Use of the polycation polyethyleneimine to improve the physical properties of alginate–hyaluronic acid hydrogel during fabrication of tissue repair scaffolds
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Recently alginate-based tissue repair scaffolds fabricated using 3D printing techniques have been extensively examined for use in tissue engineering applications. However, their physical and mechanical properties are unfavorable for many tissue engineering applications because these properties are poorly controlled during the fabrication process. Some improvement of alginate gel properties can be realized by addition of hyaluronic acid (HA), and this may also improve the ability of cells to interact with the gel. Here, we report improvement of the physical properties of alginate-HA gel scaffolds by the addition of the polycation polyethyleneimine (PEI) during the fabrication process in order to stabilize alginate molecular structure through the formation of a polyelectrolyte complex. We find that PEI has a significant beneficial influence on alginate-HA scaffold physical properties, including a reduction in the degree of gel swelling, a reduction in scaffold degradation rate, and an increase in the Young's modulus of the gel. Further study shows that fabrication of alginate-HA gels with PEI increases the encapsulation efficiency of bovine serum albumin, a model protein, and reduces the subsequent initial protein release rate. However, it was also found that survival of Schwann cells or ATDC-5 chondrogenic cells encapsulated during the scaffold fabrication process was modestly reduced with increasing PEI concentration. This study illustrates that the use of PEI during scaffold fabrication by plotting can provide an effective means to control alginate-based scaffold properties for tissue engineering applications, but that the many effects of PEI must be balanced for optimal outcomes in different situations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Alginate hydrogels as synthetic extracellular matrix materials
Rowley, J. A., Madlambayan, G., & Mooney, D. J. (1999) · Biomaterials · doi:10.1016/s0142-9612(98)00107-0 · Cited by 2,342
Hyaluronan: from extracellular glue to pericellular cue
Toole, B. P. (2004) · Nature Reviews Cancer · doi:10.1038/nrc1391 · Cited by 2,125
Hyaluronan: its nature, distribution, functions and turnover.
Fraser, J. R. E., Laurent, T. C., & Laurent, U. B. G. (1997) · Journal of Internal Medicine · doi:10.1046/j.1365-2796.1997.00170.x · Cited by 2,031 · cited 1×
“Hyaluronic acid (HA) is a glycosaminoglycan with repeating disaccharide units of glucuronic acid and N-acetylglucosamine residues.[9] It has various applications in tissue engineering.”
Background25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901 · cited 1×
“For effective tissue regeneration using tissue repair scaffolds, porosity and the presence of interconnected spaces is of great importance.[46] Porous alginate hydrogels provide a more favorable environment for cell proliferation due to enhanced mass transfer of nutrients and oxygen.”
Background
Cited by
Three-dimensional (3D) printed scaffold and material selection for bone repair
Zhang, L., Yang, G., Johnson, B. N., & Jia, X. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.11.039 · Cited by 865
Unagolla, J. M., & Jayasuriya, A. C. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2019.100479 · Cited by 544
The application of hyaluronic acid in bone regeneration
Zhai, P., Peng, X., Li, B., Liu, Y., Sun, H., & Li, X. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.10.169 · Cited by 438
Biomaterials / bioinks and extrusion bioprinting
Chen, X. B., Fazel Anvari-Yazdi, A., Duan, X., Zimmerling, A., Gharraei, R., Sharma, N. K., Sweilem, S., & Ning, L. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.06.006 · Cited by 244
“Food and Drug Administration (FDA) approval for use in some products [35,39,94,101].”
BackgroundApplication of Extrusion-Based Hydrogel Bioprinting for Cartilage Tissue Engineering
You, F., Eames, B. F., & Chen, X. (2017) · International Journal of Molecular Sciences · doi:10.3390/ijms18071597 · Cited by 178
“Physical (thermal [69,70] ionic [71] and photo [72]) crosslinking include reversible entangled chains, hydrogen bonding, etc.”
Background
Metadata
- Authors
- Rajaram, A., Schreyer, D. J., & Chen, D. X. B.
- Venue
- Journal of Biomaterials Science, Polymer Edition
- Publisher
- Informa UK Limited
- Published
- 2015-03-02
- Volume
- 26
- Issue
- 7
- Pages
- 433-445
- ISSN
- 0920-5063 (ISSN-L)
- 1568-5624
- OpenAlex
- W2050394298
- Cited by
- 77
- References
- 4
- FWCI
- 2.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Use of the polycation polyethyleneimine to improve the physical properties of alginate–hyaluronic acid hydrogel during fabrication of tissue repair scaffolds. https://app.cochat.ai/papers/10.1080/09205063.2015.1016383
- The paper
- Rajaram, A., Schreyer, D. J., & Chen, D. X. B. (2015). Use of the polycation polyethyleneimine to improve the physical properties of alginate–hyaluronic acid hydrogel during fabrication of tissue repair scaffolds. Journal of Biomaterials Science, Polymer Edition. https://doi.org/10.1080/09205063.2015.1016383
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.