The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Dependence of indium–tin–oxide work function on surface cleaning method as studied by ultraviolet and x-ray photoemission spectroscopies
Abstract
The effect of the method used to clean indium–tin–oxide (ITO) on its work function was investigated by ultraviolet photoemission spectroscopy (UPS) and x-ray photoemission spectroscopy. With only ultrasonic cleaning in the organic solvent, considerable carbon contamination remained on the ITO surface and the work function was low (4.5 eV). In contrast, ultraviolet (UV)–ozone treatment removed significant carbon contamination, with an increase in the work function to 4.75 eV, which improves the hole-injection efficiency into the organic hole-transport layer in organic electroluminescent devices. Although carbon contamination on the ITO surface was also removed by Ar+ sputtering, it was accompanied by the removal of oxygen from ITO, and the work function was reduced (4.3 eV). Three factors, i.e.,: (i) C-containing contaminants, (ii) the O/In ratio, and (iii) the In/Sn ratio on the ITO surface affect the work function. The present results and those of other workers suggest that these three factors affect the work function in the order: (ii)>(i)>(iii), and (i) is the main cause of the increase in the work function in the UV–ozone or O2 plasma treatments.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organic electroluminescent diodes
Tang, C. W., & VanSlyke, S. A. (1987) · Applied Physics Letters · doi:10.1063/1.98799 · Cited by 14,363
Two-layer organic photovoltaic cell
Tang, C. W. (1986) · Applied Physics Letters · doi:10.1063/1.96937 · Cited by 5,002
Organic Electroluminescent Devices
Sheats, J. R., Antoniadis, H., Hueschen, M., Leonard, W., Miller, J., Moon, R., Roitman, D., & Stocking, A. (1996) · Science · doi:10.1126/science.273.5277.884 · Cited by 1,096
X-ray photoemission spectroscopy studies of Sn-doped indium-oxide films
Fan, J. C. C., & Goodenough, J. B. (1977) · Journal of Applied Physics · doi:10.1063/1.324149 · Cited by 1,085
Wu, C. C., Wu, C. I., Sturm, J. C., & Kahn, A. (1997) · Applied Physics Letters · doi:10.1063/1.118575 · Cited by 715
Work function of indium tin oxide transparent conductor measured by photoelectron spectroscopy
Park, Y., Choong, V., Gao, Y., Hsieh, B. R., & Tang, C. W. (1996) · Applied Physics Letters · doi:10.1063/1.116313 · Cited by 690
Cited by
Conjugated Polymer-Based Organic Solar Cells
Günes, S., Neugebauer, H., & Sariciftci, N. S. (2007) · Chemical Reviews · doi:10.1021/cr050149z · Cited by 6,279
Organic solar cells: An overview
Hoppe, H., & Sariciftci, N. S. (2004) · Journal of Materials Research · doi:10.1557/jmr.2004.0252 · Cited by 2,556
The electroluminescence of organic materials
Mitschke, U., & Bäuerle, P. (2000) · Journal of Materials Chemistry · doi:10.1039/a908713c · Cited by 1,742
Transparent conducting oxides for electrode applications in light emitting and absorbing devices
Liu, H., Avrutin, V., Izyumskaya, N., Özgür, Ü., & Morkoç, H. (2010) · Superlattices and Microstructures · doi:10.1016/j.spmi.2010.08.011 · Cited by 641
Maiti, U. N., Lee, W. J., Lee, J. M., Oh, Y., Kim, J. Y., Kim, J. E., Shim, J., Han, T. H., & Kim, S. O. (2014) · Advanced Materials · doi:10.1002/adma.201303265 · Cited by 544
Transparent Conducting Oxides—An Up-To-Date Overview
Stadler, A. (2012) · Materials · doi:10.3390/ma5040661 · Cited by 448
Greiner, M. T., & Lu, Z.-H. (2013) · NPG Asia Materials · doi:10.1038/am.2013.29 · Cited by 444
Efficient hole-blocking layer-free planar halide perovskite thin-film solar cells
Ke, W., Fang, G., Wan, J., Tao, H., Liu, Q., Xiong, L., Qin, P., Wang, J., Lei, H., Yang, G., et al. (2015) · Nature Communications · doi:10.1038/ncomms7700 · Cited by 420
Metal oxides for interface engineering in polymer solar cells
Chen, S., Manders, J. R., Tsang, S.-W., & So, F. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm33838f · Cited by 370
Phosphonic Acids for Interfacial Engineering of Transparent Conductive Oxides
Paniagua, S. A., Giordano, A. J., Smith, O. L., Barlow, S., Li, H., Armstrong, N. R., Pemberton, J. E., Brédas, J.-L., Ginger, D., & Marder, S. R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00061 · Cited by 347
Transparent electrodes for organic optoelectronic devices: a review
Cao, W., Li, J., Chen, H., & Xue, J. (2014) · Journal of Photonics for Energy · doi:10.1117/1.jpe.4.040990 · Cited by 335
Hwang, J. O., Park, J. S., Choi, D. S., Kim, J. Y., Lee, S. H., Lee, K. E., Kim, Y.-H., Song, M. H., Yoo, S., & Kim, S. O. (2012) · ACS Nano · doi:10.1021/nn203176u · Cited by 312
Work function measurements on indium tin oxide films
Schlaf, R., Murata, H., & Kafafi, Z. H. (2001) · Journal of Electron Spectroscopy and Related Phenomena · doi:10.1016/s0368-2048(01)00310-3 · Cited by 278
Single‐wall carbon nanotube–polymer solar cells
Landi, B. J., Raffaelle, R. P., Castro, S. L., & Bailey, S. G. (2005) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.604 · Cited by 269
Solution-Processed Transparent Electrodes for Emerging Thin-Film Solar Cells
Zhang, Y., Ng, S.-W., Lu, X., & Zheng, Z. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00483 · Cited by 264
Metadata
- Authors
- Sugiyama, K., Ishii, H., Ouchi, Y., & Seki, K.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 2000-01-01
- Volume
- 87
- Issue
- 1
- Pages
- 295-298
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W1970181484
- Cited by
- 546
- References
- 6
- FWCI
- 21.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.