The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Extracting Embodied Energy Paths from Input–Output Tables: Towards an Input–Output-based Hybrid Energy Analysis Method
Abstract
Embodied energy is defined as the energy consumed in all activities necessary to support a process, including upstream processes. The Leontief inverse input–output (IO) matrix gives results that are practically complete, because of the aggregation of direct and indirect requirements, but which are also unreliable, because of inherent assumptions. Although accurate for the system boundary considered, process analysis results are incomplete relative to the pure IO system boundary. Attempts to combine process and IO analysis tend to be based on process analysis data. The system boundary is still significantly incomplete—although not as incomplete as for pure process analysis. An IO-based hybrid analysis technique that requires the extraction of particular paths from the direct IO matrix has been developed. The potential for embodied energy paths to be used as the basis for a hybrid analysis of the Australian residential building sector is discussed. The results indicate that less than three-quarters of the total embodied energy of this sector is likely to be able to be validated, because of the complexity of the embodied energy paths.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Input-output analysis foundations and extensions
Miller, R. E., & Blair, P. D. (2009) · Cited by 5,083
Leontief, W. W. (1951) · Scientific American · doi:10.1038/scientificamerican1051-15 · Cited by 1,492
Rasmussen, P. N., Leontief, W., & Rasmussen, P. N. (1967) · The Swedish Journal of Economics · doi:10.2307/3439124 · Cited by 1,025
Bullard, C. W., Penner, P. S., & Pilati, D. A. (1978) · Resources and Energy · doi:10.1016/0165-0572(78)90008-7 · Cited by 533
Handbook of industrial energy analysis
Boustead, I., & Hancock, G. F. (1979) · CERN Document Server (European Organization for Nuclear Research) · Cited by 456
Using Input-Output Analysis to Estimate Economy-wide Discharges
LAVE, L. B. (1995) · Environmental Science & Technology · doi:10.1021/es00009a748 · Cited by 369
Using input-output analysis to estimate economy-wide discharges
Lave, L. B., Cobas-Flores, E., Hendrickson, C. T., & McMichael, F. C. (1995) · Environmental Science & Technology · doi:10.1021/es00009a003 · Cited by 103
The estimation of energy consumption and amount of pollutants due to the construction of buildings
Tatsuo, O. K. A., Suzuki, M., & Konnya, T. (1993) · Energy and Buildings · doi:10.1016/0378-7788(93)90016-n · Cited by 77
Handbook of energy use for building construction
Stein, R. G., Stein, C., Buckley, M., & Green, M. (1980) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/5190332 · Cited by 28
Assessing the Energy Conservation Benefits of Historic Preservation: Methods and Examples
Davis, M. P. (1980) · Bulletin of the Association for Preservation Technology · doi:10.2307/1493825 · Cited by 14
Cited by
Comparative Environmental Life Cycle Assessment of Conventional and Electric Vehicles
Hawkins, T. R., Singh, B., Majeau‐Bettez, G., & Strømman, A. H. (2013) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2012.00532.x · Cited by 1,670
System Boundary Selection in Life-Cycle Inventories Using Hybrid Approaches
Suh, S., Lenzen, M., Treloar, G. J., Hondo, H., Horvath, A., Huppes, G., Jolliet, O., Klann, U., Krewitt, W., Moriguchi, Y., et al. (2004) · Environmental Science & Technology · doi:10.1021/es0263745 · Cited by 1,025
Self-citationErrors in Conventional and Input‐Output—based Life—Cycle Inventories
Lenzen, M. (2000) · Journal of Industrial Ecology · doi:10.1162/10881980052541981 · Cited by 757
Methods for Life Cycle Inventory of a product
Suh, S., & Huppes, G. (2005) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2003.04.001 · Cited by 710
Shared producer and consumer responsibility — Theory and practice
Lenzen, M., Murray, J., Sack, F., & Wiedmann, T. (2007) · Ecological Economics · doi:10.1016/j.ecolecon.2006.05.018 · Cited by 656
INPUT–OUTPUT ANALYSIS AND CARBON FOOTPRINTING: AN OVERVIEW OF APPLICATIONS
Minx, J. C., Wiedmann, T., Wood, R., Peters, G. P., Lenzen, M., Owen, A., Scott, K., Barrett, J., Hubacek, K., Baiocchi, G., et al. (2009) · Economic Systems Research · doi:10.1080/09535310903541298 · Cited by 542
Need for an embodied energy measurement protocol for buildings: A review paper
Dixit, M. K., Fernández-Solís, J. L., Lavy, S., & Culp, C. H. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.03.021 · Cited by 469
Life cycle greenhouse gas emissions and energy analysis of prefabricated reusable building modules
Aye, L., Ngo, T., Crawford, R. H., Gammampila, R., & Mendis, P. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2011.11.049 · Cited by 466
Life cycle assessment (LCA) of building refurbishment: A literature review
Vilches, A., Garcia-Martinez, A., & Sanchez-Montañes, B. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2016.11.042 · Cited by 449
Carbon accounting for sustainability and management. Status quo and challenges
Schaltegger, S., & Csutora, M. (2012) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.06.024 · Cited by 408
Wiedmann, T., Wilting, H. C., Lenzen, M., Lutter, S., & Palm, V. (2011) · Ecological Economics · doi:10.1016/j.ecolecon.2011.06.014 · Cited by 405
Life-cycle energy analysis of buildings: a case study
Fay, R., Treloar, G., & Iyer-Raniga, U. (2000) · Building Research & Information · doi:10.1080/096132100369073 · Cited by 402
Self-citationChastas, P., Theodosiou, T., & Bikas, D. (2016) · Building and Environment · doi:10.1016/j.buildenv.2016.05.040 · Cited by 400
Nässén, J., Holmberg, J., Wadeskog, A., & Nyman, M. (2007) · Energy · doi:10.1016/j.energy.2007.01.002 · Cited by 384
COMPARISON OF BOTTOM-UP AND TOP-DOWN APPROACHES TO CALCULATING THE WATER FOOTPRINTS OF NATIONS
Feng, K., Chapagain, A., Suh, S., Pfister, S., & Hubacek, K. (2011) · Economic Systems Research · doi:10.1080/09535314.2011.638276 · Cited by 354
Hybrid life cycle inventory methods – A review
Crawford, R. H., Bontinck, P.-A., Stephan, A., Wiedmann, T., & Yu, M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.176 · Cited by 343
Chen, S., & Chen, B. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.10.055 · Cited by 342
Validation of a hybrid life-cycle inventory analysis method
Crawford, R. H. (2008) · Journal of Environmental Management · doi:10.1016/j.jenvman.2007.03.024 · Cited by 340
Functions, commodities and environmental impacts in an ecological–economic model
Suh, S. (2004) · Ecological Economics · doi:10.1016/j.ecolecon.2003.10.013 · Cited by 307
Life-cycle energy analysis of prefabricated building components: an input–output-based hybrid model
Hong, J., Shen, G. Q., Mao, C., Li, Z., & Li, K. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.10.030 · Cited by 304
Lenzen, M., Wood, R., & Wiedmann, T. (2010) · Economic Systems Research · doi:10.1080/09535311003661226 · Cited by 304
Energy requirements of Sydney households
Lenzen, M., Dey, C., & Foran, B. (2004) · Ecological Economics · doi:10.1016/j.ecolecon.2004.01.019 · Cited by 300
Majeau-Bettez, G., Strømman, A. H., & Hertwich, E. G. (2011) · Environmental Science & Technology · doi:10.1021/es201308x · Cited by 286
Tushar, Q., Bhuiyan, M. A., Zhang, G., & Maqsood, T. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.125622 · Cited by 152
Omar, W. M. S. W., Doh, J.-H., Panuwatwanich, K., & Miller, D. (2014) · Sustainable Cities and Society · doi:10.1016/j.scs.2013.06.002 · Cited by 139
Hybrid life cycle assessment (LCA) will likely yield more accurate results than process-based LCA
Pomponi, F., & Lenzen, M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.12.119 · Cited by 129
Stephan, A., & Crawford, R. H. (2016) · Energy · doi:10.1016/j.energy.2016.10.038 · Cited by 102
Hybrid life-cycle assessment for robust, best-practice carbon accounting
Kennelly, C., Berners-Lee, M., & Hewitt, C. N. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.09.231 · Cited by 57
Metadata
- Authors
- Treloar, G. J.
- Venue
- Economic Systems Research
- Publisher
- Informa UK Limited
- Published
- 1997-12
- Volume
- 9
- Issue
- 4
- Pages
- 375-391
- ISSN
- 0953-5314 (ISSN-L)
- 1469-5758
- OpenAlex
- W1977809150
- Cited by
- 447
- References
- 10
- FWCI
- 5.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.