Insulation failure prediction in AC machines using line-neutral voltages
The DOI matches its Crossref record.
Abstract
This paper presents a novel technique to detect insulation failure in polyphase AC machines. The machine must be star connected and have the neutral accessible. The mathematical theory of the technique is provided and supported by an experimental validation-turn faults in the stator of an induction machine are detected from the algebraic sum of the three instantaneous line-neutral voltages. However, this voltage sum contains undesirable frequencies that decrease the sensitivity of the scheme. Bandpass filtering the voltage sum (around the fundamental) optimizes sensitivity by removing the harmonics that arise from core saturation, slot harmonics, etc. The design of the scheme makes it practically immune to false alarms attributable to varying load conditions, operating temperatures and source voltage perturbations. It is shown that this technique is simpler in both theory and practice than other techniques based upon accurate calculations of sequence voltages and currents. The simplicity of this technique permits a low-cost implementation to flag a turn fault within a few cycles of the fundamental machine excitation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A Survey of Condition Monitoring and Protection Methods for Medium-Voltage Induction Motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2090839 · Cited by 706
Self-citationA Review of Stator Fault Monitoring Techniques of Induction Motors
Siddique, A., Yadava, G. S., & Singh, B. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2004.837304 · Cited by 591
A survey of condition monitoring and protection methods for medium voltage induction motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2009) · 2009 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2009.5316083 · Cited by 524
Self-citationGrubic, S., Aller, J. M., Lu, B., & Habetler, T. G. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2004665 · Cited by 490
Self-citationInduction machine drive condition monitoring and diagnostic research—a survey
Singh, G. K., & Ahmed Saleh Al Kazzaz, S. (2003) · Electric Power Systems Research · doi:10.1016/s0378-7796(02)00172-4 · Cited by 362
Da, Y., Shi, X., & Krishnamurthy, M. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2227808 · Cited by 303
A Survey of Methods for Detection of Stator-Related Faults in Induction Machines
Tallam, R. M., Lee, S. B., Stone, G. C., Kliman, G. B., Yoo, J., Habetler, T. G., & Harley, R. G. (2007) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2007.900448 · Cited by 301
Self-citationUrresty, J.-C., Riba, J.-R., Delgado, M., & Romeral, L. (2012) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2011.2176127 · Cited by 181
“The simplest alternative is to collect data from the machine terminal voltages and currents [7].”
BackgroundMethodDemagnetization Fault Indexes in Permanent Magnet Synchronous Motors—An Overview
Faiz, J., & Nejadi-Koti, H. (2016) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2015.2480379 · Cited by 119
“and stator winding fault of poly-phase machines [25], [26].”
BackgroundDa, Y., Shi, X., & Krishnamurthy, M. (2011) · 2011 IEEE Vehicle Power and Propulsion Conference · doi:10.1109/vppc.2011.6043248 · Cited by 96
“Negative/zero current [28], negative/zero impedance [29], or negative/zero voltage [30] are utilized as indicators for fault detection.”
Comprehensive review on inter‐turn fault indexes in permanent magnet motors
Faiz, J., Nejadi‐Koti, H., & Valipour, Z. (2017) · IET Electric Power Applications · doi:10.1049/iet-epa.2016.0196 · Cited by 86
Urresty, J.-C., Riba, J.-R., & Romeral, L. (2012) · Electric Power Systems Research · doi:10.1016/j.epsr.2012.02.012 · Cited by 73
An effective method for detection of stator fault in PMSM with 1D-LBP
Mi̇naz, M. R. (2020) · ISA Transactions · doi:10.1016/j.isatra.2020.07.013 · Cited by 23
Metadata
- Authors
- Cash, M. A., Habetler, T. G., & Kliman, G. B.
- Venue
- IEEE Transactions on Industry Applications
- Published
- 1998
- Volume
- 34
- Issue
- 6
- Pages
- 1234-1239
- ISSN
- 0093-9994 (ISSN-L)
- OpenAlex
- W2097362303
- Cited by
- 148
- References
- 0
- FWCI
- 3.42
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.