Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 348

The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.

Bent-beam electrothermal actuators-Part I: Single beam and cascaded devices

Long Que, Jae-Sung Park, Gianchandani, Y.B. · 2001 · Journal of Microelectromechanical Systems

Abstract

This paper describes electrothermal microactuators that generate rectilinear displacements and forces by leveraging deformations caused by localized thermal stresses. In one manifestation, an electric current is passed through a V-shaped beam anchored at both ends, and thermal expansion caused by joule heating pushes the apex outward. Analytical and finite element models of device performance are presented along with measured results of devices fabricated using electroplated Ni and p/sup ++/ Si as structural materials. A maskless process extension for incorporating thermal and electrical isolation is described. Nickel devices with 410-/spl mu/m-long, 6-/spl mu/m-wide, and 3-/spl mu/m-thick beams demonstrate 10 /spl mu/m static displacements at 79 mW input power; silicon devices with 800-/spl mu/m-long, 13.9-/spl mu/m-wide, and 3.7-/spl mu/m-thick beams demonstrate 5 /spl mu/m displacement at 180 mW input power. Cascaded silicon devices using three beams of similar dimensions offer comparable displacement with 50-60% savings in power consumption. The peak output forces generated are estimated to be in the range from 1 to 10 mN for the single beam devices and from 0.1 to 1 mN for the cascaded devices. Measured bandwidths are /spl ap/700 Hz for both. The typical drive voltages used are /spl les/12 V, permitting the use of standard electronic interfaces that are generally inadequate for electrostatic actuators.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1109/84.925771

Cites

6 of 6 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 6 references

Cited by

See all 348

Metadata

Authors
Que, L., Park, J.-S., & Gianchandani, Y. B.
Venue
Journal of Microelectromechanical Systems
Published
2001-06
Volume
10
Issue
2
Pages
247-254
ISSN
1057-7157 (ISSN-L)
OpenAlex
W2124606332
Cited by
348
References
6
FWCI
15.89
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Bent-beam electrothermal actuators-Part I: Single beam and cascaded devices. https://app.cochat.ai/papers/10.1109/84.925771
The paper
Que, L., Park, J.-S., & Gianchandani, Y. B. (2001). Bent-beam electrothermal actuators-Part I: Single beam and cascaded devices. Journal of Microelectromechanical Systems. https://doi.org/10.1109/84.925771

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.