CoChat

Life cycle assessment of polyols for polyurethane production using CO 2 as feedstock: insights from an industrial case study

Open access
von der Assen, Niklas, Bardow, André · 2014 · Green Chem.

The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.

Abstract

Life cycle assessment is used to determine impact reductions for greenhouse gas emission and fossil resource depletion for production of polyethercarbonate polyols using CO 2 from flue gases as feedstock.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1039/c4gc00513a

Cites

23 of 23 references verified0 citation errors · 0 not checkable

Statistics

Figures

Scheme 1 Polymerization of propylene oxide (PO) and carbon dioxide (CO2) to polyethercarbonate polyols using a DMC catalyst and a multifunctional alcohol ( e.g. glycerol) as starter. Adapted from ref. 7 and 8.
Scheme 1 Polymerization of propylene oxide (PO) and carbon dioxide (CO2) to polyethercarbonate polyols using a DMC catalyst and a multifunctional alcohol ( e.g. glycerol) as starter. Adapted from ref. 7 and 8.CC-BY · From the PDF
Fig. 1 (a) Product systems for CO2-based polyethercarbonate polyols. CO2 utilization (right box) comprises production of polyethercarbonate polyols and separation of the by-product cyclic propylene carbonate (cPC) as well as provision of all feedstocks and energy. Feedstock CO2 is provided by a lignite power plant with CO2 capture (CO2 source, top left box). Additional electricity from the grid mix compensates for the energy penalty of CO2 capture (electricity compensation, bottom left box). (b) Product system for conventional polyether polyols from fossil-based feedstocks. Polyol production (right box) comprises the production process itself as well as provision of all feedstocks and energy. Electricity generation (left box) from a lignite power plant without CO2 capture is added to the product system to enable a sound comparison to the CCU system (a) with identical product outputs (functional unit).
Fig. 1 (a) Product systems for CO2-based polyethercarbonate polyols. CO2 utilization (right box) comprises production of polyethercarbonate polyols and separation of the by-product cyclic propylene carbonate (cPC) as well as provision of all feedstocks and energy. Feedstock CO2 is provided by a lignite power plant with CO2 capture (CO2 source, top left box). Additional electricity from the grid mix compensates for the energy penalty of CO2 capture (electricity compensation, bottom left box). (b) Product system for conventional polyether polyols from fossil-based feedstocks. Polyol production (right box) comprises the production process itself as well as provision of all feedstocks and energy. Electricity generation (left box) from a lignite power plant without CO2 capture is added to the product system to enable a sound comparison to the CCU system (a) with identical product outputs (functional unit).CC-BY · From the PDF
Fig. 2 Global warming impacts in kg CO2-equivalents for product system of conventional polyether polyols (left) and CO2-based polyethercarbonate polyols (right, 20 wt% CO2 content). The CO2 source includes the lignite power plant, CO2 capture, CO2 compression and CO2 transport, if applicable. Utilities include DMC catalyst, steam, electricity, thin- fi lm evaporator and others; cf. Fig. 1. Major reductions of GHG emissions originate from CO2 capture ( -0.15 kg CO2-eq) and substitution of epoxides with CO2 ( -0.47 kg CO2-eq). Changes in the polyol process do not add signi fi cantly to overall GHG emissions (+0.08 kg CO2-eq).
Fig. 2 Global warming impacts in kg CO2-equivalents for product system of conventional polyether polyols (left) and CO2-based polyethercarbonate polyols (right, 20 wt% CO2 content). The CO2 source includes the lignite power plant, CO2 capture, CO2 compression and CO2 transport, if applicable. Utilities include DMC catalyst, steam, electricity, thin- fi lm evaporator and others; cf. Fig. 1. Major reductions of GHG emissions originate from CO2 capture ( -0.15 kg CO2-eq) and substitution of epoxides with CO2 ( -0.47 kg CO2-eq). Changes in the polyol process do not add signi fi cantly to overall GHG emissions (+0.08 kg CO2-eq).CC-BY · From the PDF
Fig. 3 Global warming impact reductions in kg CO2-equivalents per kg feedstock CO2 incorporated into polyols. Due to substitution of GHG emission intensive epoxides, the amount of avoided GHG emissions is higher than the amount of CO2 used as feedstock. For 30 wt% CO2, about three times as many CO2-eq emissions are avoided as CO2 is utilized as feedstock.
Fig. 3 Global warming impact reductions in kg CO2-equivalents per kg feedstock CO2 incorporated into polyols. Due to substitution of GHG emission intensive epoxides, the amount of avoided GHG emissions is higher than the amount of CO2 used as feedstock. For 30 wt% CO2, about three times as many CO2-eq emissions are avoided as CO2 is utilized as feedstock.CC-BY · From the PDF
Fig. 4 Fossil resource depletion in kg oil-equivalents for product system of conventional polyether polyols (left) and CO2-based polyethercarbonate polyols with 10, 20 and 30 wt% CO2 content (second left to right). The CO2 source includes the lignite power plant, CO2 capture, CO2 compression and CO2 transport, if applicable. Utilities include DMC catalyst, steam, electricity, thin- fi lm evaporator and others; cf. Fig. 1. Major reductions of fossil resource depletion originate from substitution of epoxides with CO2 ( -0.10, -0.31, and -0.47 kg oil-eq for 10, 20, and 30 wt% CO2 content, respectively). Additional impacts from the CO2 source, electricity compensation, and changes in the polyol process are small (between 0.03 and 0.04 kg oil-eq).
Fig. 4 Fossil resource depletion in kg oil-equivalents for product system of conventional polyether polyols (left) and CO2-based polyethercarbonate polyols with 10, 20 and 30 wt% CO2 content (second left to right). The CO2 source includes the lignite power plant, CO2 capture, CO2 compression and CO2 transport, if applicable. Utilities include DMC catalyst, steam, electricity, thin- fi lm evaporator and others; cf. Fig. 1. Major reductions of fossil resource depletion originate from substitution of epoxides with CO2 ( -0.10, -0.31, and -0.47 kg oil-eq for 10, 20, and 30 wt% CO2 content, respectively). Additional impacts from the CO2 source, electricity compensation, and changes in the polyol process are small (between 0.03 and 0.04 kg oil-eq).CC-BY · From the PDF
Fig. 5 Global warming impact considering alternative PO production technologies for product system of conventional polyether polyols (left bar for each PO technology) and CO2-based polyethercarbonate polyols with 20 wt% CO2 (right bar for each PO technology). Despite large variations between alternative PO production technologies, the global warming impact reduction for the CCU system varies only between 14 and 19%.
Fig. 5 Global warming impact considering alternative PO production technologies for product system of conventional polyether polyols (left bar for each PO technology) and CO2-based polyethercarbonate polyols with 20 wt% CO2 (right bar for each PO technology). Despite large variations between alternative PO production technologies, the global warming impact reduction for the CCU system varies only between 14 and 19%.CC-BY · From the PDF
Fig. 6 Product-speci fi c global warming impacts in kg CO2-equivalents per kg of polyols. For polyethercarbonate polyols, impacts were obtained by 100% allocation to polyols ( worst case allocation , second from left, GW(CO2,feed) = 0.2 kg CO2-eq kg -1 ) and by crediting an avoided burden for supply of grid electricity in the CCU system ( best case allocation , third from left, GW(CO2,feed) = -0.8 kg CO2-eq kg -1 ). An ideal CO 2 source is added to illustrate the theoretically minimal global warming impact for CO2 supply (GW(CO2,feed) = -1.0 kg CO2-eq kg -1 ).
Fig. 6 Product-speci fi c global warming impacts in kg CO2-equivalents per kg of polyols. For polyethercarbonate polyols, impacts were obtained by 100% allocation to polyols ( worst case allocation , second from left, GW(CO2,feed) = 0.2 kg CO2-eq kg -1 ) and by crediting an avoided burden for supply of grid electricity in the CCU system ( best case allocation , third from left, GW(CO2,feed) = -0.8 kg CO2-eq kg -1 ). An ideal CO 2 source is added to illustrate the theoretically minimal global warming impact for CO2 supply (GW(CO2,feed) = -1.0 kg CO2-eq kg -1 ).CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Research works printed but not linked: 6

  1. J. Langanke , A.Wolf and M.Peters , Polymers from CO2 – An Industrial Perspective , in Carbon Dioxide Utilization – Closing the Carbon Cycle , ed. P. Styring and A. Quadrelli , Elsevier , 2014 , in print
  2. M. Goedkoop , R.Heijungs , M.Huijbregts , A. D.Schryver , J.Struijs and R. V.Zelm , ReCiPe 2008, A life cycle impact assessment method which comprises harmonised category indicators at the midpoint and the endpoint level; First edition (version 1.08) Report I: Characterisation , 2013 , http://www.lcia-recipe.net
  3. RWE Power AG , Niederaussem Power Plant , 2014 , http://www.rwe.com/web/cms/en/60132/rwe-power-ag/locations/lignite/niederaussem-power-plant/
  4. European Industrial Gases Association (EIGA) , Carbon Dioxide Source Qualification Quality Standards And Verification, IGC Doc 70/08/E, Appendix A, Table 1 , 2008
  5. IHS Chemical , Process Economics Program (PEP) Yearbook , pp. 1089 (PO/SM Lyondell process), 1091 (PO/SM Shell process) and 1094 (HPPO BASF process), 2010 , http://www.ihs.com/products/chemical/technology/pep/
  6. Frischknecht, 2007, Int. J. Life Cycle Assess., Special (1), 7

Cited by

See all 399

Metadata

Authors
von der Assen, N., & Bardow, A.
Affiliations
  • Lehrstuhl für Technische Thermodynamik
  • RWTH Aachen University (DE)
Corresponding author
Bardow, André
Venue
Green Chem.
Published
2014
Volume
16
Issue
6
Pages
3272-3280
ISSN
  • 1463-9262 (ISSN-L)
  • 1463-9270
OpenAlex
W2148701093
Cited by
399
References
23
Citations by year
2026: 35 · 2025: 32 · 2024: 41 · 2023: 34 · 2022: 30 · 2021: 49 · 2020: 29 · 2019: 32 · 2018: 29 · 2017: 37 · 2016: 28 · 2015: 20 · 2014: 3
FWCI
22.53
Type
journal article
Language
en
Open access
Licence
cc-by
Locations
  • Green Chemistry (publishedVersion, cc-by)
  • RWTH Publications (RWTH Aachen) (submittedVersion, other-oa)
  • Repository for Publications and Research Data (ETH Zurich) (submittedVersion, cc-by)
  • ETH Zürich Research Collection (cc-by)
Funders
Bundesministerium für Bildung und Forschung (033RC1005B)
Topics
  • Physical Sciences › Environmental Science › Environmental Engineering › Environmental Impact and Sustainability
  • Physical Sciences › Environmental Science › Environmental Chemistry › Chemistry and Chemical Engineering
  • Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Carbon dioxide utilization in catalysis
Keywords
sugar alcohols, polyurethane, CO2 feedstock, flue gas CO2, greenhouse gas emissions, fossil resource depletion, industrial case study, CO2 capture

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.