Process-induced cell damage: pneumatic versus screw-driven bioprinting
Open accessThe DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
During the bioprinting processes that employ either pneumatic or screw-driven mechanisms, living cells are subject to process-induced forces, which may cause cell injury or damage. However, the similarities and differences between these two mechanisms have not been discovered and documented in terms of process-induced forces and cell damage. In this paper, we examined the process-induced forces, including hydrostatic pressure, shear stress, extensional stress, and tensile/compressive forces that the cells experienced during the bioprinting processes by means of these two mechanisms; we also experimentally investigated the process-induced cell damage (featured by the rupture of the cell membrane) under various printing conditions or factors, including the volumetric flow rates, cell types, bioink solutions, needle types and sizes, and printing head-movement speeds. On this basis, we correlated the percent of cell damage to the process-induced forces, which were considered mainly responsible for the rupture of the cell membrane. Our results illustrate that compared to the pneumatic bioprinting process, the screw-driven bioprinting process generally induces more cell damage, varying with the printing conditions. This study, for the first time, discovers the similarities and differences between the pneumatic and screw-driven bioprinting processes and further demonstrates their merits and demerits for bioprinting in terms of printing-process control, process-induced forces, and cell damage.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dynamic properties of mammalian skeletal muscles.
Close, R. I. (1972) · Physiological Reviews · doi:10.1152/physrev.1972.52.1.129 · Cited by 1,890
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing
Lind, J. U., Busbee, T. A., Valentine, A. D., Pasqualini, F. S., Yuan, H., Yadid, M., Park, S.-J., Kotikian, A., Nesmith, A. P., Campbell, P. H., et al. (2017) · Nature Materials · doi:10.1038/nmat4782 · Cited by 863
Extrusion Bioprinting of Scaffolds for Tissue Engineering Applications
Chen, D. X. B. (2019) · doi:10.1007/978-3-030-03460-3 · Cited by 101
Self-citation
Cited by
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
The rheology of direct and suspended extrusion bioprinting
Cooke, M. E., & Rosenzweig, D. H. (2021) · APL Bioengineering · doi:10.1063/5.0031475 · Cited by 284
Gelatin methacryloyl hydrogel, from standardization, performance, to biomedical application
He, J., Sun, Y., Gao, Q., He, C., Yao, K., Wang, T., Xie, M., Yu, K., Nie, J., Chen, Y., et al. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202300395 · Cited by 275
Biomaterials / bioinks and extrusion bioprinting
Chen, X. B., Fazel Anvari-Yazdi, A., Duan, X., Zimmerling, A., Gharraei, R., Sharma, N. K., Sweilem, S., & Ning, L. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.06.006 · Cited by 244
Self-citation
Metadata
- Authors
- Ning, L., Yang, B., Mohabatpour, F., Betancourt, N., Sarker, M., Papagerakis, P., & Chen, X.
- Venue
- Biofabrication
- Publisher
- IOP Publishing
- Published
- 2020-02-13
- Volume
- 12
- Issue
- 2
- Pages
- 025011
- ISSN
- 1758-5082 (ISSN-L)
- 1758-5090
- OpenAlex
- W2993577907
- Cited by
- 91
- References
- 4
- FWCI
- 3.07
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Process-induced cell damage: pneumatic versus screw-driven bioprinting. https://app.cochat.ai/papers/10.1088/1758-5090/ab5f53
- The paper
- Ning, L., Yang, B., Mohabatpour, F., Betancourt, N., Sarker, M., Papagerakis, P., & Chen, X. (2020). Process-induced cell damage: pneumatic versus screw-driven bioprinting. Biofabrication. https://doi.org/10.1088/1758-5090/ab5f53
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.