The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Surface micromachining for microelectromechanical systems
Abstract
Surface micromachining is characterized by the fabrication of micromechanical structures from deposited thin films. Originally employed for integrated circuits, films composed of materials such as low-pressure chemical-vapor-deposition polycrystalline silicon, silicon nitride, and silicon dioxides can be sequentially deposited and selectively removed to build or "machine" three-dimensional structures whose functionality typically requires that they be freed from the planar substrate. Although the process to accomplish this fabrication dates from the 1960's, its rapid extension over the past few years and its application to batch fabrication of micromechanisms and of monolithic microelectromechanical systems (MEMS) make a thorough review of surface micromachining appropriate at this time. Four central issues of consequence to the MEMS technologist are: (i) the understanding and control of the material properties of microstructural films, such as polycrystalline silicon, (ii) the release of the microstructure, for example, by wet etching silicon dioxide sacrificial films, followed by its drying and surface passivation, (iii) the constraints defined by the combination of micromachining and integrated-circuit technologies when fabricating monolithic sensor devices, and (iv) the methods, materials, and practices used when packaging the completed device. Last, recent developments of hinged structures for postrelease assembly, high-aspect-ratio fabrication of molded parts from deposited thin films, and the advent of deep anisotropic silicon etching hold promise to extend markedly the capabilities of surface-micromachining technologies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Silicon as a mechanical material
Petersen, K. E. (1982) · Proceedings of the IEEE · doi:10.1109/proc.1982.12331 · Cited by 2,902
Critical Review: Adhesion in surface micromechanical structures
Maboudian, R., & Howe, R. T. (1997) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.589247 · Cited by 841
Self-citationLaterally Driven Polysilicon Resonant Microstructures
Tang, W. C., Nguyen, T.-C. H., & Howe, R. T. (1989) · Sensors and Actuators · doi:10.1016/0250-6874(89)87098-2 · Cited by 743
Self-citationBulk micromachining of silicon
Kovacs, G. T. A., Maluf, N. I., & Petersen, K. E. (1998) · Proceedings of the IEEE · doi:10.1109/5.704259 · Cited by 733
(1995) · Choice Reviews Online · doi:10.5860/choice.32-5109 · Cited by 573
OSATAKE, H., & INOUÉ, T. (1988) · Archives of Histology and Cytology · doi:10.1679/aohc.51.53 · Cited by 409
Guckel, H., Randazzo, T., & Burns, D. W. (1985) · Journal of Applied Physics · doi:10.1063/1.334435 · Cited by 294
Pister, K. S. J., Judy, M. W., Burgett, S. R., & Fearing, R. S. (1992) · Sensors and Actuators A: Physical · doi:10.1016/0924-4247(92)80172-y · Cited by 279
Laminated high-aspect-ratio microstructures in a conventional CMOS process
Fedder, G. K., Santhanam, S., Reed, M. L., Eagle, S. C., Guillou, D. F., Lu, M. S.-C., & Carley, L. R. (1996) · Sensors and Actuators A: Physical · doi:10.1016/s0924-4247(97)80100-8 · Cited by 250
Vacuum packaging for microsensors by glass-silicon anodic bonding
Henmi, H., Shoji, S., Shoji, Y., Yoshimi, K., & Esashi, M. (1994) · Sensors and Actuators A: Physical · doi:10.1016/0924-4247(94)80003-0 · Cited by 230
An Integrated Force-balanced Capacitive Accelerometer For Low-G Applications
Chau, K. H.-L., Lewis, S. R., Zhao, Y., Howe, R. T., Bart, S. F., & Marcheselli, R. G. (2005) · Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95 · doi:10.1109/sensor.1995.717294 · Cited by 189
Self-citationSilicon nitride single-layer x-ray mask
Sekimoto, M., Yoshihara, H., & Ohkubo, T. (1982) · Journal of Vacuum Science and Technology · doi:10.1116/1.571854 · Cited by 188
Thermophysical properties of low-residual stress, Silicon-rich, LPCVD silicon nitride films
Mastrangelo, C. H., Tai, Y., & Muller, R. S. (1990) · Sensors and Actuators A Physical · doi:10.1016/0924-4247(90)87046-l · Cited by 156
Self-citationEmbedded micromechanical devices for the monolithic integration of MEMS and CMOS
Sandia National Labs., A., Smith, J., USDOE, W., Montague, S., Sniegowski, J., & McWhorter, P. J. (1995) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/114489 · Cited by 150
Monk, D. J., Soane, D. S., & Howe, R. T. (1993) · Thin Solid Films · doi:10.1016/0040-6090(93)90752-b · Cited by 139
Self-citationEmbedded micromechanical devices for the monolithic integration of MEMS with CMOS
Smith, J. H., Montague, S., Sniegowski, J. J., Murray, J. R., & McWhorter, P. J. (2002) · Technical digest - International Electron Devices Meeting/Technical digest · doi:10.1109/iedm.1995.499295 · Cited by 122
Process technology for the modular integration of CMOS and polysilicon microstructures
Bustillo, J. M., Fedder, G. K., Nguyen, C. T. ‐., & Howe, R. T. (1994) · Microsystem Technologies · doi:10.1007/bf01367758 · Cited by 79
Self-citationEncapsulated micro mechanical sensors
Esashi, M. (1994) · Microsystem Technologies · doi:10.1007/bf01367754 · Cited by 70
Flexible, dry-released process for aluminum electrostatic actuators
Storment, C. W., Borkholder, D. A., Westerlind, V. A., Suh, J. W., Maluf, N. I., & Kovacs, G. T. A. (1994) · Journal of Microelectromechanical Systems · doi:10.1109/84.311558 · Cited by 62
Permeable Polysilicon Etch-access Windows For Microshell Fabrication
Lebouitz, K., Howe, R. T., & Pisano, A. P. (2005) · International Conference on Solid-State Sensors, Actuators and Microsystems · doi:10.1109/sensor.1995.717149 · Cited by 43
Self-citationSacrificial aluminum etching for CMOS microstructures
Paul, O., Westberg, D., Hornung, M. R., Ziebart, V., & Baltes, H. (2002) · IEEE International Conference on Micro Electro Mechanical Systems (MEMS) · doi:10.1109/memsys.1997.581918 · Cited by 20
Micromachined dual input axis rate gyroscope
Juneau, T. N. (1997) · PhDT · Cited by 18
Tensile Testing Of Epitaxial Silicon Films
Cunningham, S. J., Suwito, W., & Read, D. (2005) · International Conference on Solid-State Sensors, Actuators and Microsystems · doi:10.1109/sensor.1995.721753 · Cited by 13
Cited by
Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication
Cumpston, B. H., Ananthavel, S. P., Barlow, S., Dyer, D. L., Ehrlich, J. E., Erskine, L. L., Heikal, A. A., Kuebler, S. M., Lee, I.-Y. S., McCord-Maughon, D., et al. (1999) · Nature · doi:10.1038/17989 · Cited by 2,232
Microelectromechanical systems (MEMS): fabrication, design and applications
Judy, J. W. (2001) · Smart Materials and Structures · doi:10.1088/0964-1726/10/6/301 · Cited by 828
An Introduction to Microelectromechanical Systems Engineering
Maluf, N. (2002) · Measurement Science and Technology · doi:10.1088/0957-0233/13/2/701 · Cited by 694
Piezoelectric MEMS sensors: state-of-the-art and perspectives
Tadigadapa, S., & Mateti, K. (2009) · Measurement Science and Technology · doi:10.1088/0957-0233/20/9/092001 · Cited by 581
Interdigital sensors and transducers
Mamishev, A. V., Sundara-Rajan, K., Yang, F., Du, Y., & Zahn, M. (2004) · Proceedings of the IEEE · doi:10.1109/jproc.2004.826603 · Cited by 578
Metadata
- Authors
- Bustillo, J. M., Howe, R. T., & Muller, R. S.
- Venue
- Proceedings of the IEEE
- Published
- 1998
- Volume
- 86
- Issue
- 8
- Pages
- 1552-1574
- ISSN
- 0018-9219 (ISSN-L)
- OpenAlex
- W2169258629
- Cited by
- 644
- References
- 23
- FWCI
- 20.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.