The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Sulfur embedded in metal organic framework-derived hierarchically porous carbon nanoplates for high performance lithium–sulfur battery
Abstract
The wide-scale implementation of lithium–sulfur batteries is limited by their rapid capacity fading, which is induced by the pulverization of the sulfur cathode and dissolution of intermediate polysulfides. Herein, we reported the encapsulation of sulfur (S) into hierarchically porous carbon nanoplates (HPCN) derived from one-step pyrolysis of metal-organic frameworks (MOF-5). HPCN with an average thickness of ca. 50 nm exhibits a three-dimensional (3D) hierarchically porous nanostructure, high specific surface area (1645 m2 g−1) and large pore volume (1.18 cm3 g−1). When evaluated as a cathode for lithium–sulfur batteries, the HPCN–S composite demonstrates high specific capacity and excellent cycling performance. At a current rate of 0.1 C, the initial discharge capacity of HPCN–S is 1177 mA h g−1. Even at a current rate of 0.5 C, it still delivers a discharge capacity of 730 mA h g−1 after 50 cycles and the Coulombic efficiency is up to 97%. The enhanced electrochemical performance of HPCN–S is closely related to its well-defined 3D porous plate nanostructure which not only provides stable electronic and ionic transfer channels, but also plays a key role as a strong absorbent to retain polysulfides and accommodate volume variation during the charge–discharge process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Design and synthesis of an exceptionally stable and highly porous metal-organic framework
Li, H., Eddaoudi, M., O'Keeffe, M., & Yaghi, O. M. (1999) · Nature · doi:10.1038/46248 · Cited by 8,554
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
KOH activation of carbon-based materials for energy storage
Wang, J., & Kaskel, S. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm34066f · Cited by 2,726
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
Smaller Sulfur Molecules Promise Better Lithium–Sulfur Batteries
Xin, S., Gu, L., Zhao, N.-H., Yin, Y.-X., Zhou, L.-J., Guo, Y.-G., & Wan, L.-J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja308170k · Cited by 1,644
Zhang, B., Qin, X., Li, G. R., & Gao, X. P. (2010) · Energy & Environmental Science · doi:10.1039/c002639e · Cited by 1,280
Spherical Ordered Mesoporous Carbon Nanoparticles with High Porosity for Lithium–Sulfur Batteries
Schuster, J., He, G., Mandlmeier, B., Yim, T., Lee, K. T., Bein, T., & Nazar, L. F. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201107817 · Cited by 1,114
Xiao, L., Cao, Y., Xiao, J., Schwenzer, B., Engelhard, M. H., Saraf, L. V., Nie, Z., Exarhos, G. J., & Liu, J. (2012) · Advanced Materials · doi:10.1002/adma.201103392 · Cited by 1,016
Hong, D., Hwang, Y. K., Serre, C., Férey, G., & Chang, J. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801130 · Cited by 978
Cited by
Xia, W., Mahmood, A., Zou, R., & Xu, Q. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00762c · Cited by 1,717
Sun, M.-H., Huang, S.-Z., Chen, L.-H., Li, Y., Yang, X.-Y., Yuan, Z.-Y., & Su, B.-L. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00135a · Cited by 1,454
Development of MOF-Derived Carbon-Based Nanomaterials for Efficient Catalysis
Shen, K., Chen, X., Chen, J., & Li, Y. (2016) · ACS Catalysis · doi:10.1021/acscatal.6b01222 · Cited by 1,334
Metal–organic frameworks for energy storage: Batteries and supercapacitors
Wang, L., Han, Y., Feng, X., Zhou, J., Qi, P., & Wang, B. (2016) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2015.09.002 · Cited by 1,298
Nanomaterials derived from metal–organic frameworks
Dang, S., Zhu, Q.-L., & Xu, Q. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.75 · Cited by 1,230
Cao, X., Tan, C., Sindoro, M., & Zhang, H. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00426a · Cited by 1,008
Zhang, H., Nai, J., Yu, L., & Lou, X. W. (. (2017) · Joule · doi:10.1016/j.joule.2017.08.008 · Cited by 843
Zhang, L., Su, Z., Jiang, F., Yang, L., Qian, J., Zhou, Y., Li, W., & Hong, M. (2014) · Nanoscale · doi:10.1039/c4nr00348a · Cited by 814
Zhang, P., Sun, F., Xiang, Z., Shen, Z., Yun, J., & Cao, D. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42799d · Cited by 781
Functional materials derived from open framework templates/precursors: synthesis and applications
Sun, J.-K., & Xu, Q. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00517a · Cited by 687
Porous Carbons: Structure‐Oriented Design and Versatile Applications
Tian, W., Zhang, H., Duan, X., Sun, H., Shao, G., & Wang, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909265 · Cited by 657
Biomass-derived porous carbon materials with sulfur and nitrogen dual-doping for energy storage
Xu, G., Han, J., Ding, B., Nie, P., Pan, J., Dou, H., Li, H., & Zhang, X. (2015) · Green Chemistry · doi:10.1039/c4gc02185a · Cited by 649
Self-citationMetal organic frameworks for energy storage and conversion
Zhao, Y., Song, Z., Li, X., Sun, Q., Cheng, N., Lawes, S., & Sun, X. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2015.11.005 · Cited by 621
Applications of Metal–Organic‐Framework‐Derived Carbon Materials
Yang, W., Li, X., Li, Y., Zhu, R., & Pang, H. (2019) · Advanced Materials · doi:10.1002/adma.201804740 · Cited by 539
Wang, C., Kaneti, Y. V., Bando, Y., Lin, J., Liu, C., Li, J., & Yamauchi, Y. (2018) · Materials Horizons · doi:10.1039/c8mh00133b · Cited by 533
Exploring metal organic frameworks for energy storage in batteries and supercapacitors
Xu, G., Nie, P., Dou, H., Ding, B., Li, L., & Zhang, X. (2017) · Materials Today · doi:10.1016/j.mattod.2016.10.003 · Cited by 512
Self-citationMetal–Organic Frameworks (MOFs) and MOF-Derived Materials for Energy Storage and Conversion
Zhang, X., Chen, A., Zhong, M., Zhang, Z., Zhang, X., Zhou, Z., & Bu, X.-H. (2019) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0024-x · Cited by 481
Self-citationZhang, Z., Kong, L., Liu, S., Li, G., & Gao, X. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602543 · Cited by 472
Recent advances in lithium–sulfur batteries
Chen, L., & Shaw, L. L. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.111 · Cited by 432
Al2O3-coated porous separator for enhanced electrochemical performance of lithium sulfur batteries
Zhang, Z., Lai, Y., Zhang, Z., Zhang, K., & Li, J. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.02.077 · Cited by 418
Chen, R., Zhao, T., Lu, J., Wu, F., Li, L., Chen, J., Tan, G., Ye, Y., & Amine, K. (2013) · Nano Letters · doi:10.1021/nl4016683 · Cited by 401
Embedding Sulfur in MOF‐Derived Microporous Carbon Polyhedrons for Lithium–Sulfur Batteries
Wu, H. B., Wei, S., Zhang, L., Xu, R., Hng, H. H., & Lou, X. W. (. (2013) · Chemistry – A European Journal · doi:10.1002/chem.201301689 · Cited by 386
Recent progress on MOF‐derived carbon materials for energy storage
Ren, J., Huang, Y., Zhu, H., Zhang, B., Zhu, H., Shen, S., Tan, G., Wu, F., He, H., Lan, S., et al. (2020) · Carbon Energy · doi:10.1002/cey2.44 · Cited by 383
Metal–organic frameworks for lithium–sulfur batteries
Zheng, Y., Zheng, S., Xue, H., & Pang, H. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta11075a · Cited by 351
Exploiting a robust biopolymer network binder for an ultrahigh-areal-capacity Li–S battery
Liu, J., Galpaya, D. G. D., Yan, L., Sun, M., Lin, Z., Yan, C., Liang, C., & Zhang, S. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03033e · Cited by 347
A Revolution in Electrodes: Recent Progress in Rechargeable Lithium–Sulfur Batteries
Fang, X., & Peng, H. (2015) · Small · doi:10.1002/smll.201402354 · Cited by 346
Jeon, J.-W., Sharma, R., Meduri, P., Arey, B. W., Schaef, H. T., Lutkenhaus, J. L., Lemmon, J. P., Thallapally, P. K., Nandasiri, M. I., McGrail, B. P., et al. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am500339x · Cited by 325
High performance lithium–sulfur batteries: advances and challenges
Xu, G., Ding, B., Pan, J., Nie, P., Shen, L., & Zhang, X. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02097a · Cited by 297
Self-citationNanostructured positive electrode materials for post-lithium ion batteries
Wang, F., Wu, X., Li, C., Zhu, Y., Fu, L., Wu, Y., & Liu, X. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02070d · Cited by 293
Zhang, J., Xiang, J., Dong, Z., Liu, Y., Wu, Y., Xu, C., & Du, G. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2013.11.035 · Cited by 288
Cathode materials for lithium–sulfur batteries: a practical perspective
Eftekhari, A., & Kim, D.-W. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00799j · Cited by 285
Shrivastav, V., Sundriyal, S., Goel, P., Kaur, H., Tuteja, S. K., Vikrant, K., Kim, K.-H., Tiwari, U. K., & Deep, A. (2019) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2019.05.006 · Cited by 284
Prussian blue analogues: a new class of anode materials for lithium ion batteries
Nie, P., Shen, L., Luo, H., Ding, B., Xu, G., Wang, J., & Zhang, X. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta00062e · Cited by 280
Self-citation12 years roadmap of the sulfur cathode for lithium sulfur batteries (2009–2020)
Liu, T., Hu, H., Ding, X., Yuan, H., Jin, C., Nai, J., Liu, Y., Wang, Y., Wan, Y., & Tao, X. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.05.023 · Cited by 278
Bao, W., Su, D., Zhang, W., Guo, X., & Wang, G. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201603704 · Cited by 255
Xu, X., Shi, W., Li, P., Ye, S., Ye, C., Ye, H., Lu, T., Zheng, A., Zhu, J., Xu, L., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b01947 · Cited by 255
Xiang, Y., Lu, L., Kottapalli, A. G. P., & Pei, Y. (2022) · Carbon Energy · doi:10.1002/cey2.185 · Cited by 253
Metadata
- Authors
- Xu, G., Ding, B., Shen, L., Nie, P., Han, J., & Zhang, X.
- Venue
- Journal of Materials Chemistry A
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 1
- Issue
- 14
- Pages
- 4490
- ISSN
- 2050-7488 (ISSN-L)
- 2050-7496
- OpenAlex
- W2037429215
- Cited by
- 284
- References
- 40
- FWCI
- 21.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.