The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Thermochemical resistive switching: materials, mechanisms, and scaling projections
Abstract
In this article, resistive switching based on the thermochemical mechanism (TCM) is reviewed. This mechanism is observed when thermochemical redox processes dominate over electrochemical processes. As the switching is based on thermal effects, it is inherently unipolar, i.e., the transitions between the resistive states can be induced by the same bias voltage polarity. NiO has emerged as a “model material” for resistive switching based on the TCM effect and the discussion of the resistance states and the switching processes are focused on this material with the appropriate electrodes, mainly Pt. Unipolar switching is unambiguously filamentary. Conductive filaments are formed during the electroforming process needed prior to memory switching. The SET operation is interpreted as a sequence of threshold switching and subsequent Joule heating which triggers local redox reactions in which oxygen deficient NiO and, if the amount of released oxygen exceeds a certain amount, also metallic Ni will form. The RESET transition can be described as a thermally activated solid-state process resulting in a local decrease of the metallic Ni species. In terms of operation and reliability, a trade-off between RESET current reduction and retention was experimentally found. This is due to the decreasing long-term stability of the filaments with decreasing size. In addition, the scaling projection of a TCM-based memory technology with NiO is directly related to RESET currents and the availability of appropriate select devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges
Waser, R., Dittmann, R., Staikov, G., & Szot, K. (2009) · Advanced Materials · doi:10.1002/adma.200900375 · Cited by 5,080
Self-citationNanoionics-based resistive switching memories
Waser, R., & Aono, M. (2007) · Nature Materials · doi:10.1038/nmat2023 · Cited by 4,923
Self-citationAtomic structure of conducting nanofilaments in TiO2 resistive switching memory
Kwon, D.-H., Kim, K. M., Jang, J. H., Jeon, J. M., Lee, M. H., Kim, G. H., Li, X.-S., Park, G.-S., Lee, B., Han, S., et al. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2009.456 · Cited by 2,092
Electrical phenomena in amorphous oxide films
Dearnaley, G., Stoneham, A. M., & Morgan, D. V. (1970) · Reports on Progress in Physics · doi:10.1088/0034-4885/33/3/306 · Cited by 731
Observation of electric-field induced Ni filament channels in polycrystalline NiOx film
Park, G.-S., Li, X.-S., Kim, D.-C., Jung, R.-J., Lee, M.-J., & Seo, S. (2007) · Applied Physics Letters · doi:10.1063/1.2813617 · Cited by 238
Voltage-time dilemma of pure electronic mechanisms in resistive switching memory cells
Schroeder, H., Zhirnov, V. V., Cavin, R. K., & Waser, R. (2010) · Journal of Applied Physics · doi:10.1063/1.3319591 · Cited by 108
Self-citation
Cited by
Memristive devices for computing
Yang, J. J., Strukov, D. B., & Stewart, D. R. (2013) · Nature Nanotechnology · doi:10.1038/nnano.2012.240 · Cited by 3,885
Resistive switching memories based on metal oxides: mechanisms, reliability and scaling
Ielmini, D. (2016) · Semiconductor Science and Technology · doi:10.1088/0268-1242/31/6/063002 · Cited by 905
Self-citationA comprehensive review on emerging artificial neuromorphic devices
Zhu, J., Zhang, T., Yang, Y., & Huang, R. (2020) · Applied Physics Reviews · doi:10.1063/1.5118217 · Cited by 758
Ielmini, D. (2011) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2011.2167513 · Cited by 551
Self-citationResistive switching phenomena: A review of statistical physics approaches
Lee, J. S., Lee, S., & Noh, T. W. (2015) · Applied Physics Reviews · doi:10.1063/1.4929512 · Cited by 463
Metadata
- Authors
- Ielmini, D., Bruchhaus, R., & Waser, R.
- Venue
- Phase Transitions
- Publisher
- Informa UK Limited
- Published
- 2011-07
- Volume
- 84
- Issue
- 7
- Pages
- 570-602
- ISSN
- 0141-1594 (ISSN-L)
- 1029-0338
- OpenAlex
- W2066271063
- Cited by
- 192
- References
- 6
- FWCI
- 8.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermochemical resistive switching: materials, mechanisms, and scaling projections. https://app.cochat.ai/papers/10.1080/01411594.2011.561478
- The paper
- Ielmini, D., Bruchhaus, R., & Waser, R. (2011). Thermochemical resistive switching: materials, mechanisms, and scaling projections. Phase Transitions. https://doi.org/10.1080/01411594.2011.561478
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.