The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Analysis and design of electronic transformers for electric power distribution system
Abstract
A transformer performs many functions such as voltage transformation, isolation and noise decoupling, and it is an indispensable component in electric power distribution systems. However, at low frequencies (60/50 Hz), it is a bulky and expensive component. In this paper, the concept of electronic transformers is further extended and explored for its suitability in power distribution systems. It should be noted that from the input/output behavior, the electronic transformer and the conventional transformer are identical. Possible topologies employing static converters connected on the primary and secondary sides are explored to realize high-frequency operation of the magnetic core. To assist the commutation process, a four-step switching has been developed which does not require the use of snubbers. Reduced size, losses, higher efficiency, and better voltage regulation are some of the advantages of this approach. A 10 kVA design example along with experiment results are discussed. It is shown that a transformer designed with a conventional grain-oriented silicon-steel core can process three times the power at 1 kHz operating frequency as compared to 60 Hz. The proposed method is scalable in voltage/current with the currently available insulated gate bipolar transistor (IGBT) devices connected in series without special snubbers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Harada, K., Anan, F., Yamasaki, K., Jinno, M., Kawata, Y., & Nakashima, T. (2002) · PESC record · doi:10.1109/pesc.1996.548755 · Cited by 93
Lander, C. W. (1987) · McGraw-Hill, Inc. eBooks · Cited by 71
Cited by
Review of Solid-State Transformer Technologies and Their Application in Power Distribution Systems
She, X., Huang, A. Q., & Burgos, R. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2277917 · Cited by 1,164
Applicability of solid-state transformers in today's and future distribution grids
Huber, J. E., & Kolar, J. W. (2019) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2017.2738610 · Cited by 506
Solid-State Transformers: On the Origins and Evolution of Key Concepts
Huber, J. E., & Kolar, J. W. (2016) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2016.2588878 · Cited by 449
Fan, H., & Li, H. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2160652 · Cited by 401
Research on voltage and power balance control for cascaded modular solid-state transformer
Shi, J., Gou, W., Yuan, H., Zhao, T., & Huang, A. Q. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2106803 · Cited by 362
Hannan, M. A., Ker, P. J., Lipu, M. S. H., Choi, Z. H., Rahman, M. S. A., Muttaqi, K. M., & Blaabjerg, F. (2020) · IEEE Access · doi:10.1109/access.2020.2967345 · Cited by 339
Solid-State Transformer Architecture Using AC–AC Dual-Active-Bridge Converter
Qin, H., & Kimball, J. W. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2204710 · Cited by 310
Huber, J. E., & Kolar, J. W. (2014) · 2014 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2014.6954023 · Cited by 264
A Power Electronic-Based Distribution Transformer
Ronan, E. R., Sudhoff, S. D., Glover, S. F., & Galloway, D. L. (2002) · IEEE Power Engineering Review · doi:10.1109/mper.2002.4312081 · Cited by 264
Zhu, Q., Wang, L., Huang, A. Q., Booth, K., & Zhang, L. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2829174 · Cited by 155
Soft-Switching Solid-State Transformer With Reduced Conduction Loss
Zheng, L., Kandula, R. P., & Divan, D. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3030795 · Cited by 105
Abu-Siada, A., Budiri, J., & Abdou, A. (2018) · Electronics · doi:10.3390/electronics7110298 · Cited by 69
New Bidirectional Intelligent Semiconductor Transformer for Smart Grid Application
Han, B.-M., Choi, N.-S., & Lee, J.-Y. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2284009 · Cited by 37
Research on Unbalanced-Load Correction Capability of Two Power Electronic Transformer Topologies
Wang, X., Liu, J., Ouyang, S., & Meng, F. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2331701 · Cited by 37
A Leakage-Inductance-Tolerant Commutation Strategy for Isolated AC/AC Converters
Nasir, U., Costabeber, A., Rivera, M., Wheeler, P., & Clare, J. (2019) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2018.2861326 · Cited by 35
Power Electronic Transformer application to grid connected photovoltaic systems
Brando, G., Dannier, A., & Rizzo, R. (2009) · 2009 International Conference on Clean Electrical Power · doi:10.1109/iccep.2009.5211954 · Cited by 31
Power flow control scheme for multiport power electronics transformers
Zhang, H., Jing, L., Wu, X., Jiang, J., Wickramasinghe, H. R., & Konstantinou, G. (2018) · High Voltage · doi:10.1049/hve.2018.5034 · Cited by 8
Dual pid loop controller for HF link inverter in two-stage SST
Bhaskar, R., & Agarwal, V. (2016) · 2016 IEEE 7th Power India International Conference (PIICON) · doi:10.1109/poweri.2016.8077474 · Cited by 7
Li, C., Chen, T., Su, L., Zhang, Z., & Zheng, Z. (2025) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2024.3497412 · Cited by 7
Solid state transformer for wind power interfacing
Tom, B. M., & Ashok, S. (2017) · 2017 IEEE International Conference on Signal Processing, Informatics, Communication and Energy Systems (SPICES) · doi:10.1109/spices.2017.8091314 · Cited by 3
Metadata
- Authors
- Kang, M., Enjeti, P. N., & Pitel, I. J.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 1999-11
- Volume
- 14
- Issue
- 6
- Pages
- 1133-1141
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2103069022
- Cited by
- 365
- References
- 2
- FWCI
- 3.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.