The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Surface micromachining for microelectromechanical systems
Abstract
Surface micromachining is characterized by the fabrication of micromechanical structures from deposited thin films. Originally employed for integrated circuits, films composed of materials such as low-pressure chemical-vapor-deposition polycrystalline silicon, silicon nitride, and silicon dioxides can be sequentially deposited and selectively removed to build or "machine" three-dimensional structures whose functionality typically requires that they be freed from the planar substrate. Although the process to accomplish this fabrication dates from the 1960's, its rapid extension over the past few years and its application to batch fabrication of micromechanisms and of monolithic microelectromechanical systems (MEMS) make a thorough review of surface micromachining appropriate at this time. Four central issues of consequence to the MEMS technologist are: (i) the understanding and control of the material properties of microstructural films, such as polycrystalline silicon, (ii) the release of the microstructure, for example, by wet etching silicon dioxide sacrificial films, followed by its drying and surface passivation, (iii) the constraints defined by the combination of micromachining and integrated-circuit technologies when fabricating monolithic sensor devices, and (iv) the methods, materials, and practices used when packaging the completed device. Last, recent developments of hinged structures for postrelease assembly, high-aspect-ratio fabrication of molded parts from deposited thin films, and the advent of deep anisotropic silicon etching hold promise to extend markedly the capabilities of surface-micromachining technologies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Silicon as a mechanical material
Petersen, K. E. (1982) · Proceedings of the IEEE · doi:10.1109/proc.1982.12331 · Cited by 2,902
Critical Review: Adhesion in surface micromechanical structures
Maboudian, R., & Howe, R. T. (1997) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.589247 · Cited by 841
Self-citationLaterally Driven Polysilicon Resonant Microstructures
Tang, W. C., Nguyen, T.-C. H., & Howe, R. T. (1989) · Sensors and Actuators · doi:10.1016/0250-6874(89)87098-2 · Cited by 743
Self-citationBulk micromachining of silicon
Kovacs, G. T. A., Maluf, N. I., & Petersen, K. E. (1998) · Proceedings of the IEEE · doi:10.1109/5.704259 · Cited by 733
(1995) · Choice Reviews Online · doi:10.5860/choice.32-5109 · Cited by 573
OSATAKE, H., & INOUÉ, T. (1988) · Archives of Histology and Cytology · doi:10.1679/aohc.51.53 · Cited by 409
Guckel, H., Randazzo, T., & Burns, D. W. (1985) · Journal of Applied Physics · doi:10.1063/1.334435 · Cited by 294
Pister, K. S. J., Judy, M. W., Burgett, S. R., & Fearing, R. S. (1992) · Sensors and Actuators A: Physical · doi:10.1016/0924-4247(92)80172-y · Cited by 279
Laminated high-aspect-ratio microstructures in a conventional CMOS process
Fedder, G. K., Santhanam, S., Reed, M. L., Eagle, S. C., Guillou, D. F., Lu, M. S.-C., & Carley, L. R. (1996) · Sensors and Actuators A: Physical · doi:10.1016/s0924-4247(97)80100-8 · Cited by 250
Vacuum packaging for microsensors by glass-silicon anodic bonding
Henmi, H., Shoji, S., Shoji, Y., Yoshimi, K., & Esashi, M. (1994) · Sensors and Actuators A: Physical · doi:10.1016/0924-4247(94)80003-0 · Cited by 230
Cited by
Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication
Cumpston, B. H., Ananthavel, S. P., Barlow, S., Dyer, D. L., Ehrlich, J. E., Erskine, L. L., Heikal, A. A., Kuebler, S. M., Lee, I.-Y. S., McCord-Maughon, D., et al. (1999) · Nature · doi:10.1038/17989 · Cited by 2,232
Microelectromechanical systems (MEMS): fabrication, design and applications
Judy, J. W. (2001) · Smart Materials and Structures · doi:10.1088/0964-1726/10/6/301 · Cited by 828
An Introduction to Microelectromechanical Systems Engineering
Maluf, N. (2002) · Measurement Science and Technology · doi:10.1088/0957-0233/13/2/701 · Cited by 694
Piezoelectric MEMS sensors: state-of-the-art and perspectives
Tadigadapa, S., & Mateti, K. (2009) · Measurement Science and Technology · doi:10.1088/0957-0233/20/9/092001 · Cited by 581
Interdigital sensors and transducers
Mamishev, A. V., Sundara-Rajan, K., Yang, F., Du, Y., & Zahn, M. (2004) · Proceedings of the IEEE · doi:10.1109/jproc.2004.826603 · Cited by 578
Electrostatic pull-in instability in MEMS/NEMS: A review
Zhang, W.-M., Yan, H., Peng, Z.-K., & Meng, G. (2014) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2014.04.025 · Cited by 570
A BioMEMS Review: MEMS Technology for Physiologically Integrated Devices
Grayson, A. C. R., Shawgo, R. S., Johnson, A. M., Flynn, N. T., Li, Y., Cima, M. J., & Langer, R. (2004) · Proceedings of the IEEE · doi:10.1109/jproc.2003.820534 · Cited by 562
Ziaie, B. (2004) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2003.09.001 · Cited by 456
Microfabrication in Biology and Medicine
Voldman, J., Gray, M. L., & Schmidt, M. A. (1999) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.1.1.401 · Cited by 344
Surface tension-powered self-assembly of microstructures - The state-of-the-art
Syms, R. R. A., Yeatman, E. M., Bright, V. M., & Whitesides, G. M. (2003) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2003.811724 · Cited by 339
Microfabricated Reference Electrodes and their Biosensing Applications
Shinwari, M. W., Zhitomirsky, D., Deen, I. A., Selvaganapathy, P. R., Deen, M. J., & Landheer, D. (2010) · Sensors · doi:10.3390/s100301679 · Cited by 333
“2D or not 2D”: Shape-programming polymer sheets
Liu, Y., Genzer, J., & Dickey, M. D. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.09.001 · Cited by 329
Micromachined tunable metamaterials: a review
Liu, A. Q., Zhu, W. M., Tsai, D. P., & Zheludev, N. I. (2012) · Journal of Optics · doi:10.1088/2040-8978/14/11/114009 · Cited by 287
Evolution of Biochip Technology: A Review from Lab-on-a-Chip to Organ-on-a-Chip
Azizipour, N., Avazpour, R., Rosenzweig, D. H., Sawan, M., & Ajji, A. (2020) · Micromachines · doi:10.3390/mi11060599 · Cited by 277
Micromachined thermally based CMOS microsensors
Baltes, H., Paul, O., & Brand, O. (1998) · Proceedings of the IEEE · doi:10.1109/5.704271 · Cited by 261
Review of MEMS-based drug delivery and dosing systems
Tsai, N.-C., & Sue, C.-Y. (2007) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2006.06.014 · Cited by 258
IC-Compatible Polysilicon Surface Micromachining
Sniegowski, J. J., & de Boer, M. P. (2000) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.30.1.299 · Cited by 255
Kumar, S. S., & Pant, B. D. (2014) · Microsystem Technologies · doi:10.1007/s00542-014-2215-7 · Cited by 252
Microsensor Integration Into Systems-on-Chip
Brand, O. (2006) · Proceedings of the IEEE · doi:10.1109/jproc.2006.873618 · Cited by 106
Whole-cell biochips for bio-sensing: integration of live cells and inanimate surfaces
Ben-Yoav, H., Melamed, S., Freeman, A., Shacham-Diamand, Y., & Belkin, S. (2011) · Critical Reviews in Biotechnology · doi:10.3109/07388551.2010.532767 · Cited by 52
Metadata
- Authors
- Bustillo, J. M., Howe, R. T., & Muller, R. S.
- Venue
- Proceedings of the IEEE
- Published
- 1998
- Volume
- 86
- Issue
- 8
- Pages
- 1552-1574
- ISSN
- 0018-9219 (ISSN-L)
- OpenAlex
- W2169258629
- Cited by
- 644
- References
- 23
- FWCI
- 20.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.