The DOI matches its Crossref record; 216 of the 216 references it cites were found in a registry or an index.
Life and death of liquid-infused surfaces: a review on the choice, analysis and fate of the infused liquid layer
Abstract
We review the rational choice, the analysis, the depletion and the properties imparted by the liquid layer in liquid-infused surfaces – a new class of low-adhesion surface.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicity
Wong, T.-S., Kang, S. H., Tang, S. K. Y., Smythe, E. J., Hatton, B. D., Grinthal, A., & Aizenberg, J. (2011) · Nature · doi:10.1038/nature10447 · Cited by 4,134
Understanding organofluorine chemistry. An introduction to the C–F bond
O'Hagan, D. (2008) · Chem. Soc. Rev. · doi:10.1039/b711844a · Cited by 4,045
Interfacial Forces in Aqueous Media
van Oss, C. J. (2006) · CRC Press eBooks · doi:10.1201/9781420015768 · Cited by 1,915
Design of anti-icing surfaces: smooth, textured or slippery?
Kreder, M. J., Alvarenga, J., Kim, P., & Aizenberg, J. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2015.3 · Cited by 1,505
Liquid-Infused Nanostructured Surfaces with Extreme Anti-Ice and Anti-Frost Performance
Kim, P., Wong, T.-S., Alvarenga, J., Kreder, M. J., Adorno-Martinez, W. E., & Aizenberg, J. (2012) · ACS Nano · doi:10.1021/nn302310q · Cited by 1,316
Modern approaches to marine antifouling coatings
Chambers, L. D., Stokes, K. R., Walsh, F. C., & Wood, R. J. K. (2006) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2006.08.129 · Cited by 1,034
Droplet mobility on lubricant-impregnated surfaces
Smith, J. D., Dhiman, R., Anand, S., Reza-Garduno, E., Cohen, R. E., McKinley, G. H., & Varanasi, K. K. (2013) · Soft Matter · doi:10.1039/c2sm27032c · Cited by 994
Liquid-infused structured surfaces with exceptional anti-biofouling performance
Epstein, A. K., Wong, T.-S., Belisle, R. A., Boggs, E. M., & Aizenberg, J. (2012) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1201973109 · Cited by 928
Bohn, H. F., & Federle, W. (2004) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0405885101 · Cited by 781
A bioinspired omniphobic surface coating on medical devices prevents thrombosis and biofouling
Leslie, D. C., Waterhouse, A., Berthet, J. B., Valentin, T. M., Watters, A. L., Jain, A., Kim, P., Hatton, B. D., Nedder, A., Donovan, K., et al. (2014) · Nature Biotechnology · doi:10.1038/nbt.3020 · Cited by 758
Self-citationDewetting Patterns and Molecular Forces: A Reconciliation
Seemann, R., Herminghaus, S., & Jacobs, K. (2001) · Physical Review Letters · doi:10.1103/physrevlett.86.5534 · Cited by 684
Enhanced Condensation on Lubricant-Impregnated Nanotextured Surfaces
Anand, S., Paxson, A. T., Dhiman, R., Smith, J. D., & Varanasi, K. K. (2012) · ACS Nano · doi:10.1021/nn303867y · Cited by 630
Adaptive fluid-infused porous films with tunable transparency and wettability
Yao, X., Hu, Y., Grinthal, A., Wong, T.-S., Mahadevan, L., & Aizenberg, J. (2013) · Nature Materials · doi:10.1038/nmat3598 · Cited by 553
Hydrophilic directional slippery rough surfaces for water harvesting
Dai, X., Sun, N., Nielsen, S. O., Stogin, B. B., Wang, J., Yang, S., & Wong, T.-S. (2018) · Science Advances · doi:10.1126/sciadv.aaq0919 · Cited by 553
Preventing mussel adhesion using lubricant-infused materials
Amini, S., Kolle, S., Petrone, L., Ahanotu, O., Sunny, S., Sutanto, C. N., Hoon, S., Cohen, L., Weaver, J. C., Aizenberg, J., et al. (2017) · Science · doi:10.1126/science.aai8977 · Cited by 534
Slippery pre-suffused surfaces
Lafuma, A., & Quéré, D. (2011) · EPL (Europhysics Letters) · doi:10.1209/0295-5075/96/56001 · Cited by 530
Kim, P., Kreder, M. J., Alvarenga, J., & Aizenberg, J. (2013) · Nano Letters · doi:10.1021/nl4003969 · Cited by 520
Covalently Attached Liquids: Instant Omniphobic Surfaces with Unprecedented Repellency
Wang, L., & McCarthy, T. J. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201509385 · Cited by 459
Liquid-Infused Surfaces: A Review of Theory, Design, and Applications
Villegas, M., Zhang, Y., Abu Jarad, N., Soleymani, L., & Didar, T. F. (2019) · ACS Nano · doi:10.1021/acsnano.9b04129 · Cited by 459
Vogel, N., Belisle, R. A., Hatton, B., Wong, T.-S., & Aizenberg, J. (2013) · Nature Communications · doi:10.1038/ncomms3176 · Cited by 439
Direct observation of drops on slippery lubricant-infused surfaces
Schellenberger, F., Xie, J., Encinas, N., Hardy, A., Klapper, M., Papadopoulos, P., Butt, H.-J., & Vollmer, D. (2015) · Soft Matter · doi:10.1039/c5sm01809a · Cited by 402
Mechanism of Frost Formation on Lubricant-Impregnated Surfaces
Rykaczewski, K., Anand, S., Subramanyam, S. B., & Varanasi, K. K. (2013) · Langmuir · doi:10.1021/la400801s · Cited by 376
2D nanomaterials as lubricant additive: A review
Xiao, H., & Liu, S. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.09.029 · Cited by 368
Liu, L., Zhou, M. J., Jin, L., Li, L., Mo, Y., Su, G., Li, X., Zhu, H., & Tian, Y. (2019) · Friction · doi:10.1007/s40544-019-0268-4 · Cited by 365
Usach, I., Martinez, R., Festini, T., & Peris, J.-E. (2019) · Advances in Therapy · doi:10.1007/s12325-019-01101-6 · Cited by 358
Oleoplaning droplets on lubricated surfaces
Daniel, D., Timonen, J. V. I., Li, R., Velling, S. J., & Aizenberg, J. (2017) · Nature Physics · doi:10.1038/nphys4177 · Cited by 344
Inhibition of ice nucleation by slippery liquid-infused porous surfaces (SLIPS)
Wilson, P. W., Lu, W., Xu, H., Kim, P., Kreder, M. J., Alvarenga, J., & Aizenberg, J. (2013) · Phys. Chem. Chem. Phys. · doi:10.1039/c2cp43586a · Cited by 341
Ice Adhesion on Lubricant-Impregnated Textured Surfaces
Subramanyam, S. B., Rykaczewski, K., & Varanasi, K. K. (2013) · Langmuir · doi:10.1021/la402456c · Cited by 339
Perfluorocarbon‐Based Oxygen Carriers: Review of Products and Trials
Castro, C. I., & Briceno, J. C. (2010) · Artificial Organs · doi:10.1111/j.1525-1594.2009.00944.x · Cited by 334
Multifunctional ferrofluid-infused surfaces with reconfigurable multiscale topography
Wang, W., Timonen, J. V. I., Carlson, A., Drotlef, D.-M., Zhang, C. T., Kolle, S., Grinthal, A., Wong, T.-S., Hatton, B., Kang, S. H., et al. (2018) · Nature · doi:10.1038/s41586-018-0250-8 · Cited by 322
Designing Liquid‐Infused Surfaces for Medical Applications: A Review
Howell, C., Grinthal, A., Sunny, S., Aizenberg, M., & Aizenberg, J. (2018) · Advanced Materials · doi:10.1002/adma.201802724 · Cited by 318
Drag Reduction using Lubricant-Impregnated Surfaces in Viscous Laminar Flow
Solomon, B. R., Khalil, K. S., & Varanasi, K. K. (2014) · Langmuir · doi:10.1021/la5021143 · Cited by 312
Cui, J., Daniel, D., Grinthal, A., Lin, K., & Aizenberg, J. (2015) · Nature Materials · doi:10.1038/nmat4325 · Cited by 299
Urata, C., Dunderdale, G. J., England, M. W., & Hozumi, A. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02690c · Cited by 297
Liquid-Infused Silicone As a Biofouling-Free Medical Material
MacCallum, N., Howell, C., Kim, P., Sun, D., Friedlander, R., Ranisau, J., Ahanotu, O., Lin, J. J., Vena, A., Hatton, B., et al. (2015) · ACS Biomaterials Science & Engineering · doi:10.1021/ab5000578 · Cited by 289
Slippery Liquid-Infused Porous Surfaces Showing Marine Antibiofouling Properties
Xiao, L., Li, J., Mieszkin, S., Di Fino, A., Clare, A. S., Callow, M. E., Callow, J. A., Grunze, M., Rosenhahn, A., & Levkin, P. A. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am402635p · Cited by 289
Magnetic slippery extreme icephobic surfaces
Irajizad, P., Hasnain, M., Farokhnia, N., Sajadi, S. M., & Ghasemi, H. (2016) · Nature Communications · doi:10.1038/ncomms13395 · Cited by 284
Zhang, J., Gu, C., & Tu, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b00972 · Cited by 274
Latthe, S. S., Sutar, R. S., Bhosale, A. K., Nagappan, S., Ha, C.-S., Sadasivuni, K. K., Liu, S., & Xing, R. (2019) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2019.105373 · Cited by 273
Ice-phobic Coatings Based on Silicon-Oil-Infused Polydimethylsiloxane
Zhu, L., Xue, J., Wang, Y., Chen, Q., Ding, J., & Wang, Q. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400704z · Cited by 261
Dai, X., Stogin, B. B., Yang, S., & Wong, T.-S. (2015) · ACS Nano · doi:10.1021/acsnano.5b04151 · Cited by 258
Self-Replenishing Vascularized Fouling-Release Surfaces
Howell, C., Vu, T. L., Lin, J. J., Kolle, S., Juthani, N., Watson, E., Weaver, J. C., Alvarenga, J., & Aizenberg, J. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am503150y · Cited by 247
Lubricant‐Infused Nanoparticulate Coatings Assembled by Layer‐by‐Layer Deposition
Sunny, S., Vogel, N., Howell, C., Vu, T. L., & Aizenberg, J. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201401289 · Cited by 245
Durability of a lubricant-infused Electrospray Silicon Rubber surface as an anti-icing coating
Liu, Q., Yang, Y., Huang, M., Zhou, Y., Liu, Y., & Liang, X. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.02.051 · Cited by 241
Lubricant-Infused Surfaces for Low-Surface-Tension Fluids: Promise versus Reality
Sett, S., Yan, X., Barac, G., Bolton, L. W., & Miljkovic, N. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b10756 · Cited by 236
Stability of Surface-Immobilized Lubricant Interfaces under Flow
Howell, C., Vu, T. L., Johnson, C. P., Hou, X., Ahanotu, O., Alvarenga, J., Leslie, D. C., Uzun, O., Waterhouse, A., Kim, P., et al. (2015) · Chemistry of Materials · doi:10.1021/cm504652g · Cited by 232
Self-citationDropwise Condensation of Low Surface Tension Fluids on Omniphobic Surfaces
Rykaczewski, K., Paxson, A. T., Staymates, M., Walker, M. L., Sun, X., Anand, S., Srinivasan, S., McKinley, G. H., Chinn, J., Scott, J. H. J., et al. (2014) · Scientific Reports · doi:10.1038/srep04158 · Cited by 220
Marine Antifouling Behavior of Lubricant-Infused Nanowrinkled Polymeric Surfaces
Ware, C. S., Smith-Palmer, T., Peppou-Chapman, S., Scarratt, L. R. J., Humphries, E. M., Balzer, D., & Neto, C. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b14736 · Cited by 217
Self-citationHydrophobic Liquid-Infused Porous Polymer Surfaces for Antibacterial Applications
Li, J., Kleintschek, T., Rieder, A., Cheng, Y., Baumbach, T., Obst, U., Schwartz, T., & Levkin, P. A. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am401532z · Cited by 215
Droplets move over viscoelastic substrates by surfing a ridge
Karpitschka, S., Das, S., van Gorcum, M., Perrin, H., Andreotti, B., & Snoeijer, J. H. (2015) · Nature Communications · doi:10.1038/ncomms8891 · Cited by 209
Organogel‐based Thin Films for Self‐Cleaning on Various Surfaces
Liu, H., Zhang, P., Liu, M., Wang, S., & Jiang, L. (2013) · Advanced Materials · doi:10.1002/adma.201301289 · Cited by 203
Practical limits of resolution in confocal and non‐linear microscopy
Cox, G., & Sheppard, C. J. R. (2004) · Microscopy Research and Technique · doi:10.1002/jemt.10423 · Cited by 202
Silicone Brushes: Omniphobic Surfaces with Low Sliding Angles
Wooh, S., & Vollmer, D. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201511895 · Cited by 192
Wei, C., Zhang, G., Zhang, Q., Zhan, X., & Chen, F. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09879 · Cited by 190
Omniphobic “RF Paper” Produced by Silanization of Paper with Fluoroalkyltrichlorosilanes
Glavan, A. C., Martinez, R. V., Subramaniam, A. B., Yoon, H. J., Nunes, R. M. D., Lange, H., Thuo, M. M., & Whitesides, G. M. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201300780 · Cited by 188
The Nature of the Silicon–Oxygen Bond
Weinhold, F., & West, R. (2011) · Organometallics · doi:10.1021/om200675d · Cited by 187
Apparent contact angle and contact angle hysteresis on liquid infused surfaces
Semprebon, C., McHale, G., & Kusumaatmaja, H. (2017) · Soft Matter · doi:10.1039/c6sm00920d · Cited by 186
Development of “Liquid-like” Copolymer Nanocoatings for Reactive Oil-Repellent Surface
Liu, P., Zhang, H., He, W., Li, H., Jiang, J., Liu, M., Sun, H., He, M., Cui, J., Jiang, L., et al. (2017) · ACS Nano · doi:10.1021/acsnano.7b00046 · Cited by 186
Rao, S., & Riahi, K. (2006) · The Energy Journal · doi:10.5547/issn0195-6574-ej-volsi2006-nosi3-9 · Cited by 183
Wang, P., Zhang, D., Sun, S., Li, T., & Sun, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09117 · Cited by 180
Design of Lubricant Infused Surfaces
Preston, D. J., Song, Y., Lu, Z., Antao, D. S., & Wang, E. N. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b14311 · Cited by 180
Yong, J., Chen, F., Yang, Q., Yao, F., Huo, J., Zhang, J., & Hou, X. (2017) · Advanced Materials Interfaces · doi:10.1002/admi.201700552 · Cited by 177
Pharmacokinetics and Side Effects of Perfluorocarbon-Based Blood Substitutes
Flaim, S. F. (1994) · Artificial Cells, Blood Substitutes, and Biotechnology · doi:10.3109/10731199409138801 · Cited by 174
Manna, U., & Lynn, D. M. (2015) · Advanced Materials · doi:10.1002/adma.201500893 · Cited by 173
Ultrathin MoS2 Nanosheets with Superior Extreme Pressure Property as Boundary Lubricants
Chen, Z., Liu, X., Liu, Y., Gunsel, S., & Luo, J. (2015) · Scientific Reports · doi:10.1038/srep12869 · Cited by 173
Yeong, Y. H., Wang, C., Wynne, K. J., & Gupta, M. C. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11184 · Cited by 171
Condensate droplet size distribution on lubricant-infused surfaces
Weisensee, P. B., Wang, Y., Qian, H., Schultz, D., King, W. P., & Miljkovic, N. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.01.119 · Cited by 169
Improved Icephobic Properties on Surfaces with a Hydrophilic Lubricating Liquid
Ozbay, S., Yuceel, C., & Erbil, H. Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b07265 · Cited by 167
Manna, U., Raman, N., Welsh, M. A., Zayas‐Gonzalez, Y. M., Blackwell, H. E., Palecek, S. P., & Lynn, D. M. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201505522 · Cited by 166
Artificial Oxygen Carriers as Red Blood Cell Substitutes: A Selected Review and Current Status
Kim, H. W., & Greenburg, A. G. (2004) · Artificial Organs · doi:10.1111/j.1525-1594.2004.07345.x · Cited by 165
Origins of Extreme Liquid Repellency on Structured, Flat, and Lubricated Hydrophobic Surfaces
Daniel, D., Timonen, J. V. I., Li, R., Velling, S. J., Kreder, M. J., Tetreault, A. R., & Aizenberg, J. (2018) · Physical Review Letters · doi:10.1103/physrevlett.120.244503 · Cited by 163
Krumpfer, J. W., & McCarthy, T. J. (2010) · Faraday Discussions · doi:10.1039/b925045j · Cited by 162
Turbulent drag reduction over air- and liquid- impregnated surfaces
Rosenberg, B. J., Van Buren, T., Fu, M. K., & Smits, A. J. (2016) · Physics of Fluids · doi:10.1063/1.4939272 · Cited by 161
Drop friction on liquid-infused materials
Keiser, A., Keiser, L., Clanet, C., & Quéré, D. (2017) · Soft Matter · doi:10.1039/c7sm01226h · Cited by 161
Directional pumping of water and oil microdroplets on slippery surface
Jiang, J., Gao, J., Zhang, H., He, W., Zhang, J., Daniel, D., & Yao, X. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1817172116 · Cited by 161
Superoleophobic Slippery Lubricant‐Infused Surfaces: Combining Two Extremes in the Same Surface
Dong, Z., Schumann, M., Hokkanen, M. J., Chang, B., Welle, A., Zhou, Q. F., Ras, R. H. A., Xu, Z., Wegener, M., & Levkin, P. A. (2018) · Advanced Materials · doi:10.1002/adma.201803890 · Cited by 159
Daniel, D., Mankin, M. N., Belisle, R. A., Wong, T., & Aizenberg, J. (2013) · Applied Physics Letters · doi:10.1063/1.4810907 · Cited by 151
Multibioinspired slippery surfaces with wettable bump arrays for droplets pumping
Zhang, X., Sun, L., Wang, Y., Bian, F., Wang, Y., & Zhao, Y. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1912467116 · Cited by 151
Slippery liquid-infused porous surface for corrosion protection with self-healing property
Xiang, T., Zhang, M., Sadig, H. R., Li, Z., Zhang, M., Dong, C., Yang, L., Chan, W., & Li, C. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.03.137 · Cited by 150
Wang, P., Lu, Z., & Zhang, D. (2015) · Corrosion Science · doi:10.1016/j.corsci.2015.01.015 · Cited by 148
Heat Transfer Enhancement During Water and Hydrocarbon Condensation on Lubricant Infused Surfaces
Preston, D. J., Lu, Z., Song, Y., Zhao, Y., Wilke, K. L., Antao, D. S., Louis, M. M., & Wang, E. N. (2018) · Scientific Reports · doi:10.1038/s41598-017-18955-x · Cited by 146
Air-stable droplet interface bilayers on oil-infused surfaces
Boreyko, J. B., Polizos, G., Datskos, P. G., Sarles, S. A., & Collier, C. P. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1400381111 · Cited by 145
A review on the mechanical and thermodynamic robustness of superhydrophobic surfaces
Scarratt, L. R. J., Steiner, U., & Neto, C. (2017) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2017.05.018 · Cited by 142
Self-citationManabe, K., Nishizawa, S., Kyung, K.-H., & Shiratori, S. S. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am503352x · Cited by 139
Transparent antifouling material for improved operative field visibility in endoscopy
Sunny, S., Cheng, G., Daniel, D., Lo, P. C., Ochoa, S., Howell, C., Vogel, N., Majid, A., & Aizenberg, J. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1605272113 · Cited by 139
Coady, M. J., Wood, M. J., Wallace, G. Q., Nielsen, K. E., Kietzig, A., Lagugné‐Labarthet, F., & Ragogna, P. J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b14433 · Cited by 139
Barthwal, S., Lee, B., & Lim, S. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.143677 · Cited by 137
Active surfaces: Ferrofluid-impregnated surfaces for active manipulation of droplets
Khalil, K. S., Mahmoudi, S. R., Abu-Dheir, N., & Varanasi, K. K. (2014) · Applied Physics Letters · doi:10.1063/1.4891439 · Cited by 133
An immobilized liquid interface prevents device associated bacterial infection in vivo
Chen, J., Howell, C., Haller, C. A., Patel, M. S., Ayala, P., Moravec, K. A., Dai, E., Liu, L., Sotiri, I., Aizenberg, M., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.09.028 · Cited by 133
Lou, X., Huang, Y., Yang, X. J., Zhu, H., Heng, L., & Xia, F. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201901130 · Cited by 132
Transparent slippery liquid-infused nanoparticulate coatings
Liu, M., Hou, Y., Li, J., Tie, L., & Guo, Z. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.12.118 · Cited by 128
Badv, M., Jaffer, I., Weitz, J. I., & Didar, T. F. (2017) · Scientific Reports · doi:10.1038/s41598-017-12149-1 · Cited by 124
Wang, Z., Heng, L., & Jiang, L. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta10439a · Cited by 124
Viscoelastic solid-repellent coatings for extreme water saving and global sanitation
Wang, J., Wang, L., Sun, N., Tierney, R., Li, H., Corsetti, M., Williams, L., Wong, P. K., & Wong, T. (2019) · Nature Sustainability · doi:10.1038/s41893-019-0421-0 · Cited by 122
Fatty acid ionic liquids as environmentally friendly lubricants for low friction and wear
Gusain, R., & Khatri, O. P. (2016) · RSC Advances · doi:10.1039/c5ra25001c · Cited by 120
Goudie, M. J., Pant, J., & Handa, H. (2017) · Scientific Reports · doi:10.1038/s41598-017-14012-9 · Cited by 119
Omniphobic Slippery Coatings Based on Lubricant-Infused Porous Polyelectrolyte Multilayers
Huang, X., Chrisman, J. D., & Zacharia, N. S. (2013) · ACS Macro Letters · doi:10.1021/mz400387w · Cited by 118
McHale, G., Orme, B. V., Wells, G. G., & Ledesma‐Aguilar, R. (2019) · Langmuir · doi:10.1021/acs.langmuir.8b04136 · Cited by 117
Ma, W., Higaki, Y., Otsuka, H., & Takahara, A. (2012) · Chemical Communications · doi:10.1039/c2cc37576a · Cited by 111
Guo, J., Fang, W., Welle, A., Feng, W., Filpponen, I., Rojas, O. J., & Levkin, P. A. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11741 · Cited by 111
Badv, M., Imani, S. M., Weitz, J. I., & Didar, T. F. (2018) · ACS Nano · doi:10.1021/acsnano.8b03938 · Cited by 110
Corrosion protection application of slippery liquid-infused porous surface based on aluminum foil
Tuo, Y., Zhang, H., Chen, W., & Liu, X. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.06.170 · Cited by 109
Temperature-Responsive Anisotropic Slippery Surface for Smart Control of the Droplet Motion
Wang, B. L., Heng, L., & Jiang, L. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b16818 · Cited by 109
Drop Impact Dynamics on Oil-Infused Nanostructured Surfaces
Lee, C., Kim, H., & Nam, Y. (2014) · Langmuir · doi:10.1021/la501341x · Cited by 108
Food-Safe Modification of Stainless Steel Food-Processing Surfaces to Reduce Bacterial Biofilms
Awad, T. S., Asker, D., & Hatton, B. D. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b03788 · Cited by 107
Kratochvil, M. J., Welsh, M. A., Manna, U., Ortiz, B. J., Blackwell, H. E., & Lynn, D. M. (2016) · ACS Infectious Diseases · doi:10.1021/acsinfecdis.6b00065 · Cited by 104
Effect of viscosity ratio on the shear-driven failure of liquid-infused surfaces
Liu, Y., Wexler, J. S., Schönecker, C., & Stone, H. A. (2016) · Physical Review Fluids · doi:10.1103/physrevfluids.1.074003 · Cited by 104
Su, Z., & Xu, S. (2017) · Scientific Reports · doi:10.1038/s41598-017-00065-3 · Cited by 104
Antiadhesion Organogel Materials: From Liquid to Solid
Lv, J., Yao, X., Zheng, Y., Wang, J., & Jiang, L. (2017) · Advanced Materials · doi:10.1002/adma.201703032 · Cited by 99
Green biolubricant infused slippery surfaces to combat marine biofouling
Basu, S., Hanh, B. M., Chua, J. Q. I., Daniel, D., Ismail, M. H., Marchioro, M., Amini, S., Rice, S. A., & Miserez, A. (2020) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2020.02.049 · Cited by 99
High-Transparency, Self-Standable Gel-SLIPS Fabricated by a Facile Nanoscale Phase Separation
Okada, I., & Shiratori, S. S. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am404077h · Cited by 98
Immobilized liquid layers: A new approach to anti-adhesion surfaces for medical applications
Sotiri, I., Overton, J. C., Waterhouse, A., & Howell, C. (2016) · Experimental Biology and Medicine · doi:10.1177/1535370216640942 · Cited by 98
Self-citationZhang, G., Zhang, Q., Cheng, T., Zhan, X., & Chen, F. (2018) · Langmuir · doi:10.1021/acs.langmuir.8b00286 · Cited by 98
Woodcock, M. R., Vaughn-Wolfe, J., Elias, A. W., Kump, D. K., Kendall, K. D., Timoshevskaya, N. Y., Timoshevskiy, V. A., Perry, D. W., Smith, J. J., Spiewak, J. E., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-00059-1 · Cited by 97
Zhuo, Y., Wang, F., Xiao, S., He, J., & Zhang, Z. (2018) · ACS Omega · doi:10.1021/acsomega.8b01148 · Cited by 97
A nature-inspired lubricant-infused surface for sustainable drag reduction
Lee, S. J., Kim, H. N., Choi, W., Yoon, G. Y., & Seo, E. (2019) · Soft Matter · doi:10.1039/c9sm01576k · Cited by 97
Bioinspired Omniphobic Coatings with a Thermal Self-Repair Function on Industrial Materials
Wang, J., Kato, K., Blois, A. P., & Wong, T. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00194 · Cited by 96
Wu, L., Dong, Z., Du, H., Li, C., Fang, N. X., & Song, Y. (2018) · Research · doi:10.1155/2018/4795604 · Cited by 96
Martín‐Rodríguez, A. J., Babarro, J. M. F., Lahoz, F. J., Sansón, M., Martín, V. S., Norte, M., & Fernández, J. J. (2015) · PLoS ONE · doi:10.1371/journal.pone.0123652 · Cited by 94
Decamethylcyclopentasiloxane (D5) environmental sources, fate, transport, and routes of exposure
Mackay, D., Cowan‐Ellsberry, C., Powell, D. E., Woodburn, K. B., Xu, S., Kozerski, G. E., & Kim, J. (2015) · Environmental Toxicology and Chemistry · doi:10.1002/etc.2941 · Cited by 94
You, I., Lee, T. G., Nam, Y. S., & Lee, H. (2014) · ACS Nano · doi:10.1021/nn502226v · Cited by 93
Wu, D., Ma, L., Zhang, F., Qian, H., Minhas, B., Yang, Y., Han, X., & Zhang, D. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108236 · Cited by 93
Development of Laser-Structured Liquid-Infused Titanium with Strong Biofilm-Repellent Properties
Doll, K., Fadeeva, E., Schaeske, J., Ehmke, T., Winkel, A., Heisterkamp, A., Chichkov, B. N., Stiesch, M., & Stumpp, N. S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b16159 · Cited by 91
Qiu, R., Zhang, Q. J., Wang, P., Jiang, L., Hou, J., Guo, W., & Zhang, H. (2014) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2014.04.035 · Cited by 90
Droplet Impact Dynamics on Lubricant-Infused Superhydrophobic Surfaces: The Role of Viscosity Ratio
Kim, J.-H., & Rothstein, J. P. (2016) · Langmuir · doi:10.1021/acs.langmuir.6b01994 · Cited by 86
Perfluorocarbon Liquid: Its Application in Vitreoretinal Surgery and Related Ocular Inflammation
Yu, Q., Liu, K., Su, L., Xia, X., & Xu, X. (2014) · BioMed Research International · doi:10.1155/2014/250323 · Cited by 85
Li, Q., & Guo, Z. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2018.10.083 · Cited by 85
Nature-Inspired Liquid Infused Systems for Superwettable Surface Energies
Ashrafi, Z., Lucia, L. A., & Krause, W. E. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b00930 · Cited by 84
Recent Advances in Bioinspired Gel Surfaces with Superwettability and Special Adhesion
Zhang, P., Zhao, C., Zhao, T., Liu, M., & Jiang, L. (2019) · Advanced Science · doi:10.1002/advs.201900996 · Cited by 84
Slippery Liquid-Attached Surface for Robust Biofouling Resistance
Wu, Q., Yang, C., Chen, S., Zhong, L., Zhou, L., Hang, T., Lin, H., Chen, W., Li, L. X., & Xie, X. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b01323 · Cited by 84
Liquid infused porous surfaces for mineral fouling mitigation
Charpentier, T., Neville, A., Baudin, S., Smith, M. J., Euvrard, M., Bell, A., Wang, C., & Barker, R. (2014) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2014.12.043 · Cited by 79
Daniel, D., Chia, A. Y. T., Moh, L. C. H., Liu, R., Koh, X. Q., Zhang, X., & Tomczak, N. (2019) · Communications Physics · doi:10.1038/s42005-019-0205-x · Cited by 76
Yuan, S., Li, Z., Song, L., Shi, H., Luan, S., & Yin, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b06407 · Cited by 75
Juuti, P., Haapanen, J., Stenroos, C., Niemelä‐Anttonen, H., Harra, J., Koivuluoto, H., Teisala, H., Lahti, J., Tuominen, M., Kuusipalo, J., et al. (2017) · Applied Physics Letters · doi:10.1063/1.4981905 · Cited by 75
Drop impact dynamics on slippery liquid-infused porous surfaces: influence of oil thickness
Muschi, M., Brudieu, B., Teisseire, J., & Sauret, A. (2018) · Soft Matter · doi:10.1039/c7sm02026k · Cited by 74
Study of Biofilm Growth on Slippery Liquid-Infused Porous Surfaces Made from Fluoropor
Keller, N., Bruchmann, J., Sollich, T., Richter, C., Thelen, R., Kotz, F., Schwartz, T., Helmer, D., & Rapp, B. E. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b12542 · Cited by 74
Transparent self-cleaning lubricant-infused surfaces made with large-area breath figure patterns
Zhang, P., Chen, H., Zhang, L., Ran, T., & Zhang, D. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.07.159 · Cited by 73
Jin, B., Liu, M., Zhang, Q., Zhan, X., & Chen, F. (2017) · Langmuir · doi:10.1021/acs.langmuir.7b02691 · Cited by 70
Drop transport and positioning on lubricant-impregnated surfaces
Guan, J. H., Ruiz-Gutiérrez, É., Xu, B. B., Wood, D., McHale, G., Ledesma‐Aguilar, R., & Wells, G. G. (2017) · Soft Matter · doi:10.1039/c7sm00290d · Cited by 69
An Ultra‐Shapeable, Smart Sensing Platform Based on a Multimodal Ferrofluid‐Infused Surface
Ahmed, A., Hassan, I., Mosa, I. M., Elsanadidy, E., Sharafeldin, M., Rusling, J. F., & Ren, S. (2019) · Advanced Materials · doi:10.1002/adma.201807201 · Cited by 69
Microdroplet self-propulsion during dropwise condensation on lubricant-infused surfaces
Sun, J., & Weisensee, P. B. (2019) · Soft Matter · doi:10.1039/c9sm00493a · Cited by 66
A Fluorine-free Slippery Surface with Hot Water Repellency and Improved Stability against Boiling
Togasawa, R., Tenjimbayashi, M., Matsubayashi, T., Moriya, T., Manabe, K., & Shiratori, S. S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b15689 · Cited by 65
Surface Functionalization for a Nontextured Liquid-Infused Surface with Enhanced Lifetime
Zhang, C., Xia, Y., Zhang, H., & Zacharia, N. S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18021 · Cited by 64
Temperature-Driven Precise Control of Biological Droplet’s Adhesion on a Slippery Surface
Wang, J., Huang, Y., You, K., Yang, X. J., Song, Y., Zhu, H. F., Xia, F., & Jiang, L. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b21088 · Cited by 64
Cui, W., & Pakkanen, T. A. (2019) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2019.09.119 · Cited by 64
Identification of Ground Beef–Derived Fatty Acid Inhibitors of Autoinducer-2–Based Cell Signaling
Soni, K. A., Jesudhasan, P. R. R., Cepeda, M., Widmer, K. W., Jayaprakasha, G. K., Patil, B. S., Hume, M. E., & Pillai, S. D. (2008) · Journal of Food Protection · doi:10.4315/0362-028x-71.1.134 · Cited by 62
Miranda, D., Urata, C., Masheder, B., Dunderdale, G. J., Yagihashi, M., & Hozumi, A. (2014) · APL Materials · doi:10.1063/1.4876636 · Cited by 62
Wang, N., Xiong, D., Pan, S., Wang, K., Shi, Y., & Deng, Y. (2017) · New Journal of Chemistry · doi:10.1039/c6nj02824a · Cited by 62
Ionic liquids-infused slippery surfaces for condensation and hot water repellency
Wang, X. Q., Gu, C., Wang, L. Y., Zhang, J. L., & Tu, J. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.03.045 · Cited by 61
Droplet Morphology and Mobility on Lubricant-Impregnated Surfaces: A Molecular Dynamics Study
Guo, L., Tang, G. H., & Satish, K. (2019) · Langmuir · doi:10.1021/acs.langmuir.9b02603 · Cited by 60
Lee, J., Yoo, J. H., Kim, J., Jang, Y., Shin, K., Ha, E., Ryu, S., Kim, B., Wooh, S., & Char, K. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b20092 · Cited by 58
Antifouling digital microfluidics using lubricant infused porous film
Geng, H., & Cho, S. K. (2019) · Lab on a Chip · doi:10.1039/c9lc00289h · Cited by 58
Shape of a sessile drop on a flat surface covered with a liquid film
Treß, M., Karpitschka, S., Papadopoulos, P., Snoeijer, J. H., Vollmer, D., & Butt, H. (2017) · Soft Matter · doi:10.1039/c7sm00437k · Cited by 56
Zhou, X., Lee, Y. Y., Chong, K. S. L., & He, C. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb02457f · Cited by 55
Sousa, M. F. B., Loureiro, H. C., & Bertran, C. A. (2019) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2019.125160 · Cited by 55
3D Imaging of Water-Drop Condensation on Hydrophobic and Hydrophilic Lubricant-Impregnated Surfaces
Kajiya, T., Schellenberger, F., Papadopoulos, P., Vollmer, D., & Butt, H. (2016) · Scientific Reports · doi:10.1038/srep23687 · Cited by 54
He, W., Liu, P., Jiang, J., Liu, M., Li, H., Zhang, J., Luo, Y., Cheung, H., & Yao, X. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta10780c · Cited by 53
Liu, Y., Tian, Y., Chen, J., Gu, H., Liu, J., Wang, R., Zhang, B., Zhang, H., & Zhang, Q. (2019) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2019.124384 · Cited by 53
Self-healing fluoropolymer brushes as highly polymer-repellent coatings
Wang, Z., & Zuilhof, H. T. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09209d · Cited by 52
Nepenthes: State of the art of an inspiring plant for biotechnologists
Miguel, S., Hehn, A., & Bourgaud, F. (2017) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2017.11.014 · Cited by 52
Gao, Z. F., Liu, R., Wang, J., Dai, J., Huang, W., Liu, M., Wang, S., Xia, F., & Jiang, L. (2018) · Chem · doi:10.1016/j.chempr.2018.09.028 · Cited by 52
Yamazaki, T., Tenjimbayashi, M., Manabe, K., Moriya, T., Nakamura, H., Nakamura, T., Matsubayashi, T., Tsuge, Y., & Shiratori, S. S. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b05927 · Cited by 52
Scarratt, L. R. J., Zhu, L., & Neto, C. (2019) · Langmuir · doi:10.1021/acs.langmuir.8b03767 · Cited by 50
Self-citationShi, G., Wang, Y., Derakhshanfar, S., Xu, K., Zhong, W., Luo, G., Liu, T., Wang, Y., Wu, J., & Xing, M. M. Q. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.03.058 · Cited by 50
Ujjain, S. K., Roy, P. K., Kumar, S., Singha, S., & Khare, K. (2016) · Scientific Reports · doi:10.1038/srep35524 · Cited by 48
Liquid–liquid displacement in slippery liquid-infused membranes (SLIMs)
Bazyar, H., Lv, P., Wood, J. A., Porada, S., Lohse, D., & Lammertink, R. G. H. (2018) · Soft Matter · doi:10.1039/c7sm02337e · Cited by 47
Ouyang, Y., Zhao, J., Qiu, R., Hu, S., Zhang, Y., & Wang, P. (2018) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2018.09.060 · Cited by 47
Flow‐Induced Long‐Term Stable Slippery Surfaces
Baumli, P., Teisala, H., Bauer, H., García-González, D., Damle, V. G., Geyer, F., D’Acunzi, M., Kaltbeitzel, A., Butt, H., & Vollmer, D. (2019) · Advanced Science · doi:10.1002/advs.201900019 · Cited by 47
Jiao, N., Barnett, G. V., Christian, T. R., Narhi, L. O., Joh, N. H., Joubert, M. K., & Cao, S. (2019) · Journal of Pharmaceutical Sciences · doi:10.1016/j.xphs.2019.10.066 · Cited by 47
Zhang, P., Liu, G., Zhang, D., & Chen, H. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b13373 · Cited by 46
Badv, M., Alonso-Cantu, C., Shakeri, A., Hosseinidoust, Z., Weitz, J. I., & Didar, T. F. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b01062 · Cited by 45
Fatty acids as antifoulants in a marine sponge
Goto, R., Kado, R., Muramoto, K., & Kamiya, H. (1992) · Biofouling · doi:10.1080/08927019209386210 · Cited by 44
Biofilm Bridges Forming Structural Networks on Patterned Lubricant‐Infused Surfaces
Lei, W., Bruchmann, J., Rüping, J. L., Levkin, P. A., & Schwartz, T. (2019) · Advanced Science · doi:10.1002/advs.201900519 · Cited by 43
Atmospheric lifetime and global warming potential of a perfluoropolyether
Young, C. J., Hurley, M. D., Wallington, T. J., & Mabury, S. A. (2006) · Environmental Science & Technology · doi:10.1021/es052077z · Cited by 41
On the Gating Mechanism of Slippery Liquid Infused Porous Membranes
Bazyar, H., Javadpour, S., & Lammertink, R. G. H. (2016) · Advanced Materials Interfaces · doi:10.1002/admi.201600025 · Cited by 41
Rapid Surface Functionalization of Hydrogen-Terminated Silicon by Alkyl Silanols
Escorihuela, J., & Zuilhof, H. T. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b01106 · Cited by 41
Contact angle dynamics on pseudo-brushes: Effects of polymer chain length and wetting liquid
Lhermerout, R., & Davitt, K. M. (2019) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2019.01.006 · Cited by 41
Effect of Ageing on the Structure and Properties of Model Liquid-Infused Surfaces
Goodband, S. J., Armstrong, S., Kusumaatmaja, H., & Voïtchovsky, K. (2020) · Langmuir · doi:10.1021/acs.langmuir.0c00059 · Cited by 41
Liquid-impregnated porous polypropylene surfaces for liquid repellency
Brown, P. S., & Bhushan, B. (2016) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2016.10.079 · Cited by 40
Enhanced slip properties of lubricant-infused grooves
Asmolov, E. S., Nizkaya, T. V., & Vinogradova, O. I. (2018) · Physical review. E · doi:10.1103/physreve.98.033103 · Cited by 40
Ionic-Liquid-Infused Nanostructures as Repellent Surfaces
Galvan, Y., Phillips, K. R., Haumann, M., Wasserscheid, P., Zárraga, R., & Vogel, N. (2018) · Langmuir · doi:10.1021/acs.langmuir.7b03993 · Cited by 39
Chen, C., Zhou, L., Shi, L., Zhu, S., Huang, Z., Xue, C., Li, J., Hu, Y., Wu, D. Q., & Chu, J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b17936 · Cited by 39
Droplets on Slippery Lubricant-Infused Porous Surfaces: A Macroscale to Nanoscale Perspective
Pham, Q. N., Zhang, S., Montazeri, K., & Won, Y. (2018) · Langmuir · doi:10.1021/acs.langmuir.8b02765 · Cited by 38
Cui, W., & Pakkanen, T. A. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.144061 · Cited by 38
Clinical Potential of Immobilized Liquid Interfaces: Perspectives on Biological Interactions
Mackie, G. M., Gao, L., Yau, S., Leslie, D. C., & Waterhouse, A. (2018) · Trends in biotechnology · doi:10.1016/j.tibtech.2018.08.003 · Cited by 37
Self-citationPatterned Slippery Surface through Dynamically Controlling Surface Structures for Droplet Microarray
Huang, W., Chen, X., Hu, M., Hu, D., Wang, J., Li, H.-Y., Ren, K., & Ji, J. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b03957 · Cited by 37
Damle, V. G., Tummala, A., Chandrashekar, S., Kido, C., Roopesh, A., Sun, X., Doudrick, K., Chinn, J., Lee, J. R., Burgin, T. P., et al. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am5085226 · Cited by 36
Li, T., Zhuo, Y., Håkonsen, V., Rønneberg, S., He, J., & Zhang, Z. (2019) · Coatings · doi:10.3390/coatings9100602 · Cited by 36
Oil-Impregnated Hydrocarbon-Based Polymer Films
Mukherjee, R., Habibi, M., Rashed, Z. T., Berbert, O., Shi, X., & Boreyko, J. B. (2018) · Scientific Reports · doi:10.1038/s41598-018-29823-7 · Cited by 35
Rowthu, S., & Hoffmann, P. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b00061 · Cited by 33
Tonelli, M., Peppou-Chapman, S., Ridi, F., & Neto, C. (2019) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b11221 · Cited by 33
Self-citationDouble-sided slippery liquid-infused porous materials using conformable mesh
Geraldi, N. R., Guan, J. H., Dodd, L. E., Maiello, P., Xu, B. B., Wood, D., Newton, M. I., Wells, G. G., & McHale, G. (2019) · Scientific Reports · doi:10.1038/s41598-019-49887-3 · Cited by 31
Slipperiness and stability of hydrophilic surfaces coated with a lubricating fluid
Pant, R., Roy, P. K., Nagarajan, A. K., & Khare, K. (2016) · RSC Advances · doi:10.1039/c5ra23140j · Cited by 30
Perfluorodecalin: global warming potential and first detection in the atmosphere
Shine, K. P., Gohar, L., HURLEY, M., Marston, G., MARTIN, D., SIMMONDS, P., Wallington, T. J., & WATKINS, M. (2005) · Atmospheric Environment · doi:10.1016/j.atmosenv.2005.01.001 · Cited by 29
Effect of the texture geometry on the slippery behavior of liquid-infused nanoporous surfaces
Cui, J., Zhu, H., Tu, Z., Niu, D., Liu, G., Bei, Y., & Zhu, Q. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2972-2 · Cited by 29
Designing air-independent slippery rough surfaces for condensation
Sirohia, G. K., & Dai, X. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.06.035 · Cited by 28
Fluorocarbon lubricant impregnated nanoporous oxide for omnicorrosion-resistant stainless steel
Lee, J., Wooh, S., & Choi, C. (2019) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2019.09.117 · Cited by 27
Infusing Lubricant onto Erasable Microstructured Surfaces toward Guided Sliding of Liquid Droplets
Chen, X., Ren, K., Wang, J., Lei, W., & Ji, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b14081 · Cited by 26
Lu, Y., He, G., Carmalt, C. J., & Parkin, I. P. (2016) · RSC Advances · doi:10.1039/c6ra20392b · Cited by 25
Responsive Ionogel Surface with Renewable Antibiofouling Properties
Ye, L., Chen, F., Liu, J., Gao, A., Kircher, G., Liu, W., Kappl, M., Wegner, S. V., Butt, H., & Steffen, W. (2019) · Macromolecular Rapid Communications · doi:10.1002/marc.201900395 · Cited by 24
Metadata
- Authors
- Peppou-Chapman, S., Hong, J. K., Waterhouse, A., & Neto, C.
- Venue
- Chemical Society Reviews
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2020
- Volume
- 49
- Issue
- 11
- Pages
- 3688-3715
- ISSN
- 0306-0012 (ISSN-L)
- 1460-4744
- OpenAlex
- W3024533427
- Cited by
- 373
- References
- 216
- FWCI
- 3.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.