Degradation of Electrospun Nanofiber Scaffold by Short Wave Length Ultraviolet Radiation Treatment and Its Potential Applications in Tissue Engineering
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Development in the field of tissue engineering has brought much attention in the fabrication and preparation of scaffold with biodegradable synthetic polymer nanofibers. Electrospun biodegradable polymeric nanofibers are increasingly being used to fabricate scaffolds for tissue engineering applications as they provide high surface area-to-volume ratio and possess high porosity. One common way to sterilize polymeric nanofiber scaffolds is 254-nm ultraviolet (UV) irradiation. In this study, we aim to evaluate the effects of UV radiation on the degradation in polymeric nanofibers, and then capitalize on UV-induced degradation and UV photolithography in polymeric nanofiber scaffolds for tissue engineering applications. Poly(D,L-lactic-co-glycolic) acid (PLGA, 75:25) and poly(L-lactide-co-epsilon-caprolactone) [P(LLA-CL), 70:30] nanofibrous meshes were produced by electrospinning. The nanofibers were irradiated by commercial germicide UV (lambda=254 nm) lamp for different intervals. We found that UV sterilization induced significant degradation of nanofiber. At 1 h UV irradiation, the average molecular weight of PLGA and P(LLA-CL) nanofibers were reduced by 46% and 35%, respectively, with corresponding reduction in the tensile strength of 26% for PLGA and 28% for P(LLA-CL). Hence, precautions may have to be taken into consideration when sterilizing polymeric nanofibers by UV treatment. UV-induced degradation on nanofibers was applied to fabrication of a three-dimensional (3D) tissue engineering scaffold by UV photolithography. Masked exposure to UV could generate patterned holes (d=100 microm) on the nanofibrous mesh. Cell culture study showed that smooth muscle cells were able to migrate into the holes. This method can be used to fabricate a 3D nanofibrous scaffold with micropores.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Exploring and Engineering the Cell Surface Interface
Stevens, M. M., & George, J. H. (2005) · Science · doi:10.1126/science.1106587 · Cited by 2,607
Electrospinning for tissue engineering scaffolds
Lannutti, J., Reneker, D., Ma, T., Tomasko, D., & Farson, D. (2007) · Materials Science and Engineering: C · doi:10.1016/j.msec.2006.05.019 · Cited by 693 · cited 2×
“49,50 One big drawback of nanofiber application is that the pore size of nanofiber is too small to let cells migrate through, 45 and some approaches were made to address the problem, such as combination of microfibers and nanofibers, 51 salt leaching, 50 and low-temperature electrospinning.”
Keun Kwon, I., Kidoaki, S., & Matsuda, T. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.10.007 · Cited by 607
Cited by
Bone tissue engineering: A review in bone biomimetics and drug delivery strategies
Porter, J. R., Ruckh, T. T., & Popat, K. C. (2009) · Biotechnology Progress · doi:10.1002/btpr.246 · Cited by 809
The Potential of Cellulose Nanocrystals in Tissue Engineering Strategies
Domingues, R. M. A., Gomes, M. E., & Reis, R. L. (2014) · Biomacromolecules · doi:10.1021/bm500524s · Cited by 509
Polymer nanofibrous structures: Fabrication, biofunctionalization, and cell interactions
Beachley, V., & Wen, X. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.03.003 · Cited by 490
Electrospun Fibrous Scaffolds for Tissue Engineering: Viewpoints on Architecture and Fabrication
Jun, I., Han, H.-S., Edwards, J., & Jeon, H. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms19030745 · Cited by 467
Wang, Z., Cui, Y., Wang, J., Yang, X., Wu, Y., Wang, K., Gao, X., Li, D., Li, Y., Zheng, X.-L., et al. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.03.078 · Cited by 435
Improved Cellular Infiltration in Electrospun Fiber via Engineered Porosity
Nam, J., Huang, Y., Agarwal, S., & Lannutti, J. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0306 · Cited by 414
Design Challenges in Polymeric Scaffolds for Tissue Engineering
Echeverria Molina, M. I., Malollari, K. G., & Komvopoulos, K. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.617141 · Cited by 397
“, ultrasound, heat, and radiation) encountered during scaffold sterilization, patient therapy, and scaffold surface modification can also influence the rate of scaffold degradation by indirectly affecting the aging, crosslinking, morphology, hydrophilicity, and physical, chemical, and mechanical properties of the poly…”
BackgroundHuman endothelial cell growth on mussel-inspired nanofiber scaffold for vascular tissue engineering
Ku, S. H., & Park, C. B. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.08.071 · Cited by 396
Sterilization techniques for biodegradable scaffolds in tissue engineering applications
Dai, Z., Ronholm, J., Tian, Y., Sethi, B., & Cao, X. (2016) · Journal of Tissue Engineering · doi:10.1177/2041731416648810 · Cited by 355
Electrospun fibers for tissue engineering, drug delivery, and wound dressing
Goh, Y.-F., Shakir, I., & Hussain, R. (2013) · Journal of Materials Science · doi:10.1007/s10853-013-7145-8 · Cited by 318
Scaffold degradation in bone tissue engineering: An overview
Tajvar, S., Hadjizadeh, A., & Samandari, S. S. (2023) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2023.105599 · Cited by 291
Control of Scaffold Degradation in Tissue Engineering: A Review
Zhang, H., Zhou, L., & Zhang, W. (2014) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2013.0452 · Cited by 290
Fabrication of Large Pores in Electrospun Nanofibrous Scaffolds for Cellular Infiltration: A Review
Zhong, S., Zhang, Y., & Lim, C. T. (2012) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2011.0390 · Cited by 210
Vascular tissue engineering: from in vitro to in situ
Li, S., Sengupta, D., & Chien, S. (2014) · WIREs Systems Biology and Medicine · doi:10.1002/wsbm.1246 · Cited by 164
Metadata
- Authors
- Yixiang, D., Yong, T., Liao, S., Chan, C. K., & Ramakrishna, S.
- Venue
- Tissue Engineering Part A
- Publisher
- SAGE Publications
- Published
- 2008-08
- Volume
- 14
- Issue
- 8
- Pages
- 1321-1329
- ISSN
- 1937-3341 (ISSN-L)
- 1937-335X
- OpenAlex
- W2077018680
- Cited by
- 107
- References
- 3
- FWCI
- 2.39
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.