The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
Inkjet deposition of liquid-exfoliated graphene and MoS2nanosheets for printed device applications
Abstract
Here we demonstrate inkjet printing of nanosheets of both graphene and MoS2 prepared by liquid exfoliation. We describe a protocol for the preparation of inks of nanosheets with well-defined size distribution and concentration up to 6 mg ml−1. Graphene traces were printed at low temperature (<70 °C) with no subsequent thermal or chemical treatment. Thin traces displayed percolation effects while traces with thickness above 160 nm displayed thickness-independent conductivity of 3000 S m−1. We also demonstrate the printing of semiconducting traces using solvent-exfoliated, size-selected MoS2 nanosheets. Such traces can be combined with inkjet-printed graphene interdigitated array electrodes to produce all-printed photodetectors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electronics and optoelectronics of two-dimensional transition metal dichalcogenides
Wang, Q. H., Kalantar-Zadeh, K., Kis, A., Coleman, J. N., & Strano, M. S. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.193 · Cited by 16,374
Self-citationRaman Spectrum of Graphene and Graphene Layers
Ferrari, A. C., Meyer, J. C., Scardaci, V., Casiraghi, C., Lazzeri, M., Mauri, F., Piscanec, S., Jiang, D., Novoselov, K. S., Roth, S., et al. (2006) · Physical Review Letters · doi:10.1103/physrevlett.97.187401 · Cited by 15,047
Graphene: Status and Prospects
Geim, A. K. (2009) · Science · doi:10.1126/science.1158877 · Cited by 13,942
The chemistry of two-dimensional layered transition metal dichalcogenide nanosheets
Chhowalla, M., Shin, H. S., Eda, G., Li, L.-J., Loh, K. P., & Zhang, H. (2013) · Nature Chemistry · doi:10.1038/nchem.1589 · Cited by 10,034
Novoselov, K. S., Fal′ko, V. I., Colombo, L., Gellert, P. R., Schwab, M. G., & Kim, K. (2012) · Nature · doi:10.1038/nature11458 · Cited by 9,251
Two-Dimensional Nanosheets Produced by Liquid Exfoliation of Layered Materials
Coleman, J. N., Lotya, M., O’Neill, A., Bergin, S. D., King, P. J., Khan, U., Young, K., Gaucher, A., De, S., Smith, R. J., et al. (2011) · Science · doi:10.1126/science.1194975 · Cited by 7,242
Self-citationIntroduction to Percolation Theory
Stauffer, D., Aharony, A., & Redner, S. (1993) · Physics Today · doi:10.1063/1.2808877 · Cited by 6,666
High-yield production of graphene by liquid-phase exfoliation of graphite
Hernandez, Y., Nicolosi, V., Lotya, M., Blighe, F. M., Sun, Z., De, S., McGovern, I. T., Holland, B., Byrne, M., Gun'Ko, Y. K., et al. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2008.215 · Cited by 6,285
Self-citationHuang, X., Qi, X., Boey, F., & Zhang, H. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15078b · Cited by 3,837
Liquid Exfoliation of Layered Materials
Nicolosi, V., Chhowalla, M., Kanatzidis, M. G., Strano, M. S., & Coleman, J. N. (2013) · Science · doi:10.1126/science.1226419 · Cited by 3,796
Self-citationSingle-Layer MoS2Phototransistors
Yin, Z., Li, H., Li, H., Jiang, L., Shi, Y., Sun, Y., Lu, G., Zhang, Q., Chen, X., & Zhang, H. (2012) · ACS Nano · doi:10.1021/nn2024557 · Cited by 3,493
High-Resolution Inkjet Printing of All-Polymer Transistor Circuits
Sirringhaus, H., Kawase, T., Friend, R. H., Shimoda, T., Inbasekaran, M., Wu, W., & Woo, E. P. (2000) · Science · doi:10.1126/science.290.5499.2123 · Cited by 3,311
A high-mobility electron-transporting polymer for printed transistors
Yan, H., Chen, Z., Zheng, Y., Newman, C., Quinn, J. R., Dötz, F., Kastler, M., & Facchetti, A. (2009) · Nature · doi:10.1038/nature07727 · Cited by 3,009
Introduction to Percolation Theory
Blanc, R. (1986) · Contribution of Clusters Physics to Materials Science and Technology · doi:10.1007/978-94-009-4374-2_13 · Cited by 2,897
Graphene‐Based Materials: Synthesis, Characterization, Properties, and Applications
Huang, X., Yin, Z., Wu, S., Qi, X., He, Q., Zhang, Q., Yan, Q., Boey, F., & Zhang, H. (2011) · Small · doi:10.1002/smll.201002009 · Cited by 2,569
Liquid Phase Production of Graphene by Exfoliation of Graphite in Surfactant/Water Solutions
Lotya, M., Hernandez, Y., King, P. J., Smith, R. J., Nicolosi, V., Karlsson, L. S., Blighe, F. M., De, S., Wang, Z., McGovern, I. T., et al. (2009) · Journal of the American Chemical Society · doi:10.1021/ja807449u · Cited by 2,282
Self-citationMetal dichalcogenide nanosheets: preparation, properties and applications
Huang, X., Zeng, Z., & Zhang, H. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35387c · Cited by 2,030
Zhi, C., Bando, Y., Tang, C., Kuwahara, H., & Golberg, D. (2009) · Advanced Materials · doi:10.1002/adma.200900323 · Cited by 1,756
Influence of quantum confinement on the electronic structure of the transition metal sulfideTS2
Kuc, A., Zibouche, N., & Heine, T. (2011) · Physical Review B · doi:10.1103/physrevb.83.245213 · Cited by 1,753
Graphene-Based Liquid Crystal Device
Blake, P., Brimicombe, P. D., Nair, R. R., Booth, T. J., Jiang, D., Schedin, F., Ponomarenko, L. A., Morozov, S. V., Gleeson, H. F., Hill, E. W., et al. (2008) · Nano Letters · doi:10.1021/nl080649i · Cited by 1,554
Inkjet-Printed Graphene Electronics
Torrisi, F., Hasan, T., Wu, W., Sun, Z., Lombardo, A., Kulmala, T. S., Hsieh, G.-W., Jung, S., Bonaccorso, F., Paul, P. J., et al. (2012) · ACS Nano · doi:10.1021/nn2044609 · Cited by 1,195
Large‐Scale Exfoliation of Inorganic Layered Compounds in Aqueous Surfactant Solutions
Smith, R. J., King, P. J., Lotya, M., Wirtz, C., Khan, U., De, S., O'Neill, A., Duesberg, G. S., Grunlan, J. C., Moriarty, G., et al. (2011) · Advanced Materials · doi:10.1002/adma.201102584 · Cited by 1,161
Self-citationHigh‐Concentration Solvent Exfoliation of Graphene
Khan, U., O'Neill, A., Lotya, M., De, S., & Coleman, J. N. (2010) · Small · doi:10.1002/smll.200902066 · Cited by 1,010
Self-citationTurkevich, J. (1961) · Journal of the American Chemical Society · doi:10.1021/ja01480a053 · Cited by 974
Liquid Exfoliation of Defect-Free Graphene
Coleman, J. N. (2013) · Accounts of Chemical Research · doi:10.1021/ar300009f · Cited by 971
Self-citationAll‐Organic Vapor Sensor Using Inkjet‐Printed Reduced Graphene Oxide
Dua, V., Surwade, S. P., Ammu, S., Agnihotra, S. R., Jain, S., Roberts, K. E., Park, S., Ruoff, R. S., & Manohar, S. K. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200905089 · Cited by 932
A Mixed‐Solvent Strategy for Efficient Exfoliation of Inorganic Graphene Analogues
Zhou, K., Mao, N., Wang, H., Peng, Y., & Zhang, H. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201105364 · Cited by 929
Soluble, Exfoliated Hexagonal Boron Nitride Nanosheets
Lin, Y., Williams, T. V., & Connell, J. W. (2010) · The Journal of Physical Chemistry Letters · doi:10.1021/jz9002108 · Cited by 792
Solution Phase Production of Graphene with Controlled Thickness via Density Differentiation
Green, A. A., & Hersam, M. C. (2009) · Nano Letters · doi:10.1021/nl902200b · Cited by 755
Cunningham, G., Lotya, M., Cucinotta, C. S., Sanvito, S., Bergin, S. D., Menzel, R., Shaffer, M. S. P., & Coleman, J. N. (2012) · ACS Nano · doi:10.1021/nn300503e · Cited by 724
Self-citationInkjet Printing of High Conductivity, Flexible Graphene Patterns
Secor, E. B., Prabhumirashi, P. L., Puntambekar, K., Geier, M. L., & Hersam, M. C. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz400644c · Cited by 693
Inkjet printing of nanosized silver colloids
Lee, H.-H., Chou, K.-S., & Huang, K.-C. (2005) · Nanotechnology · doi:10.1088/0957-4484/16/10/074 · Cited by 586
Are There Fundamental Limitations on the Sheet Resistance and Transmittance of Thin Graphene Films?
De, S., & Coleman, J. N. (2010) · ACS Nano · doi:10.1021/nn100343f · Cited by 566
Self-citationPreparation of High Concentration Dispersions of Exfoliated MoS2 with Increased Flake Size
O’Neill, A., Khan, U., & Coleman, J. N. (2012) · Chemistry of Materials · doi:10.1021/cm301515z · Cited by 565
Self-citationLiquid‐Phase Exfoliation of Graphite Towards Solubilized Graphenes
Bourlinos, A. B., Georgakilas, V., Zboril, R., Steriotis, T. A., & Stubos, A. K. (2009) · Small · doi:10.1002/smll.200900242 · Cited by 558
High Photovoltaic Performance of Inkjet Printed Polymer:Fullerene Blends
Hoth, C. N., Choulis, S. A., Schilinsky, P., & Brabec, C. J. (2007) · Advanced Materials · doi:10.1002/adma.200700911 · Cited by 513
Efficient Inkjet Printing of Graphene
Li, J., Ye, F., Vaziri, S., Muhammed, M., Lemme, M. C., & Östling, M. (2013) · Advanced Materials · doi:10.1002/adma.201300361 · Cited by 505
Performance Limits of Monolayer Transition Metal Dichalcogenide Transistors
Liu, L., Kumar, S. B., Ouyang, Y., & Guo, J. (2011) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2011.2159221 · Cited by 502
Printing Highly Efficient Organic Solar Cells
Hoth, C. N., Schilinsky, P., Choulis, S. A., & Brabec, C. J. (2008) · Nano Letters · doi:10.1021/nl801365k · Cited by 459
Huang, L., Huang, Y., Liang, J., Wan, X., & Chen, Y. (2011) · Nano Research · doi:10.1007/s12274-011-0123-z · Cited by 458
Chen, P., Chen, H., Qiu, J., & Zhou, C. (2010) · Nano Research · doi:10.1007/s12274-010-0020-x · Cited by 435
Inkjet‐Printed Quantum Dot–Polymer Composites for Full‐Color AC‐Driven Displays
Wood, V., Panzer, M. J., Chen, J., Bradley, M. S., Halpert, J. E., Bawendi, M. G., & Bulović, V. (2009) · Advanced Materials · doi:10.1002/adma.200803256 · Cited by 422
Le, L. T., Ervin, M. H., Qiu, H., Fuchs, B. E., & Lee, W. Y. (2011) · Electrochemistry Communications · doi:10.1016/j.elecom.2011.01.023 · Cited by 420
Bourlinos, A. B., Georgakilas, V., Zboril, R., Steriotis, T. A., Stubos, A. K., & Trapalis, C. (2009) · Solid State Communications · doi:10.1016/j.ssc.2009.09.018 · Cited by 291
Hibino, H., Kageshima, H., Kotsugi, M., Maeda, F., Guo, F.-Z., & Watanabe, Y. (2009) · Physical Review B · doi:10.1103/physrevb.79.125437 · Cited by 278
Micropatterning of Graphene Sheets by Inkjet Printing and Its Wideband Dipole‐Antenna Application
Shin, K., Hong, J., & Jang, J. (2011) · Advanced Materials · doi:10.1002/adma.201100345 · Cited by 252
The effects of percolation in nanostructured transparent conductors
De, S., & Coleman, J. N. (2011) · MRS Bulletin · doi:10.1557/mrs.2011.236 · Cited by 249
Self-citationTemperature-Dependent Electrical Properties of Graphene Inkjet-Printed on Flexible Materials
Kong, D., Le, L. T., Li, Y., Zunino, J. L., & Lee, W. (2012) · Langmuir · doi:10.1021/la301775d · Cited by 233
May, P., Khan, U., Hughes, J. M., & Coleman, J. N. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp302365w · Cited by 217
Self-citationInkjet-printed graphene-PEDOT:PSS modified screen printed carbon electrode for biochemical sensing
Sriprachuabwong, C., Karuwan, C., Wisitsorrat, A., Phokharatkul, D., Lomas, T., Sritongkham, P., & Tuantranont, A. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm14005e · Cited by 190
May, P., Khan, U. N., Hughes, J. M., & Coleman, J. N. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp310100m · Cited by 154
Self-citationCarbon black supercapacitors employing thin electrodes
Kossyrev, P. A. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.10.106 · Cited by 153
Inkjet Printing of Transparent, Electrically Conducting Single‐Walled Carbon‐Nanotube Composites
Small, W. R., & Panhuis, M. I. H. (2007) · Small · doi:10.1002/smll.200700110 · Cited by 144
Flexible and transparent graphene films as acoustic actuator electrodes using inkjet printing
Shin, K., Hong, J., & Jang, J. (2011) · Chemical Communications · doi:10.1039/c1cc12913a · Cited by 143
Work Function and Photothreshold of Layered Metal Dichalcogenides
Shimada, T., Ohuchi, F. S., & Parkinson, B. A. (1994) · Japanese Journal of Applied Physics · doi:10.1143/jjap.33.2696 · Cited by 124
Lim, S.-J., Kang, B., Kwak, D., Lee, W. H., Lim, J. A., & Cho, K. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp203441e · Cited by 111
Percolation scaling in composites of exfoliated MoS2 filled with nanotubes and graphene
Cunningham, G., Lotya, M., McEvoy, N., Duesberg, G. S., van der Schoot, P., & Coleman, J. N. (2012) · Nanoscale · doi:10.1039/c2nr31782f · Cited by 84
Self-citationInkjet printed acrylic formulations based on UV-reduced graphene oxide nanocomposites
Giardi, R., Porro, S., Chiolerio, A., Celasco, E., & Sangermano, M. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6866-4 · Cited by 78
Zhang, H., Xie, A., Shen, Y., Qiu, L., & Tian, X. (2012) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp41561e · Cited by 75
Cited by
2D materials and van der Waals heterostructures
Novoselov, K. S., Mishchenko, A., Carvalho, A., & Castro Neto, A. H. (2016) · Science · doi:10.1126/science.aac9439 · Cited by 7,434
Sensitive, High-Strain, High-Rate Bodily Motion Sensors Based on Graphene–Rubber Composites
Boland, C. S., Khan, U., Backes, C., O’Neill, A., McCauley, J., Duane, S., Shanker, R., Liu, Y., Jurewicz, I., Dalton, A. B., et al. (2014) · ACS Nano · doi:10.1021/nn503454h · Cited by 793
Self-citationRecent Progress in Materials and Devices toward Printable and Flexible Sensors
Rim, Y. S., Bae, S., Chen, H., De Marco, N., & Yang, Y. (2016) · Advanced Materials · doi:10.1002/adma.201505118 · Cited by 771
Water-based and biocompatible 2D crystal inks for all-inkjet-printed heterostructures
McManus, D., Vranic, S., Withers, F., Sanchez-Romaguera, V., Macucci, M., Yang, H., Sorrentino, R., Parvez, K., Son, S.-K., Iannaccone, G., et al. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2016.281 · Cited by 577
Functional inks and printing of two-dimensional materials
Hu, G., Kang, J., Ng, L. W. T., Zhu, X., Howe, R. C. T., Jones, C. G., Hersam, M. C., & Hasan, T. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00084k · Cited by 569
Metadata
- Authors
- Finn, D. J., Lotya, M., Cunningham, G., Smith, R. J., McCloskey, D., Donegan, J. F., & Coleman, J. N.
- Venue
- J. Mater. Chem. C
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014
- Volume
- 2
- Issue
- 5
- Pages
- 925-932
- ISSN
- 2050-7526 (ISSN-L)
- 2050-7534
- OpenAlex
- W1976926775
- Cited by
- 292
- References
- 59
- FWCI
- 12.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.