The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
Inkjet deposition of liquid-exfoliated graphene and MoS2nanosheets for printed device applications
Abstract
Here we demonstrate inkjet printing of nanosheets of both graphene and MoS2 prepared by liquid exfoliation. We describe a protocol for the preparation of inks of nanosheets with well-defined size distribution and concentration up to 6 mg ml−1. Graphene traces were printed at low temperature (<70 °C) with no subsequent thermal or chemical treatment. Thin traces displayed percolation effects while traces with thickness above 160 nm displayed thickness-independent conductivity of 3000 S m−1. We also demonstrate the printing of semiconducting traces using solvent-exfoliated, size-selected MoS2 nanosheets. Such traces can be combined with inkjet-printed graphene interdigitated array electrodes to produce all-printed photodetectors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electronics and optoelectronics of two-dimensional transition metal dichalcogenides
Wang, Q. H., Kalantar-Zadeh, K., Kis, A., Coleman, J. N., & Strano, M. S. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.193 · Cited by 16,374
Self-citationRaman Spectrum of Graphene and Graphene Layers
Ferrari, A. C., Meyer, J. C., Scardaci, V., Casiraghi, C., Lazzeri, M., Mauri, F., Piscanec, S., Jiang, D., Novoselov, K. S., Roth, S., et al. (2006) · Physical Review Letters · doi:10.1103/physrevlett.97.187401 · Cited by 15,047
Graphene: Status and Prospects
Geim, A. K. (2009) · Science · doi:10.1126/science.1158877 · Cited by 13,942
The chemistry of two-dimensional layered transition metal dichalcogenide nanosheets
Chhowalla, M., Shin, H. S., Eda, G., Li, L.-J., Loh, K. P., & Zhang, H. (2013) · Nature Chemistry · doi:10.1038/nchem.1589 · Cited by 10,034
Novoselov, K. S., Fal′ko, V. I., Colombo, L., Gellert, P. R., Schwab, M. G., & Kim, K. (2012) · Nature · doi:10.1038/nature11458 · Cited by 9,251
Two-Dimensional Nanosheets Produced by Liquid Exfoliation of Layered Materials
Coleman, J. N., Lotya, M., O’Neill, A., Bergin, S. D., King, P. J., Khan, U., Young, K., Gaucher, A., De, S., Smith, R. J., et al. (2011) · Science · doi:10.1126/science.1194975 · Cited by 7,242
Self-citationIntroduction to Percolation Theory
Stauffer, D., Aharony, A., & Redner, S. (1993) · Physics Today · doi:10.1063/1.2808877 · Cited by 6,666
High-yield production of graphene by liquid-phase exfoliation of graphite
Hernandez, Y., Nicolosi, V., Lotya, M., Blighe, F. M., Sun, Z., De, S., McGovern, I. T., Holland, B., Byrne, M., Gun'Ko, Y. K., et al. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2008.215 · Cited by 6,285
Self-citationHuang, X., Qi, X., Boey, F., & Zhang, H. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15078b · Cited by 3,837
Liquid Exfoliation of Layered Materials
Nicolosi, V., Chhowalla, M., Kanatzidis, M. G., Strano, M. S., & Coleman, J. N. (2013) · Science · doi:10.1126/science.1226419 · Cited by 3,796
Self-citation
Cited by
2D materials and van der Waals heterostructures
Novoselov, K. S., Mishchenko, A., Carvalho, A., & Castro Neto, A. H. (2016) · Science · doi:10.1126/science.aac9439 · Cited by 7,434
Sensitive, High-Strain, High-Rate Bodily Motion Sensors Based on Graphene–Rubber Composites
Boland, C. S., Khan, U., Backes, C., O’Neill, A., McCauley, J., Duane, S., Shanker, R., Liu, Y., Jurewicz, I., Dalton, A. B., et al. (2014) · ACS Nano · doi:10.1021/nn503454h · Cited by 793
Self-citationRecent Progress in Materials and Devices toward Printable and Flexible Sensors
Rim, Y. S., Bae, S., Chen, H., De Marco, N., & Yang, Y. (2016) · Advanced Materials · doi:10.1002/adma.201505118 · Cited by 771
Water-based and biocompatible 2D crystal inks for all-inkjet-printed heterostructures
McManus, D., Vranic, S., Withers, F., Sanchez-Romaguera, V., Macucci, M., Yang, H., Sorrentino, R., Parvez, K., Son, S.-K., Iannaccone, G., et al. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2016.281 · Cited by 577
Functional inks and printing of two-dimensional materials
Hu, G., Kang, J., Ng, L. W. T., Zhu, X., Howe, R. C. T., Jones, C. G., Hersam, M. C., & Hasan, T. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00084k · Cited by 569
Inkjet printing wearable electronic devices
Gao, M., Li, L., & Song, Y. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc00038c · Cited by 535
Inorganic nanomaterials for printed electronics: a review
Wu, W. (2017) · Nanoscale · doi:10.1039/c7nr01604b · Cited by 522
Backes, C., Higgins, T. M., Kelly, A., Boland, C., Harvey, A., Hanlon, D., & Coleman, J. N. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b03335 · Cited by 516
Self-citationAll-printed thin-film transistors from networks of liquid-exfoliated nanosheets
Kelly, A. G., Hallam, T., Backes, C., Harvey, A., Esmaeily, A. S., Godwin, I., Coelho, J., Nicolosi, V., Lauth, J., Kulkarni, A., et al. (2017) · Science · doi:10.1126/science.aal4062 · Cited by 501
Self-citationProduction and processing of graphene and related materials
Backes, C., Abdelkader, A. M., Alonso, C., Andrieux-Ledier, A., Arenal, R., Azpeitia, J., Balakrishnan, N., Banszerus, L., Barjon, J., Bartali, R., et al. (2020) · 2D Materials · doi:10.1088/2053-1583/ab1e0a · Cited by 501
Self-citationLarge-Scale Production of Size-Controlled MoS2 Nanosheets by Shear Exfoliation
Varrla, E., Backes, C., Paton, K. R., Harvey, A., Gholamvand, Z., McCauley, J., & Coleman, J. N. (2015) · Chemistry of Materials · doi:10.1021/cm5044864 · Cited by 455
Self-citationAdvanced Materials for Printed Wearable Electrochemical Devices: A Review
Kim, J., Kumar, R., Bandodkar, A. J., & Wang, J. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201600260 · Cited by 452
2D‐Crystal‐Based Functional Inks
Bonaccorso, F., Bartolotta, A., Coleman, J. N., & Backes, C. (2016) · Advanced Materials · doi:10.1002/adma.201506410 · Cited by 446
Self-citationCarey, T., Cacovich, S., Divitini, G., Ren, J., Mansouri, A., Kim, J. M., Wang, C., Ducati, C., Sordan, R., & Torrisi, F. (2017) · Nature Communications · doi:10.1038/s41467-017-01210-2 · Cited by 433
Black phosphorus ink formulation for inkjet printing of optoelectronics and photonics
Hu, G., Albrow-Owen, T., Jin, X., Ali, A., Hu, Y., Howe, R. C. T., Shehzad, K., Yang, Z., Zhu, X., Woodward, R. I., et al. (2017) · Nature Communications · doi:10.1038/s41467-017-00358-1 · Cited by 400
2D Materials in Flexible Electronics: Recent Advances and Future Prospectives
Katiyar, A. K., Hoang, A. T., Xu, D., Hong, J., Kim, B. J., Ji, S., & Ahn, J.-H. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00302 · Cited by 363
Gravure Printing of Graphene for Large‐area Flexible Electronics
Secor, E. B., Lim, S., Zhang, H., Frisbie, C. D., Francis, L. F., & Hersam, M. C. (2014) · Advanced Materials · doi:10.1002/adma.201401052 · Cited by 358
Screen-Printing of a Highly Conductive Graphene Ink for Flexible Printed Electronics
He, P., Cao, J., Ding, H., Liu, C., Neilson, J., Li, Z., Kinloch, I. A., & Derby, B. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b04589 · Cited by 340
High Responsivity, Large-Area Graphene/MoS2 Flexible Photodetectors
De Fazio, D., Goykhman, I., Yoon, D., Bruna, M., Eiden, A., Milana, S., Sassi, U., Barbone, M., Dumcenco, D., Marinov, K., et al. (2016) · ACS Nano · doi:10.1021/acsnano.6b05109 · Cited by 339
Rapid and Versatile Photonic Annealing of Graphene Inks for Flexible Printed Electronics
Secor, E. B., Ahn, B. Y., Gao, T. Z., Lewis, J. A., & Hersam, M. C. (2015) · Advanced Materials · doi:10.1002/adma.201502866 · Cited by 334
Fabrication and Characteristics of Reduced Graphene Oxide Produced with Different Green Reductants
Xu, C., Shi, X., Ji, A., Shi, L., Zhou, C., & Cui, Y. (2015) · PLOS ONE · doi:10.1371/journal.pone.0144842 · Cited by 301
Turbulence-assisted shear exfoliation of graphene using household detergent and a kitchen blender
Varrla, E., Paton, K. R., Backes, C., Harvey, A., Smith, R. J., McCauley, J., & Coleman, J. N. (2014) · Nanoscale · doi:10.1039/c4nr03560g · Cited by 297
Self-citationInkjet Printing of Silver Nanowire Networks
Finn, D. J., Lotya, M., & Coleman, J. N. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01875 · Cited by 279
Self-citationShen, X., Zheng, Q., & Kim, J.-K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100708 · Cited by 264
Backes, C., Paton, K. R., Hanlon, D., Yuan, S., Katsnelson, M. I., Houston, J., Smith, R. J., McCloskey, D., Donegan, J. F., & Coleman, J. N. (2016) · Nanoscale · doi:10.1039/c5nr08047a · Cited by 262
Self-citationLi, J., Naiini, M. M., Vaziri, S., Lemme, M. C., & Östling, M. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400984 · Cited by 256
Metadata
- Authors
- Finn, D. J., Lotya, M., Cunningham, G., Smith, R. J., McCloskey, D., Donegan, J. F., & Coleman, J. N.
- Venue
- J. Mater. Chem. C
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014
- Volume
- 2
- Issue
- 5
- Pages
- 925-932
- ISSN
- 2050-7526 (ISSN-L)
- 2050-7534
- OpenAlex
- W1976926775
- Cited by
- 292
- References
- 59
- FWCI
- 12.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.