The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Sulfur embedded in metal organic framework-derived hierarchically porous carbon nanoplates for high performance lithium–sulfur battery
Abstract
The wide-scale implementation of lithium–sulfur batteries is limited by their rapid capacity fading, which is induced by the pulverization of the sulfur cathode and dissolution of intermediate polysulfides. Herein, we reported the encapsulation of sulfur (S) into hierarchically porous carbon nanoplates (HPCN) derived from one-step pyrolysis of metal-organic frameworks (MOF-5). HPCN with an average thickness of ca. 50 nm exhibits a three-dimensional (3D) hierarchically porous nanostructure, high specific surface area (1645 m2 g−1) and large pore volume (1.18 cm3 g−1). When evaluated as a cathode for lithium–sulfur batteries, the HPCN–S composite demonstrates high specific capacity and excellent cycling performance. At a current rate of 0.1 C, the initial discharge capacity of HPCN–S is 1177 mA h g−1. Even at a current rate of 0.5 C, it still delivers a discharge capacity of 730 mA h g−1 after 50 cycles and the Coulombic efficiency is up to 97%. The enhanced electrochemical performance of HPCN–S is closely related to its well-defined 3D porous plate nanostructure which not only provides stable electronic and ionic transfer channels, but also plays a key role as a strong absorbent to retain polysulfides and accommodate volume variation during the charge–discharge process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Design and synthesis of an exceptionally stable and highly porous metal-organic framework
Li, H., Eddaoudi, M., O'Keeffe, M., & Yaghi, O. M. (1999) · Nature · doi:10.1038/46248 · Cited by 8,554
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
KOH activation of carbon-based materials for energy storage
Wang, J., & Kaskel, S. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm34066f · Cited by 2,726
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
Smaller Sulfur Molecules Promise Better Lithium–Sulfur Batteries
Xin, S., Gu, L., Zhao, N.-H., Yin, Y.-X., Zhou, L.-J., Guo, Y.-G., & Wan, L.-J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja308170k · Cited by 1,644
Zhang, B., Qin, X., Li, G. R., & Gao, X. P. (2010) · Energy & Environmental Science · doi:10.1039/c002639e · Cited by 1,280
Spherical Ordered Mesoporous Carbon Nanoparticles with High Porosity for Lithium–Sulfur Batteries
Schuster, J., He, G., Mandlmeier, B., Yim, T., Lee, K. T., Bein, T., & Nazar, L. F. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201107817 · Cited by 1,114
Xiao, L., Cao, Y., Xiao, J., Schwenzer, B., Engelhard, M. H., Saraf, L. V., Nie, Z., Exarhos, G. J., & Liu, J. (2012) · Advanced Materials · doi:10.1002/adma.201103392 · Cited by 1,016
Hong, D., Hwang, Y. K., Serre, C., Férey, G., & Chang, J. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801130 · Cited by 978
Elazari, R., Salitra, G., Garsuch, A., Panchenko, A., & Aurbach, D. (2011) · Advanced Materials · doi:10.1002/adma.201103274 · Cited by 895
Metal organic frameworks for electrochemical applications
Morozan, A., & Jaouen, F. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22989g · Cited by 870
Stabilizing lithium–sulphur cathodes using polysulphide reservoirs
Ji, X., Evers, S., Black, R., & Nazar, L. F. (2011) · Nature Communications · doi:10.1038/ncomms1293 · Cited by 864
Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery
Liang, C., Dudney, N. J., & Howe, J. Y. (2009) · Chemistry of Materials · doi:10.1021/cm902050j · Cited by 862
MOF-Derived Hierarchically Porous Carbon with Exceptional Porosity and Hydrogen Storage Capacity
Yang, S. J., Kim, T., Im, J. H., Kim, Y. S., Lee, K., Jung, H., & Park, C. R. (2012) · Chemistry of Materials · doi:10.1021/cm202554j · Cited by 749
Chaikittisilp, W., Hu, M., Wang, H., Huang, H.-S., Fujita, T., Wu, K. C.-W., Chen, L.-C., Yamauchi, Y., & Ariga, K. (2012) · Chemical Communications · doi:10.1039/c2cc33433j · Cited by 683
Fang, Y., Gu, D., Zou, Y., Wu, Z., Li, F., Che, R., Deng, Y., Tu, B., & Zhao, D. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201002849 · Cited by 680
Direct Carbonization of Al-Based Porous Coordination Polymer for Synthesis of Nanoporous Carbon
Hu, M., Reboul, J., Furukawa, S., Torad, N. L., Ji, Q., Srinivasu, P., Ariga, K., Kitagawa, S., & Yamauchi, Y. (2012) · Journal of the American Chemical Society · doi:10.1021/ja208940u · Cited by 632
Porous carbon nanofiber–sulfur composite electrodes for lithium/sulfur cells
Ji, L., Rao, M., Aloni, S., Wang, L., Cairns, E. J., & Zhang, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee02256c · Cited by 602
Gao, J., Lowe, M. A., Kiya, Y., & Abruña, H. D. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp207714c · Cited by 600
Zhou, G., Wang, D.-W., Li, F., Hou, P.-X., Yin, L., Liu, C., Lu, G. Q. (., Gentle, I. R., & Cheng, H.-M. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22294a · Cited by 518
Wang, D., Li, F., Liu, M., Lu, G. Q., & Cheng, H. (2008) · Angewandte Chemie · doi:10.1002/ange.200702721 · Cited by 493
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie · doi:10.1002/ange.201100637 · Cited by 487
Phosphorous Pentasulfide as a Novel Additive for High‐Performance Lithium‐Sulfur Batteries
Lin, Z., Liu, Z., Fu, W., Dudney, N. J., & Liang, C. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200696 · Cited by 450
Wei, H., Deng, S., Hu, B., Chen, Z., Wang, B., Huang, J., & Yu, G. (2012) · ChemSusChem · doi:10.1002/cssc.201200570 · Cited by 421
Xu, B., Hou, S., Cao, G., Wu, F., & Yang, Y. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32759g · Cited by 404
Wei, S., Zhang, H., Huang, Y., et al. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00505c · Cited by 339
An Advanced Lithium‐Sulfur Battery
Kim, J., Lee, D. J., Jung, H., Sun, Y., Hassoun, J., & Scrosati, B. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200689 · Cited by 329
Banerjee, A., Gokhale, R., Bhatnagar, S., Jog, J., Bhardwaj, M., Lefez, B., Hannoyer, B., & Ogale, S. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm33798c · Cited by 324
Wang, D.-W., Zhou, G., Li, F., Wu, K.-H., Lu, G. Q. (., Cheng, H.-M., & Gentle, I. R. (2012) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp40808b · Cited by 296
Confining Sulfur in Double‐Shelled Hollow Carbon Spheres for Lithium–Sulfur Batteries
Zhang, C., Wu, H. B., Yuan, C., Guo, Z., & Lou, X. W. (. (2012) · Angewandte Chemie · doi:10.1002/ange.201205292 · Cited by 284
Synthesis and Electrochemical Performance of Sulfur/Highly Porous Carbon Composites
Lai, C., Gao, X. P., Zhang, B., Yan, T. Y., & Zhou, Z. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp809473e · Cited by 265
Enhanced Cyclability for Sulfur Cathode Achieved by a Water-Soluble Binder
He, M., Yuan, L.-X., Zhang, W.-X., Hu, X.-L., & Huang, Y.-H. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp2043416 · Cited by 226
Ding, B., Yuan, C., Shen, L., Xu, G., Nie, P., & Zhang, X. (2013) · Chemistry – A European Journal · doi:10.1002/chem.201202127 · Cited by 223
Self-citationTao, X., Chen, X., Xia, Y., Huang, H., Gan, Y., Wu, R., Chen, F., & zhang, W. (2013) · Journal of Materials Chemistry A · doi:10.1039/c2ta01213h · Cited by 212
Porous carbon materials with a controllable surface area synthesized from metal–organic frameworks
Lim, S., Suh, K., Kim, Y., Yoon, M., Park, H., Dybtsev, D. N., & Kim, K. (2012) · Chemical Communications · doi:10.1039/c2cc33439a · Cited by 204
Ding, B., Yuan, C., Shen, L., Xu, G., Nie, P., Lai, Q., & Zhang, X. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00396a · Cited by 191
Self-citationSelf-weaving sulfur–carbon composite cathodes for high rate lithium–sulfur batteries
Su, Y.-S., Fu, Y., & Manthiram, A. (2012) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp42796f · Cited by 184
Schneider, H., Garsuch, A., Panchenko, A. A., et al. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.12.061 · Cited by 123
High capacity cathode materials for Li–S batteries
Ryu, H.-S., Park, J. W., Park, J., et al. (2012) · Journal of Materials Chemistry A · doi:10.1039/c2ta00056c · Cited by 85
Cited by
Xia, W., Mahmood, A., Zou, R., & Xu, Q. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00762c · Cited by 1,717
Sun, M.-H., Huang, S.-Z., Chen, L.-H., Li, Y., Yang, X.-Y., Yuan, Z.-Y., & Su, B.-L. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00135a · Cited by 1,454
Development of MOF-Derived Carbon-Based Nanomaterials for Efficient Catalysis
Shen, K., Chen, X., Chen, J., & Li, Y. (2016) · ACS Catalysis · doi:10.1021/acscatal.6b01222 · Cited by 1,334
Metal–organic frameworks for energy storage: Batteries and supercapacitors
Wang, L., Han, Y., Feng, X., Zhou, J., Qi, P., & Wang, B. (2016) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2015.09.002 · Cited by 1,298
Nanomaterials derived from metal–organic frameworks
Dang, S., Zhu, Q.-L., & Xu, Q. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.75 · Cited by 1,230
Metadata
- Authors
- Xu, G., Ding, B., Shen, L., Nie, P., Han, J., & Zhang, X.
- Venue
- Journal of Materials Chemistry A
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 1
- Issue
- 14
- Pages
- 4490
- ISSN
- 2050-7488 (ISSN-L)
- 2050-7496
- OpenAlex
- W2037429215
- Cited by
- 284
- References
- 40
- FWCI
- 21.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.