The DOI matches its Crossref record; 81 of the 81 references it cites were found in a registry or an index.
Correlation of heat transport mechanism and structural properties of GaN high electron mobility transistors
Open accessAbstract
Grain sizes, impurities, and layer thicknesses in the nm-range affect the heat transport and, hence, hinder proper heat dissipation of GaN-based devices. To obtain a clear picture of heat dissipation, the mechanisms of heat transport must be linked to the structural properties of the nitride-based materials in the device. In this paper, a systematic investigation of the typical layers of GaN high-electron mobility transistor stacks was conducted by time-domain thermoreflectance analysis and Raman measurements. The analyzed layers are the AlN nucleation layer, the Al0.3Ga0.7N transition layer, the AlGaN/AlN superlattice, the C-doped GaN back-barrier, and the uid GaN layer. The results were interpreted using the Born–van Karman model, including the suppression function approach to describe the governing heat transport mechanisms. Investigation of this AlN nucleation layer showed that its phonon scattering is dominated by impurity and grain boundary scattering. The Al0.3Ga0.7N transition layer was shown to have a reduced thermal conductivity not only due to alloy scattering but also because of grain boundary scattering. The AlGaN/AlN superlattice showed a thermal conductivity lower than the Al0.3Ga0.7N transition layer, especially at higher temperatures (7.2 ± 0.2 W/mK vs 14.1 ± 0.4 W/mK at 300 °C). Caused by the enhanced AlGaN/AlN interface density, the thermal conductance was found to be 2 GW/m2 K. The AlGaN/AlN superlattice indicated an anisotropic thermal transport with a fa…
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In GaN-based structures, TBR at the substrate interface becomes a significant thermal bottleneck; aluminum nitride (AlN) buffer layers and interfacial defects increase TBR, and acoustic-phonon scattering exacerbates this at elevated temperatures [7,8].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [7]
In the citing paper
“In GaN-based structures, TBR at the substrate interface becomes a significant thermal bottleneck; aluminum nitride (AlN) buffer layers and interfacial defects increase TBR, and acoustic-phonon scattering exacerbates this at elevated temperatures [7,8].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [7]
In the citing paper
“In GaN-based structures, TBR at the substrate interface becomes a significant thermal bottleneck; aluminum nitride (AlN) buffer layers and interfacial defects increase TBR, and acoustic-phonon scattering exacerbates this at elevated temperatures [7,8].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [7]
In the citing paper
“three-dimensional (3D) simulations indicate that dopinglayer thickness strongly affects temperature beneath the gate [7,28,29].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [7]
In the citing paper
“In parallel, optimizing GaN layer thickness helps redistribute heat flux and relieve hotspots; three-dimensional (3D) simulations indicate that dopinglayer thickness strongly affects temperature beneath the gate [7,28,29].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [7]
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Model for Lattice Thermal Conductivity at Low Temperatures
Callaway, J. (1959) · Physical Review · doi:10.1103/physrev.113.1046 · Cited by 3,218
Thermal Conductivity of Silicon and Germanium from 3°K to the Melting Point
Glassbrenner, C. J., & Slack, G. A. (1964) · Physical Review · doi:10.1103/physrev.134.a1058 · Cited by 1,652
Analysis of heat flow in layered structures for time-domain thermoreflectance
Cahill, D. G. (2004) · Review of Scientific Instruments · doi:10.1063/1.1819431 · Cited by 1,543
Lattice Thermal Conductivity of Disordered Semiconductor Alloys at High Temperatures
Abeles, B. (1963) · Physical Review · doi:10.1103/physrev.131.1906 · Cited by 1,148
The intrinsic thermal conductivity of AIN
Slack, G. A., Tanzilli, R. A., Pohl, R. O., & Vandersande, J. W. (1987) · Journal of Physics and Chemistry of Solids · doi:10.1016/0022-3697(87)90153-3 · Cited by 1,009
Zur kinetischen Theorie der Wärmeleitung in Kristallen
Peierls, R. (1929) · Annalen der Physik · doi:10.1002/andp.19293950803 · Cited by 1,007
Phonon engineering through crystal chemistry
Toberer, E. S., Zevalkink, A., & Snyder, G. J. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm11754h · Cited by 945
Phonon dispersion and Raman scattering in hexagonal GaN and AlN
Davydov, V. Y., Kitaev, Y. E., Goncharuk, I. N., Smirnov, A. N., Graul, J., Semchinova, O., Uffmann, D., Smirnov, M. B., Mirgorodsky, A. P., & Evarestov, R. A. (1998) · Physical Review B · doi:10.1103/physrevb.58.12899 · Cited by 836
Morelli, D. T., Heremans, J. P., & Slack, G. A. (2002) · Physical Review B · doi:10.1103/physrevb.66.195304 · Cited by 628
del Alamo, J. A., & Joh, J. (2009) · Microelectronics Reliability · doi:10.1016/j.microrel.2009.07.003 · Cited by 502
Research works printed but not linked: 2
- 2017, Thermal Conductivity of Group-III Nitrides and Oxides
- Siemens (Ed.)
Cited by
Han, G., Kim, J., Park, S., & Bae, W. (2025) · Electronics · doi:10.3390/electronics14214193 · Cited by 34
“In GaN-based structures, TBR at the substrate interface becomes a significant thermal bottleneck; aluminum nitride (AlN) buffer layers and inter-facial defects increase TBR, and acoustic-phonon scattering exacerbates this at elevated temperatures [7,8].”
Sustainable Manufacturing and Applications of Wide-Bandgap Semiconductors—A Review
Yeboah, L., Oppong, P. A., Malik, A. A., Acheampong, P., Morgan, J., Addo, R., & Henyo, B. W. (2025) · Intelligent and sustainable manufacturing · doi:10.70322/ism.2025.10010 · Cited by 20
Leitgeb, V., Mitterhuber, L., Kosednar-Legenstein, B., Treidel, E. B., Brunner, F., & Kraker, E. (2025) · Journal of Applied Physics · doi:10.1063/5.0284946 · Cited by 7
Self-citationModeling the heat conductivity across bulk grain and grain boundaries in perovskite solar cells
Hajjiah, A. (2025) · Optical and Quantum Electronics · doi:10.1007/s11082-025-08149-5 · Cited by 5
“Therefore, the heat conductivity varies depending on the structural properties of the crystal such as grain sizes, number of grain boundaries impurities, and layer thicknesses in the nanometer range (Hogyoku et al. 2019; Mitterhuber et al. 2024 ).”
Ortiga-Fibla, J., Mitterhuber, L., Kosednar-Legenstein, B., Michler, S., Kaden, T., Kraker, E., Huber, C., & Cros, A. (2026) · Materials Science in Semiconductor Processing · doi:10.1016/j.mssp.2026.110574 · Cited by 1
Self-citationLeitgeb, V., Kosednar-Legenstein, B., Mitterhuber, L., Brunner, F., Treidel, E. B., & Kraker, E. (2025) · International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) · doi:10.1109/eurosime65125.2025.11006600
Self-citationLeitgeb, V., Mitterhuber, L., Kosednar-Legenstein, B., Brunner, F., Treidel, E. B., & Kraker, E. (2025) · European Microelectronics and Packaging Conference · doi:10.23919/empc63132.2025.11222541
“A detailed description of the model is provided in [40].”
Self-citationZhang, M., Jiang, P., & Yang, R. (2025) · Materials Today Physics · doi:10.1016/j.mtphys.2025.101987
Liu, W., Zhang, Y., Wang, Z., Su, K., Zhao, S., Xu, S., Zhang, J., Yao, Y., Wang, B., Dong, Y., et al. (2026) · Nanotechnology · doi:10.1088/1361-6528/ae46a5
Vertical GaN TG-MOSFET Power Device Model Considering Physical EffectsPreprint
Yang, W., Lian, H., Liu, W., Yang, F., Tang, X., & Bai, W. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.6395317
Physics-derived natural coordinates for fast uncertainty propagation in multilayer thermoreflectance
Chen, T., Wang, D., & Jiang, P. (2026) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2026.129653
Metadata
- Authors
- Mitterhuber, L., Kosednar-Legenstein, B., Vohra, A., Borga, M., Posthuma, N., & Kraker, E.
- Affiliations
- Materials Center Leoben (Austria) (AT)
- IMEC (BE)
- Corresponding author
- Mitterhuber, Lisa
- ORCID
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 2024-07-23
- Volume
- 136
- Issue
- 4
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W4400921525
- Cited by
- 11
- References
- 80
- Citations by year
- 2026: 4 · 2025: 7
- FWCI
- 1.59
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0/ (vor)
- creativecommons.org/licenses/by/4.0/ (tdm)
- Locations
- Journal of Applied Physics (publishedVersion, cc-by)
- Funders
- ECSEL Joint Undertaking (876659)
- Österreichische Forschungsförderungsgesellschaft (877534)
- Topics
- Physical Sciences › Physics and Astronomy › Condensed Matter Physics › GaN-based semiconductor devices and materials
- Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Keywords
- GaN high electron mobility transistors, heat transport, thermal conductivity, thermal management, AlN nucleation layer, grain boundary scattering, impurity scattering, anisotropic thermal transport, thermal resistance, compressive stress, time-domain thermoreflectance, Raman thermography, 3D thermal simulation, heat dissipation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.