Large Shape Transforming 4D Auxetic Structures
The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
Three-dimensional (3D) printing of active materials is a rapidly growing research area over the last few years. Numerous works have shown potential to revolutionize the field of four-dimensional (4D) printing and active self-deploying structures. Conventional manufacturing technologies restrict the geometric complexity of active structures. 3D printing allows the fabrication of complex active structures with no assembly required. In this study, we propose active 3D printed auxetic meta-materials that are capable of achieving area changes up to 200%. With these meta-materials, we design geometrically complex active structures that can be programmed into versatile shapes and recover their original shape given an external stimulus. We simulate the proposed meta-materials based on thermoviscoelastic material properties obtained by experimental characterization. A reduced beam model is constructed to predict forces and deformations of complex active structures. Excellent correlation is found between finite element simulation and experimental data from a 3-point bending test. Rectilinear tiling of the proposed meta-materials achieves the desired shape transformation. To demonstrate versatile programming, a selected meta-material is tiled into a complex contour, programmed into an arbitrary shape, and recovers as predicted. Simulation results verify this behavior. Such programmability in conjunction with 3D printing may be further exploited for applications such as biomedical devices, civil structures, and aerospace.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Zhao, Q., Qi, H. J., & Xie, T. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.04.001 · Cited by 1,409
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
Active printed materials for complex self-evolving deformations
Raviv, D., Zhao, W., McKnelly, C., Papadopoulou, A., Kadambi, A., Shi, B., Hirsch, S., Dikovsky, D., Zyracki, M., Olguin, C., et al. (2014) · Scientific Reports · doi:10.1038/srep07422 · Cited by 568
Multi-shape active composites by 3D printing of digital shape memory polymers
Wu, J., Yuan, C., Ding, Z., Isakov, M., Mao, Y., Wang, T., Dunn, M. L., & Qi, H. J. (2016) · Scientific Reports · doi:10.1038/srep24224 · Cited by 399
3D printed reversible shape changing components with stimuli responsive materials
Mao, Y., Ding, Z., Yuan, C., Ai, S., Isakov, M., Wu, J., Wang, T., Dunn, M. L., & Qi, H. J. (2016) · Scientific Reports · doi:10.1038/srep24761 · Cited by 348
Cited by
Mechanical design and multifunctional applications of chiral mechanical metamaterials: A review
Wu, W., Hu, W., Qian, G., Liao, H., Xu, X., & Berto, F. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107950 · Cited by 733
Harnessing bistability for directional propulsion of soft, untethered robots
Chen, T., Bilal, O. R., Shea, K., & Daraio, C. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1800386115 · Cited by 427
Self-citationRyan, K. R., Down, M. P., & Banks, C. E. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126162 · Cited by 338
Advances in 3D/4D printing of mechanical metamaterials: From manufacturing to applications
Zhou, X., Ren, L., Song, Z., Li, G., Zhang, J., Li, B., Wu, Q., Li, W., Ren, L., & Liu, Q. (2023) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2023.110585 · Cited by 277
Mechanical Models, Structures, and Applications of Shape-Memory Polymers and Their Composites
Xin, X., Liu, L., Liu, Y., & Leng, J. (2019) · Acta Mechanica Solida Sinica · doi:10.1007/s10338-019-00103-9 · Cited by 115
Metadata
- Authors
- Wagner, M., Chen, T., & Shea, K.
- Venue
- 3D Printing and Additive Manufacturing
- Publisher
- SAGE Publications
- Published
- 2017-09
- Volume
- 4
- Issue
- 3
- Pages
- 133-142
- ISSN
- 2329-7662 (ISSN-L)
- 2329-7670
- OpenAlex
- W2751346439
- Cited by
- 92
- References
- 7
- FWCI
- 8.44
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.