3D bioprinting of hepatoma cells and application with microfluidics for pharmacodynamic test of Metuzumab
Open accessThe DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
Constructing in vitro drug models with a higher degree of bionics is considered to be an important approach to improve the effectiveness of existing drug screening models. 3D printing, co-culture and microfluidics are important methods that commonly used. This study combined the advantages of the three methods. A 3D co-culture microfluidic model with controllable hepatoma cluster size was constructed, and applied to pharmacodynamic tests of a new anti-CD147 monoclonal antibody, Metuzumab. In the phase of cell preparation, hepatoma cells in the new model were found to proliferate faster than common in vitro 3D models fabricated by cell printing only. The hepatoma cells were also found less affected by the increase of drug dosage in migration performance, proliferation performance and protein expression level in the new model compared with 2D models. These results are in line with those obtained from animal experiments and clinical trials of similar anti-CD147 antibody drugs. In view of the special mechanism of antibody drugs, a modified model was built by adding peripheral blood mononuclear cells into the new model as effector cells, porting traditional antibody-dependent cell-mediated cytotoxicity (ADCC) test to a co-culture 3D microfluidic microenvironment. The results showed that ADCC exhibited higher effectiveness in the microfluidic model than in 3D printing models under the same dose of drug treatment. The new model was proved constructive and it provided a valuable reference for complex in vitro hepatoma model studies and antibody drug screening researches.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Modeling Tissue Morphogenesis and Cancer in 3D
Yamada, K. M., & Cukierman, E. (2007) · Cell · doi:10.1016/j.cell.2007.08.006 · Cited by 1,751
Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs
Bertassoni, L. E., Cecconi, M., Manoharan, V., Nikkhah, M., Hjortnaes, J., Cristino, A. L., Barabaschi, G., Demarchi, D., Dokmeci, M. R., Yang, Y., et al. (2014) · Lab Chip · doi:10.1039/c4lc00030g · Cited by 944
Biofabrication: reappraising the definition of an evolving field
Groll, J., Boland, T., Blunk, T., Burdick, J. A., Cho, D.-W., Dalton, P. D., Derby, B., Forgacs, G., Li, Q., Mironov, V. A., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/013001 · Cited by 731
A liver-on-a-chip platform with bioprinted hepatic spheroids
Bhise, N. S., Manoharan, V., Massa, S., Tamayol, A., Ghaderi, M., Miscuglio, M., Lang, Q., Shrike Zhang, Y., Shin, S. R., Calzone, G., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/014101 · Cited by 615
Loessner, D., Stok, K. S., Lutolf, M. P., Hutmacher, D. W., Clements, J. A., & Rizzi, S. C. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.07.064 · Cited by 602
Microfluidic system for formation of PC-3 prostate cancer co-culture spheroids
Hsiao, A. Y., Torisawa, Y.-S., Tung, Y.-C., Sud, S., Taichman, R. S., Pienta, K. J., & Takayama, S. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.02.047 · Cited by 323
Invasive three-dimensional organotypic neoplasia from multiple normal human epithelia
Ridky, T. W., Chow, J. M., Wong, D. J., & Khavari, P. A. (2010) · Nature Medicine · doi:10.1038/nm.2265 · Cited by 217
Cited by
3D bioprinting for reconstituting the cancer microenvironment
Datta, P., Dey, M., Ataie, Z., Unutmaz, D., & Ozbolat, I. T. (2020) · npj Precision Oncology · doi:10.1038/s41698-020-0121-2 · Cited by 304
Barbosa, M. A. G., Xavier, C. P. R., Pereira, R. F., Petrikaitė, V., & Vasconcelos, M. H. (2021) · Cancers · doi:10.3390/cancers14010190 · Cited by 285
“Other Analysis: IF, MMP Zymography Assay Kit, FACS, Caspase 3/7 activity assay, CellTraceTM CFSE Cell Proliferation Kit [69,70]”
MethodCell Culture Based in vitro Test Systems for Anticancer Drug Screening
Kitaeva, K. V., Rutland, C. S., Rizvanov, A. A., & Solovyeva, V. V. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.00322 · Cited by 142
Advances in bioengineering pancreatic tumor-stroma physiomimetic Biomodels
Monteiro, M. V., Ferreira, L. P., Rocha, M., Gaspar, V. M., & Mano, J. F. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121653 · Cited by 19
Metadata
- Authors
- Li, Y., Zhang, T., Pang, Y., Li, L., Chen, Z.-N., & Sun, W.
- Venue
- Biofabrication
- Publisher
- IOP Publishing
- Published
- 2019-06-26
- Volume
- 11
- Issue
- 3
- Pages
- 034102
- ISSN
- 1758-5082 (ISSN-L)
- 1758-5090
- OpenAlex
- W2947280116
- Cited by
- 59
- References
- 8
- FWCI
- 2.57
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D bioprinting of hepatoma cells and application with microfluidics for pharmacodynamic test of Metuzumab. https://app.cochat.ai/papers/10.1088/1758-5090/ab256c
- The paper
- Li, Y., Zhang, T., Pang, Y., Li, L., Chen, Z.-N., & Sun, W. (2019). 3D bioprinting of hepatoma cells and application with microfluidics for pharmacodynamic test of Metuzumab. Biofabrication. https://doi.org/10.1088/1758-5090/ab256c
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.