Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 456

The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.

Dielectric breakdown mechanisms in gate oxides

Lombardo, Salvatore, Stathis, James H., Linder, Barry P., Pey, Kin Leong, Palumbo, Felix, Tung, Chih Hang·2005·Journal of Applied Physics

Abstract

In this paper we review the subject of oxide breakdown (BD), focusing our attention on the case of the gate dielectrics of interest for current Si microelectronics, i.e., Si oxides or oxynitrides of thickness ranging from some tens of nanometers down to about 1nm. The first part of the paper is devoted to a concise description of the subject concerning the kinetics of oxide degradation under high-voltage stress and the statistics of the time to BD. It is shown that, according to the present understanding, the BD event is due to a buildup in the oxide bulk of defects produced by the stress at high voltage. Defect concentration increases up to a critical value corresponding to the onset of one percolation path joining the gate and substrate across the oxide. This triggers the BD, which is therefore believed to be an intrinsic effect, not due to preexisting, extrinsic defects or processing errors. We next focus our attention on experimental studies concerning the kinetics of the final event of BD, during which the gate leakage increases above acceptable levels. In conditions of intrinsic BD, the leakage increase is due to the growth of damage within the oxide in localized regions. Observations concerning this damage are reviewed and discussed. The measurement of the current, voltage, and power dissipated during the BD transient are also reported and discussed in comparison with the data of structural damage. We then describe the current understanding concerning the dependence of the BD current transient on the conditions of electric field and voltage. In particular, as the oxide thickness and, as a consequence, the voltage levels used for accelerated reliability tests have decreased, the BD transient exhibits a marked change in behavior. As the stress voltage is decreased below a threshold value, the BD transient becomes slower. This recently discovered phenomenon has been termed progressive BD, i.e., a gradual growth of the BD spot and of the gate leakage, with a time scale that under operation conditions can be a large fraction of the total time to BD. We review the literature on this phenomenon, describing the current understanding concerning the dependence of the effect on voltage, temperature, oxide thickness, sample geometry, and its physical structure. We also discuss the possible relation to the so-called soft oxide BD mode and propose a simpler, more consistent terminology to describe different BD regimes. The last part of the paper is dedicated to exploratory studies, still at the early stages given the very recent subject, concerning the impact on the BD of materials for the metal-oxide-semiconductor gate stack and, in particular, metal gates.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1063/1.2147714

Cites

28 of 28 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 28 references

Cited by

See all 456

Metadata

Authors
Lombardo, S., Stathis, J. H., Linder, B. P., Pey, K. L., Palumbo, F., & Tung, C. H.
Venue
Journal of Applied Physics
Published
2005-12-15
Volume
98
Issue
12
ISSN
  • 0021-8979 (ISSN-L)
  • 1089-7550
OpenAlex
W2019912636
Cited by
456
References
28
FWCI
17.48
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Dielectric breakdown mechanisms in gate oxides. https://app.cochat.ai/papers/10.1063/1.2147714
The paper
Lombardo, S., Stathis, J. H., Linder, B. P., Pey, K. L., Palumbo, F., & Tung, C. H. (2005). Dielectric breakdown mechanisms in gate oxides. Journal of Applied Physics. https://doi.org/10.1063/1.2147714

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.