. Recent magnetic measurements and examination of discharge profiles below 3 V have become valuable to get a more precise measure of the degree of cation ordering. Also, surface modifications and electrolyte additives have shown marginal gains. Although acceptable performances have been obtained in half-cells with a metallic lithium anode, capacity fade is seen in full cells with a graphite anode due to metal dissolution at the high operating voltage of 4.7 V and Li+ consumption by the steadily forming solid–electrolyte interphase (SEI) layer promoted by Mn/Ni deposition on the graphite surface. Based on the current understanding, future directions are pointed out.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Aurbach, D., Markovsky, B., Salitra, G., Markevich, E., Talyossef, Y., Koltypin, M., Nazar, L., Ellis, B., & Kovacheva, D. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.10.025 · Cited by 706
Pieczonka, N. P. W., Liu, Z., Lu, P., Olson, K. L., Moote, J., Powell, B. R., & Kim, J. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp405158m · Cited by 629
Who will drive electric vehicles, olivine or spinel?
Park, O. K., Cho, Y., Lee, S., et al. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00559b · Cited by 617
Fluorinated electrolytes for 5 V lithium-ion battery chemistry
Zhang, Z., Hu, L., Wu, H., Weng, W., Koh, M., Redfern, P. C., Curtiss, L. A., & Amine, K. (2013) · Energy & Environmental Science · doi:10.1039/c3ee24414h · Cited by 583
Hosono, E., Kudo, T., Honma, I., Matsuda, H., & Zhou, H. (2009) · Nano Letters · doi:10.1021/nl803394v · Cited by 514
Yang, L., Ravdel, B., & Lucht, B. L. (2010) · Electrochemical and Solid-State Letters · doi:10.1149/1.3428515 · Cited by 508
Dynamic Structural Changes at LiMn2O4/Electrolyte Interface during Lithium Battery Reaction
Hirayama, M., Ido, H., Kim, K., et al. (2010) · Journal of the American Chemical Society · doi:10.1021/ja105389t · Cited by 375
A high-rate long-life Li4Ti5O12/Li[Ni0.45Co0.1Mn1.45]O4 lithium-ion battery
Jung, H., Jang, M. W., Hassoun, J., Sun, Y., & Scrosati, B. (2011) · Nature Communications · doi:10.1038/ncomms1527 · Cited by 355
A Truncated Manganese Spinel Cathode for Excellent Power and Lifetime in Lithium-Ion Batteries
Kim, J.-S., Kim, K., Cho, W., Shin, W. H., Kanno, R., & Choi, J. W. (2012) · Nano Letters · doi:10.1021/nl303619s · Cited by 307
Cited by
A reflection on lithium-ion battery cathode chemistry
Manthiram, A. (2020) · Nature Communications · doi:10.1038/s41467-020-15355-0 · Cited by 2,796
Self-citationAn Outlook on Lithium Ion Battery Technology
Manthiram, A. (2017) · ACS Central Science · doi:10.1021/acscentsci.7b00288 · Cited by 1,771
Self-citationHigh-voltage positive electrode materials for lithium-ion batteries
Li, W., Song, B., & Manthiram, A. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00875e · Cited by 1,339
Self-citationUnderstanding interface stability in solid-state batteries
Xiao, Y., Wang, Y., Bo, S.-H., Kim, J. C., Miara, L. J., & Ceder, G. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0157-5 · Cited by 1,219
Understanding electrochemical potentials of cathode materials in rechargeable batteries
Liu, C., Neale, Z. G., & Cao, G. (2016) · Materials Today · doi:10.1016/j.mattod.2015.10.009 · Cited by 1,156
Review—Superconcentrated Electrolytes for Lithium Batteries
Yamada, Y., & Yamada, A. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0041514jes · Cited by 821
Future generations of cathode materials: an automotive industry perspective
Andre, D., Kim, S.-J., Lamp, P., Lux, S. F., Maglia, F., Paschos, O., & Stiaszny, B. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00361j · Cited by 806
Insertion-Type Electrodes for Nonaqueous Li-Ion Capacitors
Aravindan, V., Gnanaraj, J., Lee, Y.-S., & Madhavi, S. (2014) · Chemical Reviews · doi:10.1021/cr5000915 · Cited by 726
Radin, M. D., Hy, S., Sina, M., Fang, C., Liu, H., Vinckeviciute, J., Zhang, M., Whittingham, M. S., Meng, Y. S., & Van der Ven, A. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602888 · Cited by 677
Electrode–electrolyte interfaces in lithium-based batteries
Yu, X., & Manthiram, A. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02555f · Cited by 649
Self-citationTwo‐Dimensional Materials for Beyond‐Lithium‐Ion Batteries
Peng, L., Zhu, Y., Chen, D., Ruoff, R. S., & Yu, G. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600025 · Cited by 645
Advances in the Cathode Materials for Lithium Rechargeable Batteries
Lee, W., Muhammad, S., Sergey, C., Lee, H., Yoon, J., Kang, Y., & Yoon, W. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201902359 · Cited by 577
Li, W., Dolocan, A., Oh, P., Celio, H., Park, S., Cho, J., & Manthiram, A. (2017) · Nature Communications · doi:10.1038/ncomms14589 · Cited by 466
Self-citationComputational Screening of Cathode Coatings for Solid-State Batteries
Xiao, Y., Miara, L. J., Wang, Y., & Ceder, G. (2019) · Joule · doi:10.1016/j.joule.2019.02.006 · Cited by 451
Yi, T.-F., Mei, J., & Zhu, Y.-R. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.03.070 · Cited by 398
A carbonate-free, sulfone-based electrolyte for high-voltage Li-ion batteries
Alvarado, J., Schroeder, M. A., Zhang, M., Borodin, O., Gobrogge, E., Olguin, M., Ding, M. S., Gobet, M., Greenbaum, S., Meng, Y. S., et al. (2018) · Materials Today · doi:10.1016/j.mattod.2018.02.005 · Cited by 385
Du, H., Wang, Y., Kang, Y., Zhao, Y., Tian, Y., Wang, X., Tan, Y., Liang, Z., Wozny, J., Li, T., et al. (2024) · Advanced Materials · doi:10.1002/adma.202401482 · Cited by 376
Lithium Manganese Spinel Cathodes for Lithium‐Ion Batteries
Huang, Y., Dong, Y., Li, S., Lee, J., Wang, C., Zhu, Z., Xue, W., Li, Y., & Li, J. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000997 · Cited by 374
Ma, J., Hu, P., Cui, G., & Chen, L. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00948 · Cited by 352
Oxygen Loss in Layered Oxide Cathodes for Li-Ion Batteries: Mechanisms, Effects, and Mitigation
Zhang, H., Liu, H., Piper, L. F. J., Whittingham, M. S., & Zhou, G. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00327 · Cited by 338
Kim, Y., Seong, W. M., & Manthiram, A. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.09.020 · Cited by 299
Self-citationChoi, N.-S., Han, J.-G., Ha, S.-Y., Park, I., & Back, C.-K. (2015) · RSC Advances · doi:10.1039/c4ra11575a · Cited by 297
Lithium Extraction Mechanism in Li-Rich Li2MnO3 Involving Oxygen Hole Formation and Dimerization
Chen, H., & Islam, M. S. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02870 · Cited by 294
Oh, G., Hirayama, M., Kwon, O., Suzuki, K., & Kanno, R. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04940 · Cited by 278
Boaretto, N., Garbayo, I., Valiyaveettil-SobhanRaj, S., Quintela, A., Li, C., Casas-Cabanas, M., & Aguesse, F. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229919 · Cited by 271
Yang, T., Fan, W., Wang, C., Lei, Q., Ma, Z., Yu, L., Zuo, X., & Nan, J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b04743 · Cited by 92
Metadata
- Authors
- Manthiram, A., Chemelewski, K., & Lee, E.-S.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014
- Volume
- 7
- Issue
- 4
- Pages
- 1339
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W1987405424
- Cited by
- 625
- References
- 38
- FWCI
- 27.76
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.