Progress in bio-based plastics and plasticizing modifications
Open accessThe DOI matches its Crossref record; 212 of the 212 references it cites were found in a registry or an index.
Abstract
Over the coming few decades bioplastic materials are expected to complement and gradually replace some of the fossil oil based materials. Multidisciplinary research efforts have generated a significant level of technical and commercial success towards these bio-based materials. However, extensive application of these bio-based plastics is still challenged by one or more of their possible inherent limitations, such as poor processability, brittleness, hydrophilicity, poor moisture and gas barrier, inferior compatibility, poor electrical, thermal and physical properties. The incorporation of additives such as plasticizers into the biopolymers is a common practice to improve these inherent limitations. Generally, plasticizers are added to both synthetic and bio-based polymeric materials to impart flexibility, improve toughness, and lower the glass transition temperature. This review introduces the most common bio-based plastics and provides an overview of recent advances in the selection and use of plasticizers, and their effect on the performance of these materials. In addition to plasticizers, we also present a perspective of other emerging techniques of improving the overall performance of bio-based plastics. Although a wide variety of bio-based plastics are under development, this review focuses on plasticizers utilized for the most extensively studied bioplastics including poly(lactic acid), polyhydroxyalkanoates, thermoplastic starch, proteinaceous plastics and cellulose acetates. The ongoing challenge and future potentials of plasticizers for bio-based plastics are also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures
















Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Introduction to Physical Polymer Science
Sperling, L. H. (2005) · doi:10.1002/0471757128 · Cited by 2,917
Occurrence, metabolism, metabolic role, and industrial uses of bacterial polyhydroxyalkanoates
Anderson, A. J., & DAWES, E. A. (1990) · Microbiological Reviews · doi:10.1128/mmbr.54.4.450-472.1990 · Cited by 2,912
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Polymer blends and composites from renewable resources
Yu, L., Dean, K., & Li, L. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.03.002 · Cited by 2,107
Natural-based plasticizers and biopolymer films: A review
Vieira, M. G. A., da Silva, M. A., dos Santos, L. O., & Beppu, M. M. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2010.12.011 · Cited by 1,992
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Ionic Liquids and Their Interaction with Cellulose
Pinkert, A., Marsh, K. N., Pang, S., & Staiger, M. P. (2009) · Chemical Reviews · doi:10.1021/cr9001947 · Cited by 1,508
The application of polyhydroxyalkanoates as tissue engineering materials
Chen, G.-Q., & Wu, Q. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.04.036 · Cited by 1,418
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
Poly(lactic acid) fiber: An overview
Gupta, B., Revagade, N., & Hilborn, J. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.01.005 · Cited by 1,360
Grafting: a versatile means to modify polymersTechniques, factors and applications
BHATTACHARYA, A. (2004) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2004.05.002 · Cited by 1,230
Cheetham, N. W. H., & Tao, L. (1998) · Carbohydrate Polymers · doi:10.1016/s0144-8617(98)00007-1 · Cited by 1,095
Biobased plastics and bionanocomposites: Current status and future opportunities
Reddy, M. M., Vivekanandhan, S., Misra, M., Bhatia, S. K., & Mohanty, A. K. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.006 · Cited by 1,080
Advances in cellulose ester performance and application
Edgar, K. J., Buchanan, C. M., Debenham, J. S., Rundquist, P. A., Seiler, B. D., Shelton, M. C., & Tindall, D. (2001) · Progress in Polymer Science · doi:10.1016/s0079-6700(01)00027-2 · Cited by 1,076
Cellulose modification by polymer grafting: a review
Roy, D., Semsarilar, M., Guthrie, J. T., & Perrier, S. (2009) · Chemical Society Reviews · doi:10.1039/b808639g · Cited by 1,061
New emerging trends in synthetic biodegradable polymers—Polylactide: A critique
Gupta, A. P., & Kumar, V. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.06.045 · Cited by 941
RAHMAN, M., & BRAZEL, C. (2004) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2004.10.001 · Cited by 883
Halden, R. U. (2010) · Annual Review of Public Health · doi:10.1146/annurev.publhealth.012809.103714 · Cited by 862
Edible Films and Coatings for Food Applications
(2009) · Springer eBooks · doi:10.1007/978-0-387-92824-1 · Cited by 781
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Application of ionic liquids as solvents for polymerization processes
Kubisa, P. (2004) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2003.10.002 · Cited by 609
The Chemomechanical Properties of Microbial Polyhydroxyalkanoates
Laycock, B., Halley, P., Pratt, S., Werker, A., & Lant, P. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.06.003 · Cited by 604
Starch-based nano-biocomposites
Xie, F., Pollet, E., Halley, P. J., & Avérous, L. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.002 · Cited by 550
Plasticizing polylactide—the effect of different plasticizers on the mechanical properties
Jacobsen, S., & Fritz, H. G. (1999) · Polymer Engineering & Science · doi:10.1002/pen.11517 · Cited by 540
Casein-based formulations as promising controlled release drug delivery systems
Elzoghby, A. O., Abo El-Fotoh, W. S., & Elgindy, N. A. (2011) · Journal of Controlled Release · doi:10.1016/j.jconrel.2011.02.010 · Cited by 519
Thermoplastic Processing of Proteins for Film Formation—A Review
Hernandez‐Izquierdo, V. M., & Krochta, J. M. (2008) · Journal of Food Science · doi:10.1111/j.1750-3841.2007.00636.x · Cited by 486
Citrate esters as plasticizers for poly(lactic acid)
Labrecque, L. V., Kumar, R. A., Dav�, V., Gross, R. A., & McCarthy, S. P. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19971121)66:8<1507::aid-app11>3.0.co;2-0 · Cited by 466
Suriyamongkol, P., Weselake, R., Narine, S., Moloney, M., & Shah, S. (2007) · Biotechnology Advances · doi:10.1016/j.biotechadv.2006.11.007 · Cited by 458
Thermal, mechanical and morphological characterization of plasticized PLA–PHB blends
Abdelwahab, M. A., Flynn, A., Chiou, B.-S., Imam, S., Orts, W., & Chiellini, E. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.05.036 · Cited by 454
Talja, R. A., Helén, H., Roos, Y. H., & Jouppila, K. (2007) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2006.05.019 · Cited by 444
Plasticizer effect on mechanical properties of β-lactoglobulin films
Sothornvit, R., & Krochta, J. M. (2001) · Journal of Food Engineering · doi:10.1016/s0260-8774(00)00237-5 · Cited by 434
The effects of plasticizers on the dynamic mechanical and thermal properties of poly(lactic acid)
Ljungberg, N., & Wesslén, B. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.11077 · Cited by 423
Present and future development in plastics from biomass
Shen, L., Worrell, E., & Patel, M. (2010) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.189 · Cited by 409
Production of polyhydroxyalkanoates by mixed culture: recent trends and biotechnological importance
Salehizadeh, H., & Van Loosdrecht, M. C. M. (2004) · Biotechnology Advances · doi:10.1016/j.biotechadv.2003.09.003 · Cited by 403
Extrusion Processing and Properties of Protein‐Based Thermoplastics
Verbeek, C. J. R., & van den Berg, L. E. (2010) · Macromolecular Materials and Engineering · doi:10.1002/mame.200900167 · Cited by 378
Effects of various plasticizers on mechanical and water vapor barrier properties of gelatin films
Cao, N., Yang, X., & Fu, Y. (2009) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2008.07.017 · Cited by 367
Effect of Plasticizers on Mechanical and Barrier Properties of Rice Starch Film
Laohakunjit, N., & Noomhorm, A. (2004) · Starch - Stärke · doi:10.1002/star.200300249 · Cited by 359
Wihodo, M., & Moraru, C. I. (2013) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2012.08.021 · Cited by 350
Mechanical and Barrier Properties of Egg Albumen Films
GENNADIOS, A., WELLER, C. L., HANNA, M. A., & FRONING, G. W. (1996) · Journal of Food Science · doi:10.1111/j.1365-2621.1996.tb13164.x · Cited by 347
Forssell, P. M., Mikkilä, J. M., Moates, G. K., & Parker, R. (1997) · Carbohydrate Polymers · doi:10.1016/s0144-8617(97)00133-1 · Cited by 345
Ghebremeskel, A. N., Vemavarapu, C., & Lodaya, M. (2007) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2006.08.010 · Cited by 328
A novel deep eutectic solvent-based ionic liquid used as electrolyte for dye-sensitized solar cells
Jhong, H.-R., Wong, D. S.-H., Wan, C.-C., Wang, Y.-Y., & Wei, T.-C. (2009) · Electrochemistry Communications · doi:10.1016/j.elecom.2008.11.001 · Cited by 317
Mechanical and water vapour barrier properties of edible gellan films
Yang, L., & Paulson, A. T. (2000) · Food Research International · doi:10.1016/s0963-9969(00)00092-2 · Cited by 312
Miscibility and biodegradability of blends of poly(lactic acid) and poly(vinyl acetate)
Gajria, A. M., Davé, V., Gross, R. A., & P. McCarthy, S. (1996) · Polymer · doi:10.1016/0032-3861(96)82913-2 · Cited by 306
The Effects of Citric Acid on the Properties of Thermoplastic Starch Plasticized by Glycerol
Jiugao, Y., Ning, W., & Xiaofei, M. (2005) · Starch - Stärke · doi:10.1002/star.200500423 · Cited by 302
Whey Protein Emulsion Film Performance as Affected by Lipid Type and Amount
SHELLHAMMER, T. H., & KROCHTA, J. M. (1997) · Journal of Food Science · doi:10.1111/j.1365-2621.1997.tb04008.x · Cited by 295
Miscibility, crystallization and melting of poly(3-hydroxybutyrate)/ poly(l-lactide) blends
Blümm, E., & Owen, A. J. (1995) · Polymer · doi:10.1016/0032-3861(95)90987-d · Cited by 289
Ren, J., Fu, H., Ren, T., & Yuan, W. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.01.024 · Cited by 279
Ljungberg, N., & Wesslén, B. (2003) · Polymer · doi:10.1016/j.polymer.2003.09.055 · Cited by 278
Wu, W. U., Hettiarachchy, N. S., & Qi, M. (1998) · Journal of the American Oil Chemists' Society · doi:10.1007/s11746-998-0235-0 · Cited by 271
Polylactic Acid: Synthesis, Properties and Applications
Avérous, L. (2008) · Monomers, Polymers and Composites from Renewable Resources · doi:10.1016/b978-0-08-045316-3.00021-1 · Cited by 258
Hassouna, F., Raquez, J.-M., Addiego, F., Dubois, P., Toniazzo, V., & Ruch, D. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.08.001 · Cited by 257
Biodegradable Soy-Based Plastics: Opportunities and Challenges
Swain, S. N., Biswal, S. M., Nanda, P. K., & Nayak, P. L. (2004) · Journal of Polymers and the Environment · doi:10.1023/b:jooe.0000003126.14448.04 · Cited by 240
Peptide-Polymer Conjugates: From Fundamental Science to Application
Shu, J. Y., Panganiban, B., & Xu, T. (2013) · Annual Review of Physical Chemistry · doi:10.1146/annurev-physchem-040412-110108 · Cited by 238
Effect of biodegradable plasticizers on thermal and mechanical properties of poly(3-hydroxybutyrate)
Choi, J. S., & Park, W. H. (2004) · Polymer Testing · doi:10.1016/j.polymertesting.2003.09.005 · Cited by 237
How well can renewable resources mimic commodity monomers and polymers?
Mathers, R. T. (2012) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.24939 · Cited by 237
Effects of plasticizers on thermal properties and heat sealability of sago starch films
Abdorreza, M. N., Cheng, L. H., & Karim, A. A. (2011) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2010.05.005 · Cited by 236
Rheological and thermal properties of thermoplastic starch with high glycerol content
Rodriguez-Gonzalez, F. J., Ramsay, B. A., & Favis, B. D. (2004) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2004.06.002 · Cited by 232
Edible Packaging Films Based on Fish Myofibrillar Proteins: Formulation and Functional Properties
CUQ, B., AYMARD, C., CUQ, J., & GUILBERT, S. (1995) · Journal of Food Science · doi:10.1111/j.1365-2621.1995.tb04593.x · Cited by 229
Ma, P., Hristova-Bogaerds, D. G., Goossens, J. G. P., Spoelstra, A. B., Zhang, Y., & Lemstra, P. J. (2012) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.10.015 · Cited by 223
Physical properties of tapioca-starch edible films: Influence of filmmaking and potassium sorbate
Flores, S., Famá, L., Rojas, A. M., Goyanes, S., & Gerschenson, L. (2007) · Food Research International · doi:10.1016/j.foodres.2006.02.004 · Cited by 220
Pommet, M., Redl, A., Guilbert, S., & Morel, M.-H. (2005) · Journal of Cereal Science · doi:10.1016/j.jcs.2005.02.005 · Cited by 219
IMMERGUT, E. H., & MARK, H. F. (1965) · Advances in Chemistry · doi:10.1021/ba-1965-0048.ch001 · Cited by 210
Polymers for Biomedical Applications: Improvement of the Interface Compatibility
Klee, D., & Höcker, H. (2007) · Advances in Polymer Science · doi:10.1007/3-540-48838-3_1 · Cited by 200
Emerging synthetic approaches for protein–polymer conjugations
Broyer, R. M., Grover, G. N., & Maynard, H. D. (2011) · Chemical Communications · doi:10.1039/c0cc04062b · Cited by 199
Crystallization and Microstructure of Poly(l-lactide-co-meso-lactide) Copolymers
Huang, J., Lisowski, M. S., Runt, J., Hall, E. S., Kean, R. T., Buehler, N., & Lin, J. S. (1998) · Macromolecules · doi:10.1021/ma9714629 · Cited by 187
Optical activity of polypeptides and proteins
Madison, V., & Schellman, J. (1972) · Biopolymers · doi:10.1002/bip.1972.360110509 · Cited by 186
Ma, P., Hristova‐Bogaerds, D. G., Lemstra, P. J., Zhang, Y., & Wang, S. (2012) · Macromolecular Materials and Engineering · doi:10.1002/mame.201100224 · Cited by 183
Wang, N., Zhang, X., Han, N., & Bai, S. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2008.09.021 · Cited by 181
Marquié, C. (2001) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf0101152 · Cited by 175
Plasticizers for Zein: Their Effect on Tensile Properties and Water Absorption of Zein Films
Lawton, J. W. (2004) · Cereal Chemistry · doi:10.1094/cchem.2004.81.1.1 · Cited by 174
Orliac, O., Rouilly, A., Silvestre, F., & Rigal, L. (2003) · Industrial Crops and Products · doi:10.1016/s0926-6690(03)00015-3 · Cited by 172
Study of wheat gluten plasticization with fatty acids
Pommet, M., Redl, A., Morel, M.-H., & Guilbert, S. (2003) · Polymer · doi:10.1016/s0032-3861(02)00746-2 · Cited by 171
de Graaf, R. A., Karman, A. P., & Janssen, L. P. B. M. (2003) · Starch - Stärke · doi:10.1002/star.200390020 · Cited by 170
Park, S. J., Kim, T. W., Kim, M. K., Lee, S. Y., & Lim, S.-C. (2012) · Biotechnology Advances · doi:10.1016/j.biotechadv.2011.11.007 · Cited by 169
Preparation and properties of absorbable fibres from l-lactide copolymers
Penning, J. P., Dijkstra, H., & Pennings, A. J. (1993) · Polymer · doi:10.1016/0032-3861(93)90212-s · Cited by 168
(2008) · Elsevier eBooks · doi:10.1016/b978-0-08-045371-2.x5001-x · Cited by 167
Yan, C., Zhang, J., Lv, Y., Yu, J., Wu, J., Zhang, J., & He, J. (2009) · Biomacromolecules · doi:10.1021/bm900447u · Cited by 166
Thermal degradation of poly(3-hydroxybutyrate) plasticized with acetyl tributyl citrate
Erceg, M., Kovačić, T., & Klarić, I. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.04.048 · Cited by 165
Mohanty, A. K., Wibowo, A., Misra, M., & Drzal, L. T. (2003) · Polymer Engineering & Science · doi:10.1002/pen.10097 · Cited by 162
Russell, P. L. (1987) · Journal of Cereal Science · doi:10.1016/s0733-5210(87)80050-4 · Cited by 160
Starch-Based Biodegradable Materials Suitable for Thermoforming Packaging
Averous, L., Fringant, C., & Moro, L. (2001) · Starch - Stärke · doi:10.1002/1521-379x(200108)53:8<368::aid-star368>3.0.co;2-w · Cited by 158
Avérous, L., & Fringant, C. (2001) · Polymer Engineering & Science · doi:10.1002/pen.10768 · Cited by 158
Mechanical and rheological properties of epoxidized soybean oil plasticized poly(lactic acid)
Xu, Y., & Qu, J. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.29797 · Cited by 157
Dynamic mechanical and thermal properties of plasticized poly(lactic acid)
Ren, Z., Dong, L., & Yang, Y. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.23549 · Cited by 156
Talja, R. A., Helén, H., Roos, Y. H., et al. (2007) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.037 · Cited by 156
Biodegradable packages development from starch based heat sealable films
López, O. V., Lecot, C. J., Zaritzky, N., et al. (2011) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2011.02.029 · Cited by 155
PHA bioplastic: A value‐added coproduct for biomass biorefineries
Snell, K. D., & Peoples, O. P. (2009) · Biofuels Bioproducts and Biorefining · doi:10.1002/bbb.161 · Cited by 153
Thermoplastic starch plasticized by an ionic liquid
Sankri, A., Arhaliass, A., Dez, I., Gaumont, A. ‐., Grohens, Y., Lourdin, D., Pillin, I., Rolland‐Sabaté, A., & Leroy, E. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.04.032 · Cited by 152
Yan, Q., Hou, H., Guo, P., & Dong, H. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.08.048 · Cited by 152
Properties of fatty‐acid esters of starch
Sagar, A. D., & Merrill, E. W. (1995) · Journal of Applied Polymer Science · doi:10.1002/app.1995.070580927 · Cited by 150
Controlled grafting of cellulose fibres – an outlook beyond paper and cardboard
Malmström, E., & Carlmark, A. (2011) · Polymer Chemistry · doi:10.1039/c1py00445j · Cited by 149
Hassouna, F., Raquez, J., Addiego, F., Toniazzo, V., Dúbois, P., & Ruch, D. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.12.001 · Cited by 144
Extrudates of Cornstarch with Urea and Glycols: Structure/Mechanical Property Relations
Shogren, R. L., Swanson, C. L., & Thompson, A. R. (1992) · Starch - Stärke · doi:10.1002/star.19920440905 · Cited by 141
Smart poly(2-hydroxyethyl methacrylate/itaconic acid) hydrogels for biomedical application
Tomić, S. L., Mićić, M. M., Dobić, S. N., Filipović, J. M., & Suljovrujić, E. H. (2009) · Radiation Physics and Chemistry · doi:10.1016/j.radphyschem.2009.11.015 · Cited by 140
Effect of Fatty Acids and Beeswax Addition on Properties of Sodium Caseinate Dispersions and Films
Fabra, M. J., Jiménez, A., Atarés, L., Talens, P., & Chiralt, A. (2009) · Biomacromolecules · doi:10.1021/bm900098p · Cited by 131
Bioplastics from Feather Quill
Ullah, A., Vasanthan, T., Bressler, D. C., Elias, A. L., & Wu, J. (2011) · Biomacromolecules · doi:10.1021/bm201112n · Cited by 129
Self-citationUrea and formamide as a mixed plasticizer for thermoplastic starch
Ma, X., Jiugao, Y., & Jin, F. (2004) · Polymer International · doi:10.1002/pi.1580 · Cited by 128
Glass transition temperature of starches with different amylose/amylopectin ratios
Liu, P., Yu, L. F., Wang, X., et al. (2010) · Journal of Cereal Science · doi:10.1016/j.jcs.2010.02.007 · Cited by 127
Ghebremeskel, A. N., Vemavarapu, C., & Lodaya, M. (2006) · Pharmaceutical Research · doi:10.1007/s11095-006-9034-1 · Cited by 127
Application of Chemical and Thermal Analysis Methods for Studying Cellulose Ester Plastics
Schilling, M. R., Bouchard, M., Khanjian, H. P., et al. (2010) · Accounts of Chemical Research · doi:10.1021/ar1000132 · Cited by 127
Compatibilized poly(-caprolactone)/poly(L-lactide) blends for biomedical uses
Maglio, G., Migliozzi, A., Palumbo, R., Immirzi, B., & Volpe, M. G. (1999) · Macromolecular Rapid Communications · doi:10.1002/(sici)1521-3927(19990401)20:4<236::aid-marc236>3.0.co;2-v · Cited by 124
Fenollar, O., Sanoguera, D. G., Sánchez‐Nacher, L., et al. (2009) · European Polymer Journal · doi:10.1016/j.eurpolymj.2009.05.029 · Cited by 119
Compatibilization of starch–zein melt processed blends by an ionic liquid used as plasticizer
Leroy, E., Jacquet, P., Coativy, G., Réguerre, A.-L., & Lourdin, D. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.04.044 · Cited by 118
1-Allyl-3-methylimidazolium chloride plasticized-corn starch as solid biopolymer electrolytes
Ning, W., Xingxiang, Z., Haihui, L., & He, B. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2008.11.005 · Cited by 116
Formamide as the plasticizer for thermoplastic starch
Ma, X., & Yu, J. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.20628 · Cited by 115
Peles, Z., & Zilberman, M. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.08.022 · Cited by 113
Maglio, G., Migliozzi, A., & Palumbo, R. (2003) · Polymer · doi:10.1016/s0032-3861(02)00764-4 · Cited by 111
Synergistic Effect of Oleic Acid and Glycerol on Zein Film Plasticization
Xu, H. N., Chai, Y., & Zhang, G. (2012) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf302940j · Cited by 111
Fabra, M. J., Talens, P., & Chiralt, A. (2009) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2009.11.004 · Cited by 110
Zugenmaier, P. (2004) · Macromolecular Symposia · doi:10.1002/masy.200450407 · Cited by 109
A Handbook of Applied Biopolymer Technology: Synthesis, Degradation and Applications
Sharma, S., & Mudhoo, A. (2011) · RSC green chemistry series · doi:10.1039/9781849733458 · Cited by 109
Ramesh, S., Shanti, R., & Morris, E. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.07.061 · Cited by 108
Tummala, P., Liu, W., Drzal, L. T., et al. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie060439l · Cited by 106
Characterization of zein modified with a mild cross-linking agent
Kim, S., Sessa, D. J., & Lawton, J. W. (2004) · Industrial Crops and Products · doi:10.1016/j.indcrop.2003.10.013 · Cited by 104
Preparation and characterisation of bioplastics made from cottonseed protein
Yue, H., Cui, Y., Shuttleworth, P. S., & Clark, J. H. (2012) · Green Chemistry · doi:10.1039/c2gc35509d · Cited by 104
Tian, H., Wang, Y., Zhang, L., Quan, C., & Zhang, X. (2010) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.02.009 · Cited by 103
Thermal properties and applications of low molecular weight polyhydroxybutyrate
Hong, S., Hsu, H., & Ye, M. (2012) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-012-2503-3 · Cited by 101
Solid-state plasticization of an acrylic polymer with chlorpheniramine maleate and triethyl citrate
Zhu, Y., Shah, N. H., Malick, A. W., et al. (2002) · International Journal of Pharmaceutics · doi:10.1016/s0378-5173(02)00244-2 · Cited by 98
Cellulose acetate butyrate and poly(hydroxybutyrate-co-valerate) copolymer blends
Buchanan, C. M., Gedon, S. C., White, A. W., & Wood, M. D. (1992) · Macromolecules · doi:10.1021/ma00052a046 · Cited by 97
Gil, N., Saska, M., & Negulescu, I. I. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.24132 · Cited by 96
Plasticization of soy protein polymer by polyol‐based plasticizers
Mo, X., & Sun, X. S. (2002) · Journal of the American Oil Chemists Society · doi:10.1007/s11746-002-0458-x · Cited by 93
Egg white-based bioplastics developed by thermomechanical processing
Jerez, A., Partal, P., Martínez, I., et al. (2007) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2007.03.020 · Cited by 92
Maglio, G., Malinconico, M., Migliozzi, A., & Groeninckx, G. (2004) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200300150 · Cited by 91
Surface photo-crosslinking of corn starch sheets
Zhou, J., Zhang, J., Ma, Y., & Tong, J. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2008.03.006 · Cited by 91
Effect of low molecular weight additives on enzymatic degradation of poly(3-hydroxybutyrate)
Yoshie, N., Nakasato, K., Fujiwara, M., Kasuya, K., Abe, H., Doi, Y., & Inoue, Y. (2000) · Polymer · doi:10.1016/s0032-3861(99)00547-9 · Cited by 89
Baltieri, R. C., Mei, L. H. I., & Bartoli, J. R. (2003) · Macromolecular Symposia · doi:10.1002/masy.200350704 · Cited by 89
Chaudhary, A., Miler, M., Torley, P. J., et al. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2008.05.017 · Cited by 88
Volkert, B., Lehmann, A., Greco, T., & Nejad, M. H. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.09.005 · Cited by 85
Poly(vinyl chloride) plasticized with succinate esters: synthesis and characterization
Stuart, A., McCallum, M. M., Fan, D., et al. (2010) · Polymer Bulletin · doi:10.1007/s00289-010-0271-4 · Cited by 85
Development of Proteinous Bioplastics Using Bloodmeal
Verbeek, C. J. R., & van den Berg, L. E. (2010) · Journal of Polymers and the Environment · doi:10.1007/s10924-010-0232-x · Cited by 83
Soybean-based biomaterials: preparation, properties and tissue regeneration potential
Santin, M., & Ambrosio, L. (2008) · Expert Review of Medical Devices · doi:10.1586/17434440.5.3.349 · Cited by 82
Srubar, W. V., Wright, Z. C., Tsui, A., Michel, A. T., Billington, S. L., & Frank, C. W. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.04.011 · Cited by 80
Characterization of Nano-Clay Reinforced Phytagel-Modified Soy Protein Concentrate Resin
Huang, X., & Netravali, A. N. (2006) · Biomacromolecules · doi:10.1021/bm060604g · Cited by 77
Sorption Isotherm and Plasticization Effect of Moisture and Plasticizers in Pea Starch Film
Zhang, Y., & Han, J. H. (2008) · Journal of Food Science · doi:10.1111/j.1750-3841.2008.00867.x · Cited by 77
Feather Fiber‐Based Thermoplastics: Effects of Different Plasticizers on Material Properties
Ullah, A., & Wu, J. (2012) · Macromolecular Materials and Engineering · doi:10.1002/mame.201200010 · Cited by 76
Chemical modification of zein by bifunctional polycaprolactone (PCL)
Wu, Q., Yoshino, T., Sakabe, H., Zhang, H., & Isobe, S. (2003) · Polymer · doi:10.1016/s0032-3861(03)00314-8 · Cited by 72
Snyders, R., Shingel, K. I., Zabeida, O., Roberge, C., Faure, M., Martinu, L., & Klemberg-Sapieha, J. E. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31217 · Cited by 72
Vaz, C. M., de Graaf, L. A., Reis, R. L., & Cunha, A. M. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(03)00063-6 · Cited by 72
Chaudhary, A., Torley, P. J., Halley, P. J., et al. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.07.023 · Cited by 71
Ramesh, S., Shanti, R., & Morris, E. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.11.037 · Cited by 69
Miao, L., Qiu, Z., Yang, W., et al. (2007) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2007.11.001 · Cited by 68
Biodegradable Polyesters from Renewable Resources
Tsui, A., Wright, Z. C., & Frank, C. W. (2013) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-061312-103323 · Cited by 68
A handbook of applied biopolymer technology : synthesis, degradation and applications
Sharma, S., & Mudhoo, A. (2011) · Cited by 67
Liu, Z., Yan, D., Men, H., Jiang, M., Tong, J., & Zhou, J. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.02.076 · Cited by 66
Thermal properties of corn gluten meal and its proteic components
Gioia, L. D., Cuq, B., & Guilbert, S. (1999) · International Journal of Biological Macromolecules · doi:10.1016/s0141-8130(99)00048-3 · Cited by 66
Zamudio‐Flores, P. B., Torres, A. V., Salgado-Delgado, R., & Bello‐Pérez, L. A. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.31047 · Cited by 65
Cao, X., Sun, S., Peng, X., Zhong, L., Sun, R., & Jiang, D. (2013) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf3055104 · Cited by 64
Joly, N., Granet, R., Branland, P., et al. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.21783 · Cited by 63
Teramoto, Y., & Nishio, Y. (2003) · Biomacromolecules · doi:10.1021/bm034453i · Cited by 59
Vidéki, B., Klébert, S., & Pukánszky, B. (2007) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21121 · Cited by 59
Morphology and properties of soy protein plastics modified with chitin
Zheng, H. R., Tan, Z., Zhan, Y. R., & Huang, J. T. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12997 · Cited by 57
Ductile polylactic acid prepared with ionic liquids
Chen, B., Wu, T., Chang, Y., et al. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.11.078 · Cited by 57
Effect of thermal degradation on rheological properties for poly(3-hydroxybutyrate)
Yamaguchi, M., & Arakawa, K. (2006) · European Polymer Journal · doi:10.1016/j.eurpolymj.2006.01.022 · Cited by 57
Preparation and properties of ethylenebisformamide plasticized potato starch (EPTPS)
Yang, J., Yu, J., & Ma, X. (2005) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2005.08.059 · Cited by 57
Thermoplastic films from peanut proteins extracted from peanut meal
Reddy, N., Chen, L., & Yang, Y. (2012) · Industrial Crops and Products · doi:10.1016/j.indcrop.2012.06.051 · Cited by 57
Ramesh, S., & Lu, S. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.07.055 · Cited by 56
Protein concentrate and adhesives from meat and bone meal
Park, S. K., Bae, D., & HETTIARACHCHY, N. S. (2000) · Journal of the American Oil Chemists Society · doi:10.1007/s11746-000-0191-5 · Cited by 55
Thermoplasticization of cellulose acetates by grafting of cyclic esters
Yoshioka, M., Hagiwara, N., & Shiraishi, N. (1999) · Cellulose · doi:10.1023/a:1009221730934 · Cited by 54
Nakamura, R., Netravali, A. N., Morgan, A. B., et al. (2012) · Fire and Materials · doi:10.1002/fam.2113 · Cited by 54
Homogeneous grafting poly (methyl methacrylate) on cellulose by atom transfer radical polymerization
Zhong, J., Chai, X., & Fu, S. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.07.037 · Cited by 53
Protein-based adhesives for particleboards—Effect of application process
Khosravi, S., Nordqvist, P., Khabbaz, F., et al. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2011.05.009 · Cited by 48
Quintana, R., Persenaire, O., Bonnaud, L., & Dúbois, P. (2011) · Polymer Chemistry · doi:10.1039/c1py00421b · Cited by 48
Molecular weight determination of hydrolyzed collagens
Denis, A., Brambati, N., Dessauvages, B., et al. (2007) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2007.05.016 · Cited by 47
Corrêa, M. C. S., Branciforti, M. C., Pollet, É., Agnelli, J. A. M., Nascente, P. A. P., & Avérous, L. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0379-0 · Cited by 46
Gaudio, C. D., Fioravanzo, L., Folin, M., Marchi, F., Ercolani, E., & Bianco, A. (2012) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.32756 · Cited by 45
Physical, Morphological, and Barrier Properties of Edible Casein Films with Wax Applications
Sohail, S. S., Wang, B., Biswas, M., et al. (2006) · Journal of Food Science · doi:10.1111/j.1750-3841.2006.00006.x · Cited by 44
Kurniawan, L., Qiao, G. G., & Zhang, X. (2007) · Biomacromolecules · doi:10.1021/bm0703719 · Cited by 44
Park, J. W., & Im, S. S. (2002) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.10240 · Cited by 44
Biermann, C. J., Chung, J. B., & Narayan, R. (1987) · Macromolecules · doi:10.1021/ma00171a010 · Cited by 43
Starch-based films. Preliminary diffusion evaluation
OTEY, F. H., & Westhoff, R. P. (1984) · Industrial & Engineering Chemistry Product Research and Development · doi:10.1021/i300014a023 · Cited by 43
Thermosetting Proteinaceous Plastics from Hydrolyzed Specified Risk Material
Mekonnen, T. H., Mussone, P. G., El‐Thaher, N., et al. (2013) · Macromolecular Materials and Engineering · doi:10.1002/mame.201200429 · Cited by 42
Self-citationTropini, V., Lens, J. P., Mulder, W., et al. (2004) · Industrial Crops and Products · doi:10.1016/j.indcrop.2003.10.012 · Cited by 42
Taghizadeh, A., & Favis, B. D. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.11.018 · Cited by 41
Ferritin–Polymer Conjugates: Grafting Chemistry and Integration into Nanoscale Assemblies
Hu, Y., Samanta, D., Parelkar, S. S., et al. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201000958 · Cited by 41
Compatibilization of polypropylene/ poly(3‐hydroxybutyrate) blends
Sadi, R. K., Kurusu, R. S., Fechine, G. J. M., et al. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.34853 · Cited by 36
Preparation and properties of starch acetate fibers for potential tissue engineering applications
Reddy, N., & Yang, Y. (2009) · Biotechnology and Bioengineering · doi:10.1002/bit.22331 · Cited by 36
Improvement of the deformative characteristics of poly-β-hydroxybutyrate by plasticization
Bibers, I., Tupureina, V., Dzene, A., et al. (1999) · Mechanics of Composite Materials · doi:10.1007/bf02259726 · Cited by 34
Graft polymerization of styrene on soy protein isolate
Dong-lei, X., Yang, C., Liu, X., et al. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.22278 · Cited by 34
Cellulose Chemistry: Novel Products and Synthesis Paths
Heinze, T. J., & Petzold, K. (2008) · Elsevier eBooks · doi:10.1016/b978-0-08-045316-3.00016-8 · Cited by 34
Plasticization mechanism and structure of polymers
Shtarkman, B. P., & Razinskaya, I. N. (1983) · Acta Polymerica · doi:10.1002/actp.1983.010340812 · Cited by 32
Reddy, N., Jin, E., Chen, L., et al. (2012) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf300695k · Cited by 31
Groote, P. D., Devaux, J., & Godard, P. (2002) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.10281 · Cited by 31
Wang, N., Zhang, L., & Gu, J. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.21237 · Cited by 30
Sadik, T., Massardier, V., Becquart, F., & Taha, M. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.37957 · Cited by 27
Criteria of efficiency of cellulose acetate plasticization
Fridman, O. A., & Sorokina, A. V. (2006) · Polymer Science Series B · doi:10.1134/s1560090406090028 · Cited by 26
Bianchi, E. (2000) · Carbohydrate Polymers · doi:10.1016/s0144-8617(99)00068-5 · Cited by 26
Substituent effect in anionic polymerization of β-lactones initiated by alkali metal alkoxides
Kurcok, P., Matuszowicz, A., Jedliński, Z., Kricheldorf, H. R., Dubois, P., & Jérôme, R. (1995) · Macromolecular Rapid Communications · doi:10.1002/marc.1995.030160709 · Cited by 26
Cross‐Linking of Wheat Gluten Using a Water‐Soluble Carbodiimide
Tropini, V., Lens, J. P., Mulder, W., et al. (2000) · Cereal Chemistry · doi:10.1094/cchem.2000.77.3.333 · Cited by 26
Physical Properties of Biodegradable Films of Soy Protein Concentrate/Gelling Agent Blends
Kim, J. T., & Netravali, A. N. (2011) · Macromolecular Materials and Engineering · doi:10.1002/mame.201100135 · Cited by 26
Processing and properties of soy protein/silica nanocomposites fabricated in situ synthesis
Tian, H. (2011) · Journal of Composite Materials · doi:10.1177/0021998311422954 · Cited by 25
Wavelength sensitivity of enhanced photodegradable polyethylenes, ECO, and LDPE/MX
Andrady, A. L., Pegram, J. E., & Searle, N. D. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19961128)62:9<1491::aid-app19>3.0.co;2-1 · Cited by 25
Amphiphilic Peptide–Polymer Conjugates with Side‐Conjugation
Dube, N., Presley, A. D., Shu, J. Y., & Xu, T. (2011) · Macromolecular Rapid Communications · doi:10.1002/marc.201000603 · Cited by 24
El‐Thaher, N., Mekonnen, T. H., Mussone, P. G., et al. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie303416h · Cited by 24
Self-citationRaphaelides, S. N., Dimitreli, G., Exarhopoulos, S., et al. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.08.041 · Cited by 22
Effect of sorbitan-based surfactants on glass transition temperature of cellulose esters
Amim, J., Blachechen, L. S., & Petri, D. F. S. (2011) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-011-1796-y · Cited by 22
Chemical modification of cellulose acetate by allylation and crosslinking with siloxane derivatives
Ştiubianu, G., Nicolescu, A. F., Nistor, A., Cazacu, M., Varganici, C., & Simionescu, B. C. (2012) · Polymer International · doi:10.1002/pi.4189 · Cited by 21
Seydibeyoğlu, M. Ö., Misra, M., & Mohanty, A. K. (2010) · International Journal of Plastics Technology · doi:10.1007/s12588-010-0005-3 · Cited by 21
Research works printed but not linked: 9
- McCoy, 1998, Chem. Eng. News, 76, 15
- Reddy, 2012, Chem. Eng. Prog., 108, 37
- Drumright, 2000, Adv. Biomater., 12, 1841
- Chen, 2005, Asbm6: Advanced Biomaterials Vi, 288–289, 437
- Bastioli, 2001, Starch/Staerke, 53, 351, 10.1002/1521-379X(200108)53:8<351::AID-STAR351>3.0.CO;2-R · DOI
- Yang, 2006, Chin. Chem. Lett., 17, 133
- Alissandratos, 2010, BMC Biotechnol., 10
- Ibragimo, 1973, Vysokomol. Soedin., Ser. A, 15, 1831
- Zepnik, 2012, J. Mater. Sci. Eng. A, 2, 152
Cited by
Biodegradation of bioplastics in natural environments
Emadian, S. M., Onay, T. T., & Demirel, B. (2017) · Waste Management · doi:10.1016/j.wasman.2016.10.006 · Cited by 1,168
PLA composites: From production to properties
Murariu, M., & Dubois, P. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.003 · Cited by 1,005
Environmental performance of bio-based and biodegradable plastics: the road ahead
Lambert, S., & Wagner, M. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00149e · Cited by 838
Naser, A. Z., Deiab, I., & Darras, B. M. (2021) · RSC Advances · doi:10.1039/d1ra02390j · Cited by 836
Guilherme, M. R., Aouada, F. A., Fajardo, A. R., Martins, A. F., Paulino, A. T., Davi, M. F. T., Rubira, A. F., & Muniz, E. C. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.04.017 · Cited by 764
Metadata
- Authors
- Mekonnen, T., Mussone, P., Khalil, H., & Bressler, D.
- Affiliations
- University of Alberta (CA)
- Corresponding author
- Bressler, David
- Venue
- Journal of Materials Chemistry A
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 1
- Issue
- 43
- Pages
- 13379
- ISSN
- 2050-7488 (ISSN-L)
- 2050-7496
- OpenAlex
- W2008894151
- Cited by
- 831
- References
- 212
- Citations by year
- 2026: 41 · 2025: 68 · 2024: 85 · 2023: 78 · 2022: 81 · 2021: 100 · 2020: 60 · 2019: 75 · 2018: 81 · 2017: 62 · 2016: 50 · 2015: 32 · 2014: 17 · 2013: 1
- FWCI
- 12.73
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by
- Locations
- Journal of Materials Chemistry A (publishedVersion, cc-by)
- Funders
- University of Alberta
- Alberta Livestock and Meat Agency
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Science and PVC
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Keywords
- bio-based plastics, plasticizers, bioplastics, polylactic acid, polyhydroxyalkanoates, thermoplastic starch, cellulose acetate, processability, flexibility, glass transition temperature, barrier properties, hydrophilicity
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.