Thermal component model for electrothermal analysis of IGBT module systems
The DOI matches its Crossref record.
Abstract
The insulated gate bipolar transistor (IGBT) modules are getting more accepted and increasingly used in power electronic systems as high power and high voltage switching components. However, IGBT technology with high speed and greater packaging density leads to higher power densities on the chips and increases higher operating temperatures. These operating temperatures in turn lead to an increase of the failure rate and a reduction of the reliability. In this paper, the static and dynamic thermal behavior of IGBT module system mounted on a water-cooled heat sink is analyzed. Although three-dimensional finite element method (3-D FEM) delivers very accurate results, its usage is limited by an imposed computation time in arbitrary load cycles. Therefore, an RC component model (RCCM) is investigated to extract thermal resistances and time constants for a thermal network. The uniqueness of the RCCM is an introduction of the time constants based on the Elmore delay, which represents the propagation delay of the heat flux through the physical geometry of each layer. The dynamic behavior predicted by the thermal network is equivalent to numerical solutions of the 3-D FEM. The RCCM quickly offers insight into the physical layers of the components and provides useful information in a few minutes for the arbitrary or periodic power waveforms. This approach enables a system designer to couple the thermal prediction with a circuit simulator to analyze the electrothermal behavior of IGBT module system, simultaneously.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Condition Monitoring for Device Reliability in Power Electronic Converters: A Review
Yang, S., Xiang, D., Bryant, A., Mawby, P., Ran, L., & Tavner, P. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2049377 · Cited by 1,278
“The solder attach is assumed to reach its end-of-life as a total amount of deformation work Wtot , has been accumulated [77], [80], [97].”
BackgroundMethodThermal Management on IGBT Power Electronic Devices and Modules
Qian, C., Gheitaghy, A. M., Fan, J., Tang, H., Sun, B., Ye, H., & Zhang, G. (2018) · IEEE Access · doi:10.1109/access.2018.2793300 · Cited by 342
Active thermal control of power electronic modules
Murdock, D. A., Torres, J. E. R., Connors, J. J., & Lorenz, R. D. (2006) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2005.863905 · Cited by 332
Hanif, A., Yu, Y., DeVoto, D., & Khan, F. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2860587 · Cited by 272
A Physical RC Network Model for Electrothermal Analysis of a Multichip SiC Power Module
Li, J., Castellazzi, A., Eleffendi, M. A., Gurpinar, E., Johnson, C. M., & Mills, L. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2697959 · Cited by 105
Dynamic Electrothermal Model of Paralleled IGBT Modules With Unbalanced Stray Parameters
Tang, Y., & Ma, H. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2542198 · Cited by 66
Review of SiC MOSFET based three-phase inverter lifetime prediction
Ni, Z., Lyu, X., Yadav, O. P., & Cao, D. (2017) · 2017 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2017.7930819 · Cited by 40
“No consideration about thermal coupling effect [44] [45] [46] [47]”
Background
Metadata
- Authors
- Yun, C.-S., Malberti, P., Ciappa, M., & Fichtner, W.
- Venue
- IEEE Transactions on Advanced Packaging
- Published
- 2001
- Volume
- 24
- Issue
- 3
- Pages
- 401-406
- ISSN
- 1521-3323 (ISSN-L)
- OpenAlex
- W2156047413
- Cited by
- 153
- References
- 0
- FWCI
- 5.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.