Neural reparameterization for nonlocal metasurface topology optimization
Open accessThe DOI matches its Crossref record; 56 of the 58 references it cites were found in a registry or an index.
Abstract
Metasurfaces are emerging as a paradigm for performing all-optical, energy efficient analog computing and image processing in an ultra-compact form-factor. While various operations have been demonstrated with simple metasurface geometries, broadening the range of available processing outputs will require non-trivial and non-intuitive designs. Topology optimization (TO) is a powerful inverse design technique capable of designing such metasurfaces with significantly enhanced optical properties. The two most important design considerations are the quality of the optical performance and the minimum feature size in the resulting device. Larger features can reduce the mismatch between design and realized device performance, increasing fabrication speed and extending the scalability of the fabrication. Metasurface TO is typically performed on a pixel grid to determine the material distribution at each point. Here, we compare two pixel-based methods to neural-network based parameterizations, where the parameters of a neural-network are trained to output a metasurface design. We produce 150 different computational metasurface design tasks to compare the performance of each parameterization with regard to the performance and feature sizes. In comparison to the best pixel-based approach, a hybrid neural-network and pixel method produced designs with a median minimum feature size 2.8 times larger with only a 1.4 times increase in RMS error. Compared to a pixel method capable of producing similar critical dimensions, the optical performance of the hybrid approach is improved by 39%. Finally, as a proof of concept, we use this neural-network based parameterization to design an angular bandpass filter with relatively large critical dimensions and non-trivial performance.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Adam: A Method for Stochastic Optimization
Kingma, D. P., & Ba, J. (2014) · arXiv · doi:10.48550/arxiv.1412.6980 · Cited by 98,946
Flat optics with designer metasurfaces
Yu, N., & Capasso, F. (2014) · Nature Materials · doi:10.1038/nmat3839 · Cited by 5,984
Interspecimen Comparison of the Refractive Index of Fused Silica*,†
Malitson, I. H. (1965) · Journal of the Optical Society of America · doi:10.1364/josa.55.001205 · Cited by 4,216
Moharam, M. G., Gaylord, T. K., Grann, E. B., & Pommet, D. A. (1995) · Journal of the Optical Society of America A · doi:10.1364/josaa.12.001068 · Cited by 2,687
Rigorous coupled-wave analysis of planar-grating diffraction
Moharam, M. G., & Gaylord, T. K. (1981) · Journal of the Optical Society of America · doi:10.1364/josa.71.000811 · Cited by 2,248
On projection methods, convergence and robust formulations in topology optimization
Wang, F., Lazarov, B. S., & Sigmund, O. (2011) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-010-0602-y · Cited by 1,859
Inverse design in nanophotonics
Molesky, S., Lin, Z., Piggott, A. Y., Jin, W., Vucković, J., & Rodriguez, A. W. (2018) · Nature Photonics · doi:10.1038/s41566-018-0246-9 · Cited by 1,818
Topology optimization for nano‐photonics
Jensen, J. S., & Sigmund, O. (2011) · Laser & Photonics Reviews · doi:10.1002/lpor.201000014 · Cited by 767
Adjoint shape optimization applied to electromagnetic design
Lalau-Keraly, C. M., Bhargava, S., Miller, O. D., & Yablonovitch, E. (2013) · Optics Express · doi:10.1364/oe.21.021693 · Cited by 753
Physics-informed neural networks for inverse problems in nano-optics and metamaterials
Chen, Y., Lu, L., Karniadakis, G. E., & Dal Negro, L. (2020) · Optics Express · doi:10.1364/oe.384875 · Cited by 701
Large-Angle, Multifunctional Metagratings Based on Freeform Multimode Geometries
Sell, D., Yang, J., Doshay, S., Yang, R., & Fan, J. A. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b01082 · Cited by 594
Machine-learning reprogrammable metasurface imager
Li, L., Ruan, H., Liu, C., Li, Y., Shuang, Y., Alù, A., Qiu, C.-W., & Cui, T. J. (2019) · Nature Communications · doi:10.1038/s41467-019-09103-2 · Cited by 592
Electronic Structure of Amorphous Si from Photoemission and Optical Studies
Pierce, D. T., & Spicer, W. E. (1972) · Physical Review B · doi:10.1103/physrevb.5.3017 · Cited by 583
Roadmap for Optical Metasurfaces
Kuznetsov, A. I., Brongersma, M. L., Yao, J., Chen, M. K., Levy, U., Tsai, D. P., Zheludev, N. I., Faraon, A., Arbabi, A., Yu, N., et al. (2024) · ACS Photonics · doi:10.1021/acsphotonics.3c00457 · Cited by 420
A Deep Learning Approach for Objective-Driven All-Dielectric Metasurface Design
An, S., Fowler, C., Zheng, B., Shalaginov, M. Y., Tang, H., Li, H., Zhou, L., Ding, J., Agarwal, A. M., Rivero-Baleine, C., et al. (2019) · ACS Photonics · doi:10.1021/acsphotonics.9b00966 · Cited by 413
Free-Form Diffractive Metagrating Design Based on Generative Adversarial Networks
Jiang, J., Sell, D., Hoyer, S., Hickey, J., Yang, J., & Fan, J. A. (2019) · ACS Nano · doi:10.1021/acsnano.9b02371 · Cited by 390
High-efficiency, large-area, topology-optimized metasurfaces
Phan, T., Sell, D., Wang, E. W., Doshay, S., Edee, K., Yang, J., & Fan, J. A. (2019) · Light: Science & Applications · doi:10.1038/s41377-019-0159-5 · Cited by 357
Empowering Metasurfaces with Inverse Design: Principles and Applications
Li, Z., Pestourie, R., Lin, Z., Johnson, S. G., & Capasso, F. (2022) · ACS Photonics · doi:10.1021/acsphotonics.1c01850 · Cited by 283
Inverse design enables large-scale high-performance meta-optics reshaping virtual reality
Li, Z., Pestourie, R., Park, J.-S., Huang, Y.-W., Johnson, S. G., & Capasso, F. (2022) · Nature Communications · doi:10.1038/s41467-022-29973-3 · Cited by 280
Ji, W., Chang, J., Xu, H.-X., Gao, J. R., Gröblacher, S., Urbach, H. P., & Adam, A. J. L. (2023) · Light: Science & Applications · doi:10.1038/s41377-023-01218-y · Cited by 271
Inverse design in photonics by topology optimization: tutorial
Christiansen, R. E., & Sigmund, O. (2021) · Journal of the Optical Society of America B · doi:10.1364/josab.406048 · Cited by 262
Direct and Reliable Patterning of Plasmonic Nanostructures with Sub-10-nm Gaps
Duan, H., Hu, H., Kumar, K., Shen, Z., & Yang, J. K. W. (2011) · ACS Nano · doi:10.1021/nn2025868 · Cited by 261
TOuNN: Topology Optimization using Neural Networks
Chandrasekhar, A., & Suresh, K. (2021) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-020-02748-4 · Cited by 250
Advances in optical metalenses
Arbabi, A., & Faraon, A. (2023) · Nature Photonics · doi:10.1038/s41566-022-01108-6 · Cited by 209
Fruncillo, S., Su, X., Liu, H., & Wong, L. S. (2021) · ACS Sensors · doi:10.1021/acssensors.0c02704 · Cited by 184
Enabling smart vision with metasurfaces
Neshev, D. N., & Miroshnichenko, A. E. (2023) · Nature Photonics · doi:10.1038/s41566-022-01126-4 · Cited by 162
Neural reparameterization improves structural optimizationPreprint
Hoyer, S., Sohl‐Dickstein, J., & Greydanus, S. (2019) · arXiv (Cornell University) · doi:10.48550/arxiv.1909.04240 · Cited by 137
Inverse-Designed Photonics for Semiconductor Foundries
Piggott, A. Y., Ma, E. Y., Su, L., Ahn, G. H., Sapra, N. V., Vercruysse, D., Netherton, A. M., Khope, A. S. P., Bowers, J. E., & Vučković, J. (2020) · ACS Photonics · doi:10.1021/acsphotonics.9b01540 · Cited by 131
Inverse Design of Photonic Devices with Strict Foundry Fabrication Constraints
Schubert, M. F., Cheung, A. K. C., Williamson, I. A. D., Spyra, A., & Alexander, D. H. (2022) · ACS Photonics · doi:10.1021/acsphotonics.2c00313 · Cited by 130
Solving integral equations in free space with inverse-designed ultrathin optical metagratings
Cordaro, A., Edwards, B., Nikkhah, V., Alù, A., Engheta, N., & Polman, A. (2023) · Nature Nanotechnology · doi:10.1038/s41565-022-01297-9 · Cited by 130
Robust design of topology-optimized metasurfaces
Wang, E. W., Sell, D., Phan, T., & Fan, J. A. (2019) · Optical Materials Express · doi:10.1364/ome.9.000469 · Cited by 118
Neural-adjoint method for the inverse design of all-dielectric metasurfaces
Deng, Y. H., Ren, S., Fan, K., Malof, J. M., & Padilla, W. J. (2021) · Optics Express · doi:10.1364/oe.419138 · Cited by 116
Multichannel meta-imagers for accelerating machine vision
Zheng, H., Liu, Q., Kravchenko, I. I., Zhang, X., Huo, Y., & Valentine, J. G. (2024) · Nature Nanotechnology · doi:10.1038/s41565-023-01557-2 · Cited by 114
Optical Beam Steering Using Tunable Metasurfaces
Berini, P. (2022) · ACS Photonics · doi:10.1021/acsphotonics.2c00439 · Cited by 109
Edge Detection with Mie-Resonant Dielectric Metasurfaces
Komar, A., Aoni, R. A., Xu, L., Rahmani, M., Miroshnichenko, A. E., & Neshev, D. N. (2021) · ACS Photonics · doi:10.1021/acsphotonics.0c01874 · Cited by 101
Meta-device: advanced manufacturing
Leng, B., Zhang, Y., Tsai, D. P., & Xiao, S. (2024) · Light Advanced Manufacturing · doi:10.37188/lam.2024.005 · Cited by 99
Meta-optic accelerators for object classifiers
Zheng, H., Liu, Q., Zhou, Y., Kravchenko, I. I., Huo, Y., & Valentine, J. (2022) · Science Advances · doi:10.1126/sciadv.abo6410 · Cited by 98
Analysis of material selection on dielectric metasurface performance
Yang, J., & Fan, J. A. (2017) · Optics Express · doi:10.1364/oe.25.023899 · Cited by 91
Optical analog computing of spatial differentiation and edge detection with dielectric metasurfaces
Wan, L., Pan, D., Yang, S., Zhang, W., Potapov, A. A., Wu, X. W., Liu, W., Feng, T., & Li, Z. (2020) · Optics Letters · doi:10.1364/ol.386986 · Cited by 89
Neural network enabled metasurface design for phase manipulation
Jiang, L., Li, X., Wu, Q., Wang, L., & Gao, L. H. (2020) · Optics Express · doi:10.1364/oe.413079 · Cited by 79
Shape optimization for high efficiency metasurfaces: theory and implementation
Dainese, P., Marra, L., Cassara, D., Portes, A., Oh, J., Yang, J., Palmieri, A., Rodrigues, J. R., Dorrah, A. H., & Capasso, F. (2024) · Light: Science & Applications · doi:10.1038/s41377-024-01629-5 · Cited by 75
Sensitivity analysis and optimization of sub-wavelength optical gratings using adjoints
Niederberger, A. C. R., Fattal, D. A., Gauger, N. R., Fan, S., & Beausoleil, R. G. (2014) · Optics Express · doi:10.1364/oe.22.012971 · Cited by 71
Freeform metasurface color router for deep submicron pixel image sensors
Kim, C., Hong, J., Jang, J., et al. (2024) · Science Advances · doi:10.1126/sciadv.adn9000 · Cited by 67
Meta-optical and thin film devices for all-optical information processing
Wesemann, L., Davis, T. J., & Roberts, A. (2021) · Applied Physics Reviews · doi:10.1063/5.0048758 · Cited by 66
Self-citationChen, M., Jiang, J., & Fan, J. A. (2020) · ACS Photonics · doi:10.1021/acsphotonics.0c01202 · Cited by 65
Seong, J., Jeon, Y., Yang, Y., Badloe, T., & Rho, J. (2023) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-023-00580-x · Cited by 64
TORCWA: GPU-accelerated Fourier modal method and gradient-based optimization for metasurface design
Kim, C., & Lee, B. (2022) · Computer Physics Communications · doi:10.1016/j.cpc.2022.108552 · Cited by 54
Validation and characterization of algorithms and software for photonics inverse design
Chen, M., Christiansen, R. E., Fan, J. A., Işıklar, G., Jiang, J., Johnson, S. G., Ma, W., Miller, O. D., Oskooi, A. F., Schubert, M. F., et al. (2023) · Journal of the Optical Society of America B · doi:10.1364/josab.506412 · Cited by 51
Equivalent-circuit-intervened deep learning metasurface
Wu, B., Wang, G., Liu, K., Hu, G., & Xu, H. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.110725 · Cited by 44
Asymmetric metasurface photodetectors for single‐shot quantitative phase imaging
Liu, J., Wang, H., Li, Y., et al. (2023) · Nanophotonics · doi:10.1515/nanoph-2023-0354 · Cited by 29
Machine Learning for Engineering Meta‐Atoms with Tailored Multipolar Resonances
Li, W., Sedeh, H. B., Tsvetkov, D., Padilla, W. J., Ren, S., Malof, J. M., & Litchinitser, N. M. (2024) · Laser & Photonics Review · doi:10.1002/lpor.202300855 · Cited by 29
Physics-informed learning in artificial electromagnetic materials
Deng, Y., Fan, K., Jin, B., Malof, J. M., & Padilla, W. J. (2025) · Applied Physics Reviews · doi:10.1063/5.0232675 · Cited by 29
Inverse Design of Plasmonic Nanotweezers by Topology Optimization
Nelson, D., Kim, S., & Crozier, K. B. (2023) · ACS Photonics · doi:10.1021/acsphotonics.3c01019 · Cited by 22
Inverse-designed metasurfaces for multifunctional spatial frequency filtering
Pearson, P., Roberts, G. D., & Faraon, A. (2025) · Optica · doi:10.1364/optica.560985 · Cited by 22
Neural topology optimization: the good, the bad, and the ugly
Sanu, S. M., Aragón, A. M., & Bessa, M. A. (2025) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-025-04135-3 · Cited by 22
Inverse design of nonlinear metasurfaces for sum frequency generation
Li, N., Zhang, J., Neshev, D. N., & Sukhorukov, A. A. (2024) · Nanophotonics · doi:10.1515/nanoph-2024-0137 · Cited by 12
Research works printed but not linked: 1
- 1996, Introduction to Fourier Optics
Cited by
Full-space inverse-designed meta-optics for complex vector field shaping of intracavity landscapes
Xu, M., Sang, D., Pu, M., Gao, P., Zhao, B., Zheng, Y., 曾庆济, Chen, L., Zhang, F. B., Guo, Y., et al. (2026) · Light Science & Applications · doi:10.1038/s41377-026-02258-w · Cited by 6
“Future enhancements could explore neural reparameterization to implicitly enforce manufacturing constraints and improve feature size control during optimization 77 .”
Artificial intelligence empowered metasurface design
Wang, Y., Tang, X., Liu, C., & Ma, W. (2026) · Intelligent Opto-Electronics · doi:10.67704/ioe.2026.260007 · Cited by 1
Guest Editorial: Optical computing systems
Özcan, A., Lin, X., Angelis, C. D., et al. (2026) · APL Photonics · doi:10.1063/5.0333273
From intuition to optimization: a review of inverse design applied to optical nanotweezers
Nelson, D., Kim, S., & Crozier, K. B. (2026) · Reports on Progress in Physics · doi:10.1088/1361-6633/ae7f9a · Cited by 2
“Clark et al [146] used a convolutional neural network to design an angular bandpass filter.”
Metadata
- Authors
- Clark, L., Roberts, A., & Wesemann, L.
- Affiliations
- The University of Melbourne (AU)
- Corresponding author
- Clark, Lincoln
- Venue
- APL Photonics
- Publisher
- AIP Publishing
- Published
- 2025-10-01
- Volume
- 10
- Issue
- 10
- ISSN
- 2378-0967 (ISSN-L)
- OpenAlex
- W4415104676
- Cited by
- 4
- References
- 58
- Citations by year
- 2026: 4
- FWCI
- 0.64
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- APL Photonics (publishedVersion, cc-by)
- Minerva Access (University of Melbourne) (submittedVersion, cc-by)
- Funders
- Australian Research Council (CE200100010)
- Topics
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Metamaterials and Metasurfaces Applications
- Physical Sciences › Engineering › Civil and Structural Engineering › Topology Optimization in Engineering
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Antenna and Metasurface Technologies
- Keywords
- neural network parameterization, inverse design, minimum feature size, analog optical computing, all-optical image processing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.