The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Thermal conductance across β-Ga2O3-diamond van der Waals heterogeneous interfaces
Open accessAbstract
Because of its ultra-wide bandgap, high breakdown electric field, and large-area affordable substrates grown from the melt, β-Ga2O3 has attracted great attention recently for potential applications of power electronics. However, its thermal conductivity is significantly lower than those of other wide bandgap semiconductors, such as AlN, SiC, GaN, and diamond. To ensure reliable operation with minimal self-heating at high power, proper thermal management is even more essential for Ga2O3 devices. Similar to the past approaches aiming to alleviate self-heating in GaN high electron mobility transistors, a possible solution has been to integrate thin Ga2O3 membranes with diamond to fabricate Ga2O3-on-diamond lateral metal-semiconductor field-effect transistor or metal-oxide-semiconductor field-effect transistor devices by taking advantage of the ultra-high thermal conductivity of diamond. Even though the thermal boundary conductance (TBC) between wide bandgap semiconductor devices and a diamond substrate is of primary importance for heat dissipation in these devices, fundamental understanding of the Ga2O3-diamond thermal interface is still missing. In this work, we study the thermal transport across the interfaces of Ga2O3 exfoliated onto a single crystal diamond. The van der Waals bonded Ga2O3-diamond TBC is measured to be 17 −1.7/+2.0 MW/m2 K, which is comparable to the TBC of several physical-vapor-deposited metals on diamond. A Landauer approach is used to help understand phonon transport across a perfect Ga2O3-diamond interface, which in turn sheds light on the possible TBC one could achieve with an optimized interface. A reduced thermal conductivity of the Ga2O3 nano-membrane is also observed due to additional phonon-membrane boundary scattering. The impact of the Ga2O3–substrate TBC and substrate thermal conductivity on the thermal performance of a power device is modeled and discussed. Without loss of generality, this study is not only important for Ga2O3 power electronics applications which would not be realistic without a thermal management solution but also for the fundamental thermal science of heat transport across van der Waals bonded interfaces.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Commentary: The Materials Project: A materials genome approach to accelerating materials innovation
Jain, A., Ong, S. P., Hautier, G., Chen, W., Richards, W. D., Dacek, S., Cholia, S., Gunter, D., Skinner, D., Ceder, G., et al. (2013) · APL Materials · doi:10.1063/1.4812323 · Cited by 13,094
Analysis of heat flow in layered structures for time-domain thermoreflectance
Cahill, D. G. (2004) · Review of Scientific Instruments · doi:10.1063/1.1819431 · Cited by 1,543
Effects of chemical bonding on heat transport across interfaces
Losego, M. D., Grady, M. E., Sottos, N. R., Cahill, D. G., & Braun, P. V. (2012) · Nature Materials · doi:10.1038/nmat3303 · Cited by 701
Kapitza conductance and heat flow between solids at temperatures from 50 to 300 K
Stoner, R. J., & Maris, H. J. (1993) · Physical Review B · doi:10.1103/physrevb.48.16373 · Cited by 646
Thermal conductance of interfaces between highly dissimilar materials
Lyeo, H.-K., & Cahill, D. G. (2006) · Physical Review B · doi:10.1103/physrevb.73.144301 · Cited by 576
Interpreting picosecond acoustics in the case of low interface stiffness
Hohensee, G. T., Hsieh, W.-P., Losego, M. D., & Cahill, D. G. (2012) · Review of Scientific Instruments · doi:10.1063/1.4766957 · Cited by 87
Interfacial Thermal Conductance of Transfer‐Printed Metal Films
Oh, D., Kim, S., Rogers, J. A., Cahill, D. G., & Sinha, S. (2011) · Advanced Materials · doi:10.1002/adma.201102994 · Cited by 77
Cheng, Z., Bougher, T., Bai, T., Wang, S. Y., Li, C., Yates, L., Foley, B. M., Goorsky, M., Cola, B. A., Faili, F., et al. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b16812 · Cited by 76
Self-citationSchmidt, A. J. (2013) · Annual Review of Heat Transfer · doi:10.1615/annualrevheattransfer.v16.60 · Cited by 74
Cited by
Recent progress on the electronic structure, defect, and doping properties of Ga2O3
Zhang, J., Shi, J., Qi, D.-C., Chen, L., & Zhang, K. H. L. (2020) · APL Materials · doi:10.1063/1.5142999 · Cited by 596
Self-citationβ-Gallium oxide power electronics
Green, A. J., Speck, J., Xing, G., Moens, P., Allerstam, F., Gumaelius, K., Neyer, T., Arias-Purdue, A., Mehrotra, V., Kuramata, A., et al. (2022) · APL Materials · doi:10.1063/5.0060327 · Cited by 533
Self-citationHigh Thermal Boundary Conductance across Bonded Heterogeneous GaN—SiC Interfaces
Mu, F., Cheng, Z., Shi, J., Shin, S., Xu, B., Shiomi, J., Graham, S., & Suga, T. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b10106 · Cited by 159
Self-citationPfeifer, T. W., Schonfeld, H. B., Scott, E. A., Aller, H. T., Gaskins, J. T., Olson, D. H., Braun, J. L., Graham, S., & Hopkins, P. E. (2025) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-080423-010435 · Cited by 16
Self-citation
Metadata
- Authors
- Cheng, Z., Yates, L., Shi, J., Tadjer, M. J., Hobart, K. D., & Graham, S.
- Venue
- APL Materials
- Publisher
- AIP Publishing
- Published
- 2019-03-01
- Volume
- 7
- Issue
- 3
- ISSN
- 2166-532X (ISSN-L)
- OpenAlex
- W2963355303
- Cited by
- 164
- References
- 9
- FWCI
- 6.34
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermal conductance across β-Ga2O3-diamond van der Waals heterogeneous interfaces. https://app.cochat.ai/papers/10.1063/1.5089559
- The paper
- Cheng, Z., Yates, L., Shi, J., Tadjer, M. J., Hobart, K. D., & Graham, S. (2019). Thermal conductance across β-Ga2O3-diamond van der Waals heterogeneous interfaces. APL Materials. https://doi.org/10.1063/1.5089559
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.