The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Steady-state analysis of an interleaved boost converter with coupled inductors
Abstract
Boost converters are widely used as power-factor corrected preregulators. In high-power applications, interleaved operation of two or more boost converters has been proposed to increase the output power and to reduce the output ripple. A major design criterion then is to ensure equal current sharing among the parallel converters. In this paper, a converter consisting of two interleaved and intercoupled boost converter cells is proposed and investigated. The boost converter cells have very good current sharing characteristics even in the presence of relatively large duty cycle mismatch. In addition, it can be designed to have small input current ripple and zero boost-rectifier reverse-recovery loss. The operating principle, steady-state analysis, and comparison with the conventional boost converter are presented. Simulation and experimental results are also given.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High efficiency power factor correction using interleaving techniques
Miwa, B. A., Otten, D. M., & Schlecht, M. E. (2003) · [Proceedings] APEC '92 Seventh Annual Applied Power Electronics Conference and Exposition · doi:10.1109/apec.1992.228361 · Cited by 363
Power-factor correction with interleaved boost converters in continuous-inductor-current mode
Balogh, L., & Redl, R. (2002) · Proceedings Eighth Annual Applied Power Electronics Conference and Exposition, · doi:10.1109/apec.1993.290634 · Cited by 209
Elmore, M. (2002) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.1996.500436 · Cited by 119
Kolar, J. W., Kamath, G. R., Mohan, N., & ZACH, F. C. (2002) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.1995.474808 · Cited by 84
A new improved boost converter with ripple free input current using coupled inductors
Cheng, D. K. W. (1998) · International Conference on Power Electronics and Variable Speed Drives (PEVD) · doi:10.1049/cp:19980592 · Cited by 40
Self-citation
Cited by
Forouzesh, M., Siwakoti, Y. P., Gorji, S. A., Blaabjerg, F., & Lehman, B. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2652318 · Cited by 2,123
A Review of Three-Phase Improved Power Quality AC–DC Converters
Singh, B., Singh, B. N., Chandra, A., Al-Haddad, K., Pandey, A., & Kothari, D. P. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2004.825341 · Cited by 1,728
Review of Nonisolated High-Step-Up DC/DC Converters in Photovoltaic Grid-Connected Applications
Li, W., & He, X. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2049715 · Cited by 1,423
A review of single-phase improved power quality ac~dc converters
Singh, B., Singh, B. N., Chandra, A., Al-Haddad, K., Pandey, A., & Kothari, D. P. (2003) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.817609 · Cited by 1,297
Safayatullah, M., Elrais, M. T., Ghosh, S., Rezaii, R., & Batarseh, I. (2022) · IEEE Access · doi:10.1109/access.2022.3166935 · Cited by 615
Survey on non‐isolated high‐voltage step‐up dc–dc topologies based on the boost converter
Tofoli, F. L., Pereira, D. D. C., Josias de Paula, W., & Oliveira Júnior, D. D. S. (2015) · IET Power Electronics · doi:10.1049/iet-pel.2014.0605 · Cited by 591
Jang, Y., & Jovanovic, M. M. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.900502 · Cited by 352
Electric Vehicles Charging Technology Review and Optimal Size Estimation
Brenna, M., Foiadelli, F., Leone, C., & Longo, M. (2020) · Journal of Electrical Engineering & Technology · doi:10.1007/s42835-020-00547-x · Cited by 298
Analysis of integrated boost-flyback step-up converter
Liang, T. J., & Tseng, K. C. (2005) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20045003 · Cited by 263
Comparative analysis of bidirectional three-level DC–DC converter for automotive applications
Dusmez, S., Hasanzadeh, A., & Khaligh, A. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2336605 · Cited by 204
A review on unidirectional converters for on-board chargers in electric vehicle
Vijayakumar, S., & Sudhakar, N. (2022) · Frontiers in Energy Research · doi:10.3389/fenrg.2022.1011681 · Cited by 26
“converters in parallel, operating 180° out of the phase (Lee et al., 2000).”
BackgroundComparison of boost-based MPPT topologies for space applications
Garcia, O., Alou, P., Oliver, J. A., Diaz, D., Meneses, D., Cobos, J. A., Soto, A., Lapena, E., & Rancano, J. (2013) · IEEE Transactions on Aerospace and Electronic Systems · doi:10.1109/taes.2013.6494401 · Cited by 21
“By shifting the driving signal of the transistors 180±, the filters are drastically reduced [9, 10].”
Background
Metadata
- Authors
- Lee, P.-W., Lee, Y.-S., Cheng, D. K. W., & Liu, X.-C.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2000
- Volume
- 47
- Issue
- 4
- Pages
- 787-795
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2135620883
- Cited by
- 498
- References
- 5
- FWCI
- 3.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.