The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
A nontransferring dry adhesive with hierarchical polymer nanohairs
Open accessAbstract
We present a simple yet robust method for fabricating angled, hierarchically patterned high-aspect-ratio polymer nanohairs to generate directionally sensitive dry adhesives. The slanted polymeric nanostructures were molded from an etched polySi substrate containing slanted nanoholes. An angled etching technique was developed to fabricate slanted nanoholes with flat tips by inserting an etch-stop layer of silicon dioxide. This unique etching method was equipped with a Faraday cage system to control the ion-incident angles in the conventional plasma etching system. The polymeric nanohairs were fabricated with tailored leaning angles, sizes, tip shapes, and hierarchical structures. As a result of controlled leaning angle and bulged flat top of the nanohairs, the replicated, slanted nanohairs showed excellent directional adhesion, exhibiting strong shear attachment (≈26 N/cm 2 in maximum) in the angled direction and easy detachment (≈2.2 N/cm 2) in the opposite direction, with a hysteresis value of ≈10. In addition to single scale nanohairs, monolithic, micro-nanoscale combined hierarchical hairs were also fabricated by using a 2-step UV-assisted molding technique. These hierarchical nanoscale patterns maintained their adhesive force even on a rough surface (roughness <20 μm) because of an increase in the contact area by the enhanced height of hierarchy, whereas simple nanohairs lost their adhesion strength. To demonstrate the potential applications of the adhesive patch, the dry adhesive was used to transport a large-area glass (47.5 × 37.5 cm 2, second-generation TFT-LCD glass), which could replace the current electrostatic transport/holding system with further optimization.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adhesive force of a single gecko foot-hair
Autumn, K., Liang, Y. A., Hsieh, S. T., Zesch, W., Chan, W. P., Kenny, T. W., Fearing, R., & Full, R. J. (2000) · Nature · doi:10.1038/35015073 · Cited by 2,758
A reversible wet/dry adhesive inspired by mussels and geckos
Lee, H., Lee, B. P., & Messersmith, P. B. (2007) · Nature · doi:10.1038/nature05968 · Cited by 2,043 · cited 1×
“For example, mussels generate specialized adhesive proteins, allowing for strong adhesion to wet surfaces, which is not easily achievable with man-made adhesives (2).”
BackgroundEvidence for van der Waals adhesion in gecko setae
Autumn, K., Sitti, M., Liang, Y. A., Peattie, A. M., Hansen, W. R., Sponberg, S., Kenny, T. W., Fearing, R., Israelachvili, J. N., & Full, R. J. (2002) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.192252799 · Cited by 1,949
Microfabricated adhesive mimicking gecko foot-hair
Geim, A. K., Dubonos, S. V., Grigorieva, I. V., Novoselov, K. S., Zhukov, A. A., & Shapoval, S. Y. (2003) · Nature Materials · doi:10.1038/nmat917 · Cited by 1,329
From micro to nano contacts in biological attachment devices
Arzt, E., Gorb, S., & Spolenak, R. (2003) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1534701100 · Cited by 1,149
Thin-film peeling-the elastic term
Kendall, K. (1975) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/8/13/005 · Cited by 875
Carbon Nanotube Arrays with Strong Shear Binding-On and Easy Normal Lifting-Off
Qu, L., Dai, L., Stone, M., Xia, Z., & Wang, Z. L. (2008) · Science · doi:10.1126/science.1159503 · Cited by 745
Frictional adhesion: a new angle on gecko attachment
Autumn, K., Dittmore, A., Santos, D., Spenko, M., & Cutkosky, M. (2006) · Journal of Experimental Biology · doi:10.1242/jeb.02486 · Cited by 651
A biodegradable and biocompatible gecko-inspired tissue adhesive
Mahdavi, A., Ferreira, L., Sundback, C., Nichol, J. W., Chan, E. P., Carter, D. J. D., Bettinger, C. J., Patanavanich, S., Chignozha, L., Ben-Joseph, E., et al. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0712117105 · Cited by 554
Gecko‐Inspired Directional and Controllable Adhesion
Murphy, M. P., Aksak, B., & Sitti, M. (2009) · Small · doi:10.1002/smll.200801161 · Cited by 463
Carbon nanotube-based synthetic gecko tapes
Ge, L., Sethi, S., Ci, L., Ajayan, P. M., & Dhinojwala, A. (2007) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0703505104 · Cited by 441
Adhesion of Bioinspired Micropatterned Surfaces: Effects of Pillar Radius, Aspect Ratio, and Preload
Greiner, C., del Campo, A., & Arzt, E. (2007) · Langmuir · doi:10.1021/la0633987 · Cited by 435
Constraints on Microcontact Printing Imposed by Stamp Deformation
Hui, C. Y., Jagota, A., Lin, Y. Y., & Kramer, E. J. (2002) · Langmuir · doi:10.1021/la0113567 · Cited by 426
Design of biomimetic fibrillar interfaces: 1. Making contact
Glassmaker, N. J., Jagota, A., Hui, C.-Y., & Kim, J. (2004) · Journal of The Royal Society Interface · doi:10.1098/rsif.2004.0004 · Cited by 400
Yao, H., & Gao, H. (2006) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2006.01.002 · Cited by 346
Effective elastic modulus of isolated gecko setal arrays
Autumn, K., Majidi, C., Groff, R. E., Dittmore, A., & Fearing, R. (2006) · Journal of Experimental Biology · doi:10.1242/jeb.02469 · Cited by 319
Bioinspired Surfaces with Switchable Adhesion
Reddy, S., Arzt, E., & del Campo, A. (2007) · Advanced Materials · doi:10.1002/adma.200700733 · Cited by 317
Adhesion of Biologically Inspired Vertical and Angled Polymer Microfiber Arrays
Aksak, B., Murphy, M. P., & Sitti, M. (2007) · Langmuir · doi:10.1021/la062697t · Cited by 314
An Ultraviolet-Curable Mold for Sub-100-nm Lithography
Choi, S.-J., Yoo, P. J., Baek, S. J., Kim, T. W., & Lee, H. H. (2004) · Journal of the American Chemical Society · doi:10.1021/ja048972k · Cited by 294
Adhesion design maps for bio-inspired attachment systems
Spolenak, R., Gorb, S., & Arzt, E. (2005) · Acta Biomaterialia · doi:10.1016/j.actbio.2004.08.004 · Cited by 278
Patterned Surfaces with Pillars with Controlled 3D Tip Geometry Mimicking Bioattachment Devices
del Campo, A., Greiner, C., Álvarez, I., & Arzt, E. (2007) · Advanced Materials · doi:10.1002/adma.200602476 · Cited by 234
A Gecko‐Inspired Reversible Adhesive
Northen, M. T., Greiner, C., Arzt, E., & Turner, K. L. (2008) · Advanced Materials · doi:10.1002/adma.200801340 · Cited by 221
Packham, D. E. (2005) · CERN Document Server (European Organization for Nuclear Research) · Cited by 213
High Friction from a Stiff Polymer Using Microfiber Arrays
Majidi, C., Groff, R. E., Maeno, Y., Schubert, B., Baek, S., Bush, B., Maboudian, R., Gravish, N., Wilkinson, M., Autumn, K., et al. (2006) · Physical Review Letters · doi:10.1103/physrevlett.97.076103 · Cited by 176
Directional adhesion for climbing: theoretical and practical considerations
Santos, D., Spenko, M. J., Parness, A. J., Kim, S., & Cutkosky, M. R. (2007) · Journal of Adhesion Science and Technology · doi:10.1163/156856107782328399 · Cited by 157
Bhushan, B., Peressadko, A., & Kim, T. (2006) · Journal of Adhesion Science and Technology · doi:10.1163/156856106778666408 · Cited by 113
Effect of backing layer thickness on adhesion of single-level elastomer fiber arrays
Kim, S., Sitti, M., Hui, C., Long, R., & Jagota, A. (2007) · Applied Physics Letters · doi:10.1063/1.2801371 · Cited by 83
Observation of optimal gecko's adhesion on nanorough surfaces
Pugno, N. M., & Lepore, E. (2008) · Biosystems · doi:10.1016/j.biosystems.2008.06.009 · Cited by 68
High aspect ratio Bosch etching of sub-0.25μm trenches for hyperintegration applications
Wang, X., Zeng, W., Lu, G., Russo, O. L., & Eisenbraun, E. T. (2007) · Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena · doi:10.1116/1.2756554 · Cited by 31
Cited by
Bio-inspired design of multiscale structures for function integration
Liu, K., & Jiang, L. (2011) · Nano Today · doi:10.1016/j.nantod.2011.02.002 · Cited by 760
A wet-tolerant adhesive patch inspired by protuberances in suction cups of octopi
Baik, S., Kim, D. W., Park, Y., Lee, T.-J., Ho Bhang, S., & Pang, C. (2017) · Nature · doi:10.1038/nature22382 · Cited by 585
Gecko‐Inspired Surfaces: A Path to Strong and Reversible Dry Adhesives
Boesel, L. F., Greiner, C., Arzt, E., & del Campo, A. (2010) · Advanced Materials · doi:10.1002/adma.200903200 · Cited by 472
A Soft Robotic Gripper With Gecko-Inspired Adhesive
Glick, P., Suresh, S. A., Ruffatto, D., Cutkosky, M., Tolley, M. T., & Parness, A. (2018) · IEEE Robotics and Automation Letters · doi:10.1109/lra.2018.2792688 · Cited by 381
Rational Design and Enhanced Biocompatibility of a Dry Adhesive Medical Skin Patch
Kwak, M. K., Jeong, H., & Suh, K. Y. (2011) · Advanced Materials · doi:10.1002/adma.201101694 · Cited by 342
Self-citation
Metadata
- Authors
- Jeong, H. E., Lee, J.-K., Kim, H. N., Moon, S. H., & Suh, K. Y.
- Venue
- Proceedings of the National Academy of Sciences
- Published
- 2009-04-07
- Volume
- 106
- Issue
- 14
- Pages
- 5639-5644
- ISSN
- 0027-8424 (ISSN-L)
- 1091-6490
- OpenAlex
- W2160670107
- Cited by
- 558
- References
- 29
- FWCI
- 70.34
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.