The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Design and optimization of a light-emitting diode projection micro-stereolithography three-dimensional manufacturing system
Open accessAbstract
The rapid manufacture of complex three-dimensional micro-scale components has eluded researchers for decades. Several additive manufacturing options have been limited by either speed or the ability to fabricate true three-dimensional structures. Projection micro-stereolithography (PμSL) is a low cost, high throughput additive fabrication technique capable of generating three-dimensional microstructures in a bottom-up, layer by layer fashion. The PμSL system is reliable and capable of manufacturing a variety of highly complex, three-dimensional structures from micro- to meso-scales with micro-scale architecture and submicron precision. Our PμSL system utilizes a reconfigurable digital mask and a 395 nm light-emitting diode (LED) array to polymerize a liquid monomer in a layer-by-layer manufacturing process. This paper discusses the critical process parameters that influence polymerization depth and structure quality. Experimental characterization and performance of the LED-based PμSL system for fabricating highly complex three-dimensional structures for a large range of applications is presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Xia, Y., & Whitesides, G. M. (1998) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.28.1.153 · Cited by 4,611
Projection micro-stereolithography using digital micro-mirror dynamic mask
Sun, C., Fang, N., Wu, D. M., & Zhang, X. (2005) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2004.12.011 · Cited by 880
Self-citationGibson, L. J. (2003) · MRS Bulletin · doi:10.1557/mrs2003.79 · Cited by 701
A calorimetric study of acrylate photopolymerization
Tryson, G. R., & Shultz, A. R. (1979) · Journal of Polymer Science: Polymer Physics Edition · doi:10.1002/pol.1979.180171202 · Cited by 245
First jump of microgel; actuation speed enhancement by elastic instability
Lee, H., Xia, C., & Fang, N. X. (2010) · Soft Matter · doi:10.1039/c0sm00092b · Cited by 226
Self-citationCentola, M., Rainer, A., Spadaccio, C., De Porcellinis, S., Genovese, J. A., & Trombetta, M. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/014102 · Cited by 177
First jump of microgel; actuation speed enhancement by elastic instability
Lee, H., Xia, C., & Fang, N. X. (2010) · Rutgers University Community Repository (Rutgers University) · doi:10.7282/t3p271df · Cited by 148
Self-citationFabrication of microneedle array using LIGA and hot embossing process
Moon, S. J., Lee, S. S., Lee, H. S., & Kwon, T. H. (2005) · Microsystem Technologies · doi:10.1007/s00542-004-0446-8 · Cited by 116
Self-citationA Multiscale Assembly and Packaging System for Manufacturing of Complex Micro-Nano Devices
Das, A. N., Murthy, R., Popa, D. O., & Stephanou, H. E. (2011) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2011.2173570 · Cited by 89
Direct laser writing of whispering gallery microcavities by two-photon polymerization
Liu, Z.-P., Li, Y., Xiao, Y., Li, B., Jiang, X., Qin, Y., Feng, X., Yang, H., & Gong, Q. (2010) · Applied Physics Letters · doi:10.1063/1.3517493 · Cited by 84
Cited by
Ultralight, ultrastiff mechanical metamaterials
Zheng, X., Lee, H., Weisgraber, T. H., Shusteff, M., DeOtte, J., Duoss, E. B., Kuntz, J. D., Biener, M. M., Ge, Q., Jackson, J. A., et al. (2014) · Science · doi:10.1126/science.1252291 · Cited by 2,308
Self-citationPrinting soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
Self-citation3D printed microfluidic devices: enablers and barriers
Waheed, S., Cabot, J. M., Macdonald, N. P., Lewis, T., Guijt, R. M., Paull, B., & Breadmore, M. C. (2016) · Lab on a Chip · doi:10.1039/c6lc00284f · Cited by 1,039
Mechanical Metamaterials and Their Engineering Applications
Surjadi, J. U., Gao, L., Du, H., Li, X., Xiong, X., Fang, N. X., & Lu, Y. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201800864 · Cited by 982
Self-citationMultiscale metallic metamaterials
Zheng, X., Smith, W., Jackson, J., Moran, B., Cui, H., Chen, D., Ye, J., Fang, N., Rodriguez, N., Weisgraber, T., et al. (2016) · Nature Materials · doi:10.1038/nmat4694 · Cited by 870
Self-citationApproaching theoretical strength in glassy carbon nanolattices
Bauer, J., Schroer, A., Schwaiger, R., & Kraft, O. (2016) · Nature Materials · doi:10.1038/nmat4561 · Cited by 689
Highly Stretchable and UV Curable Elastomers for Digital Light Processing Based 3D Printing
Patel, D. K., Sakhaei, A. H., Layani, M., Zhang, B., Ge, Q., & Magdassi, S. (2017) · Advanced Materials · doi:10.1002/adma.201606000 · Cited by 673
Printing, folding and assembly methods for forming 3D mesostructures in advanced materials
Zhang, Y., Zhang, F., Yan, Z., Ma, Q., Li, X., Huang, Y., & Rogers, J. A. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.19 · Cited by 620
Nanolattices: An Emerging Class of Mechanical Metamaterials
Bauer, J., Meza, L. R., Schaedler, T. A., Schwaiger, R., Zheng, X., & Valdevit, L. (2017) · Advanced Materials · doi:10.1002/adma.201701850 · Cited by 592
Self-citationScalable submicrometer additive manufacturing
Saha, S. K., Wang, D., Nguyen, V. H., Chang, Y., Oakdale, J. S., & Chen, S.-C. (2019) · Science · doi:10.1126/science.aax8760 · Cited by 513
Cost-Effective Three-Dimensional Printing of Visibly Transparent Microchips within Minutes
Shallan, A. I., Smejkal, P., Corban, M., Guijt, R. M., & Breadmore, M. C. (2014) · Analytical Chemistry · doi:10.1021/ac4041857 · Cited by 501
Lightweight Mechanical Metamaterials with Tunable Negative Thermal Expansion
Wang, Q., Jackson, J. A., Ge, Q., Hopkins, J. B., Spadaccini, C. M., & Fang, N. X. (2016) · Physical Review Letters · doi:10.1103/physrevlett.117.175901 · Cited by 481
Self-citationLasers in additive manufacturing: A review
Lee, H., Lim, C. H. J., Low, M. J., Tham, N., Murukeshan, V. M., & Kim, Y.-J. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0037-7 · Cited by 449
Self-citationProjection micro stereolithography based 3D printing and its applications
Ge, Q., Li, Z., Wang, Z., Kowsari, K., Zhang, W., He, X., Zhou, J., & Fang, N. X. (2020) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ab8d9a · Cited by 444
Self-citationReprocessable thermosets for sustainable three-dimensional printing
Zhang, B., Kowsari, K., Serjouei, A., Dunn, M. L., & Ge, Q. (2018) · Nature Communications · doi:10.1038/s41467-018-04292-8 · Cited by 398
One-step volumetric additive manufacturing of complex polymer structures
Shusteff, M., Browar, A. E. M., Kelly, B. E., Henriksson, J., Weisgraber, T. H., Panas, R. M., Fang, N. X., & Spadaccini, C. M. (2017) · Science Advances · doi:10.1126/sciadv.aao5496 · Cited by 375
Self-citationThe recent development of vat photopolymerization: A review
Zhang, F., Zhu, L., Li, Z., Wang, S., Shi, J., Tang, W., Li, N., & Yang, J. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102423 · Cited by 375
In situ polymerization process: an essential design tool for lithium polymer batteries
Vijayakumar, V., Anothumakkool, B., Kurungot, S., Winter, M., & Nair, J. R. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03527k · Cited by 365
Soft Robotic Manipulation and Locomotion with a 3D Printed Electroactive Hydrogel
Han, D., Farino, C., Yang, C., Scott, T., Browe, D., Choi, W., Freeman, J. W., & Lee, H. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b04250 · Cited by 361
Self-citationHan, D., Morde, R. S., Mariani, S., La Mattina, A. A., Vignali, E., Yang, C., Barillaro, G., & Lee, H. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909197 · Cited by 360
Self-citationNielsen, A. V., Beauchamp, M. J., Nordin, G. P., & Woolley, A. T. (2020) · Annual Review of Analytical Chemistry · doi:10.1146/annurev-anchem-091619-102649 · Cited by 339
Additive Manufacturing of Batteries
Pang, Y., Cao, Y., Chu, Y., Liu, M., Snyder, K., MacKenzie, D., & Cao, C. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201906244 · Cited by 298
3D printed microfluidic devices with integrated valves
Rogers, C. I., Qaderi, K., Woolley, A. T., & Nordin, G. P. (2015) · Biomicrofluidics · doi:10.1063/1.4905840 · Cited by 297
Micro 3D Printing of a Temperature-Responsive Hydrogel Using Projection Micro-Stereolithography
Han, D., Lu, Z., Chester, S. A., & Lee, H. (2018) · Scientific Reports · doi:10.1038/s41598-018-20385-2 · Cited by 290
Self-citationPhotocontrolled RAFT polymerization: past, present, and future
Lee, Y., Boyer, C., & Kwon, M. S. (2023) · Chemical Society Reviews · doi:10.1039/d1cs00069a · Cited by 290
Rapid Assembly of Small Materials Building Blocks (Voxels) into Large Functional 3D Metamaterials
Hahn, V., Kiefer, P., Frenzel, T., Qu, J., Blasco, E., Barner‐Kowollik, C., & Wegener, M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201907795 · Cited by 285
4D printing reconfigurable, deployable and mechanically tunable metamaterials
Yang, C., Boorugu, M., Dopp, A., Ren, J., Martin, R., Han, D., Choi, W., & Lee, H. (2019) · Materials Horizons · doi:10.1039/c9mh00302a · Cited by 284
Self-citationNanomaterial Patterning in 3D Printing
Elder, B., Neupane, R., Tokita, E., Ghosh, U., Hales, S., & Kong, Y. L. (2020) · Advanced Materials · doi:10.1002/adma.201907142 · Cited by 265
A review on fabricating tissue scaffolds using vat photopolymerization
Chartrain, N. A., Williams, C. B., & Whittington, A. R. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.05.010 · Cited by 253
3D-printed microfluidic manipulation device integrated with magnetic array
Wu, J., Cui, Y., Xuan, S., & Gong, X. (2018) · Microfluidics and Nanofluidics · doi:10.1007/s10404-018-2123-8 · Cited by 20
Metadata
- Authors
- Zheng, X., Deotte, J., Alonso, M. P., Farquar, G. R., Weisgraber, T. H., Gemberling, S., Lee, H., Fang, N., & Spadaccini, C. M.
- Venue
- Review of Scientific Instruments
- Publisher
- AIP Publishing
- Published
- 2012-12-01
- Volume
- 83
- Issue
- 12
- Pages
- 125001-125001
- ISSN
- 0034-6748 (ISSN-L)
- 1089-7623
- OpenAlex
- W2048142600
- Cited by
- 267
- References
- 15
- FWCI
- 10.40
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.