The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Power semiconductor device figure of merit for high-frequency applications
Abstract
A figure of merit (the Baliga high-frequency figure of merit) is derived for power semiconductor devices operating in high-frequency circuits. Using this figure of merit, it is predicted that the power losses incurred in the power device will increase as the square root of the operating frequency and approximately in proportion to the output power. By relating the device power dissipation to the intrinsic material parameters, it is shown that the power loss can be reduced by using semiconductors with larger mobility and critical electric field for breakdown. Examination of data in the literature indicates that significant performance improvement can be achieved by replacing silicon with gallium arsenide, silicon carbide, or semiconducting diamond.>
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Baliga, B. J. (1987) · Medical Entomology and Zoology · Cited by 683
Self-citationSemiconductors for high-voltage, vertical channel field-effect transistors
Baliga, B. J. (1982) · Journal of Applied Physics · doi:10.1063/1.331646 · Cited by 470
Self-citationPhysical limitations on frequency and power parameters of transistors
Johnson, E. (2005) · IRE International Convention Record · doi:10.1109/irecon.1965.1147520 · Cited by 449
Figure of merit for semiconductors for high-speed switches
Keyes, R. W. (1972) · Proceedings of the IEEE · doi:10.1109/proc.1972.8593 · Cited by 160
Cited by
Large-band-gap SiC, III-V nitride, and II-VI ZnSe-based semiconductor device technologies
Morkoç, H., Strite, S., Gao, G. B., Lin, M. E., Sverdlov, B., & Burns, M. (1994) · Journal of Applied Physics · doi:10.1063/1.358463 · Cited by 2,733
Alternative Plasmonic Materials: Beyond Gold and Silver
Naik, G. V., Shalaev, V. M., & Boltasseva, A. (2013) · Advanced Materials · doi:10.1002/adma.201205076 · Cited by 2,373
GaN: Processing, defects, and devices
Pearton, S. J., Zolper, J. C., Shul, R. J., & Ren, F. (1999) · Journal of Applied Physics · doi:10.1063/1.371145 · Cited by 1,814
Material Science and Device Physics in SiC Technology for High-Voltage Power Devices
Kimoto, T. (2015) · Japanese Journal of Applied Physics · doi:10.7567/jjap.54.040103 · Cited by 1,176
Comparison of 6H-SiC, 3C-SiC, and Si for power devices
Bhatnagar, M., & Baliga, B. J. (1993) · IEEE Transactions on Electron Devices · doi:10.1109/16.199372 · Cited by 1,120
Self-citation
Metadata
- Authors
- Baliga, B. J.
- Venue
- IEEE Electron Device Letters
- Published
- 1989-10
- Volume
- 10
- Issue
- 10
- Pages
- 455-457
- ISSN
- 0741-3106 (ISSN-L)
- 1558-0563
- OpenAlex
- W2103947167
- Cited by
- 1,070
- References
- 4
- FWCI
- 2.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.