The DOI matches its Crossref record; 114 of the 114 references it cites were found in a registry or an index.
Prognostics and Health Management: A Review of Vibration Based Bearing and Gear Health Indicators
Open accessAbstract
Prognostics and health management is an emerging discipline to scientifically manage the health condition of engineering systems and their critical components. It mainly consists of three main aspects: construction of health indicators, remaining useful life prediction, and health management. Construction of health indicators aims to evaluate the system's current health condition and its critical components. Given the observations of a health indicator, prediction of the remaining useful life is used to infer the time when an engineering systems or a critical component will no longer perform its intended function. Health management involves planning the optimal maintenance schedule according to the system's current and future health condition, its critical components and the replacement costs. Construction of health indicators is the key to predicting the remaining useful life. Bearings and gears are the most common mechanical components in rotating machines, and their health conditions are of great concern in practice. Because it is difficult to measure and quantify the health conditions of bearings and gears in many cases, numerous vibration-based methods have been proposed to construct bearing and gear health indicators. This paper presents a thorough review of vibration-based bearing and gear health indicators constructed from mechanical signal processing, modeling, and machine learning. This review paper will be helpful for designing further advanced bearing and gear health indicators and provides a basis for predicting the remaining useful life of bearings and gears. Most of the bearing and gear health indicators reviewed in this paper are highly relevant to simulated and experimental run-to-failure data rather than artificially seeded bearing and gear fault data. Finally, some problems in the literature are highlighted and areas for future study are identified.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
LeCun, Y., Bengio, Y., & Hinton, G. (2015) · Nature · doi:10.1038/nature14539 · Cited by 84,126
Gammaitoni, L., Hänggi, P., Jung, P., & Marchesoni, F. (1998) · Reviews of Modern Physics · doi:10.1103/revmodphys.70.223 · Cited by 5,443
A review on machinery diagnostics and prognostics implementing condition-based maintenance
Jardine, A. K. S., Lin, D., & Banjevic, D. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.09.012 · Cited by 4,816
Stochastic Resonance: From Suprathreshold Stochastic Resonance to Stochastic Signal Quantization
McDonnell, M. D., Stocks, N. G., Pearce, C. E. M., & Abbott, D. (2008) · Cambridge University Press eBooks · doi:10.1017/cbo9780511535239 · Cited by 2,403
Remaining useful life estimation – A review on the statistical data driven approaches
Si, X.-S., Wang, W., Hu, C.-H., & Zhou, D.-H. (2011) · European Journal of Operational Research · doi:10.1016/j.ejor.2010.11.018 · Cited by 2,162
Sparse and Redundant Representations: From Theory to Applications in Signal and Image Processing
Elad, M. (2010) · doi:10.1007/978-1-4419-7011-4 · Cited by 1,897
A review on empirical mode decomposition in fault diagnosis of rotating machinery
Lei, Y., Lin, J., He, Z., & Zuo, M. J. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.09.015 · Cited by 1,886
Jia, F., Lei, Y., Lin, J., Zhou, X., & Lu, N. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.10.025 · Cited by 1,710
Pimentel, M. A. F., Clifton, D. A., Clifton, L., & Tarassenko, L. (2014) · Signal Processing · doi:10.1016/j.sigpro.2013.12.026 · Cited by 1,649
Lee, J., Wu, F., Zhao, W., Ghaffari, M., Liao, L., & Siegel, D. (2014) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.06.004 · Cited by 1,594
Qiu, H., Lee, J., Lin, J., & Yu, G. (2006) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2005.03.007 · Cited by 1,477
The spectral kurtosis: a useful tool for characterising non-stationary signals
Antoni, J. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2004.09.001 · Cited by 1,441
Novelty detection: a review—part 1: statistical approaches
Markou, M., & Singh, S. (2003) · Signal Processing · doi:10.1016/j.sigpro.2003.07.018 · Cited by 1,432
Antoni, J., & Randall, R. B. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2004.09.002 · Cited by 1,333
A recurrent neural network based health indicator for remaining useful life prediction of bearings
Guo, L., Li, N., Jia, F., Lei, Y., & Lin, J. (2017) · Neurocomputing · doi:10.1016/j.neucom.2017.02.045 · Cited by 1,231
Rotating machinery prognostics: State of the art, challenges and opportunities
Heng, A., Zhang, S., Tan, A. C. C., & Mathew, J. (2009) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2008.06.009 · Cited by 1,207
Peng, Z. K., & Chu, F. L. (2004) · Mechanical Systems and Signal Processing · doi:10.1016/s0888-3270(03)00075-x · Cited by 1,192
PRONOSTIA : An experimental platform for bearings accelerated degradation tests.
Nectoux, P., Gouriveau, R., Medjaher, K., Ramasso, E., Chebel‐Morello, B., Noureddine Zerhouni, A., & Varnier, C. (2012) · HAL · Cited by 928
FEATURE EXTRACTION BASED ON MORLET WAVELET AND ITS APPLICATION FOR MECHANICAL FAULT DIAGNOSIS
LIN, J., & QU, L. (2000) · Journal of Sound and Vibration · doi:10.1006/jsvi.2000.2864 · Cited by 879
Vibration‐based Condition Monitoring: Industrial, Aerospace and Automotive Applications
Randall, R. B. (2011) · Wiley eBooks · doi:10.1002/9780470977668 · Cited by 868
Prognostics and Health Management of Electronics
Pecht, M. G. (2008) · Wiley eBooks · doi:10.1002/9780470385845 · Cited by 847
Novelty detection: a review—part 2:
Markou, M., & Singh, S. (2003) · Signal Processing · doi:10.1016/j.sigpro.2003.07.019 · Cited by 817
A review on prognostics and health monitoring of Li-ion battery
Zhang, J., & Lee, J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.03.101 · Cited by 792
Residual-life distributions from component degradation signals: A Bayesian approach
GEBRAEEL, N. Z., LAWLEY, M. A., LI, R., & RYAN, J. K. (2005) · IIE Transactions · doi:10.1080/07408170590929018 · Cited by 788
RANDALL, R. B., ANTONI, J., & CHOBSAARD, S. (2001) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.2001.1415 · Cited by 761
Current status of machine prognostics in condition-based maintenance: a review
Peng, Y., Dong, M., & Zuo, M. J. (2010) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-009-2482-0 · Cited by 735
Antoni, J. (2009) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2008.10.010 · Cited by 691
Stochastic modelling and analysis of degradation for highly reliable products
Ye, Z., & Xie, M. (2015) · Applied Stochastic Models in Business and Industry · doi:10.1002/asmb.2063 · Cited by 685
The infogram: Entropic evidence of the signature of repetitive transients
Antoni, J. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.04.034 · Cited by 684
A Model-Based Method for Remaining Useful Life Prediction of Machinery
Lei, Y., Li, N., Gontarz, S., Lin, J., Radkowski, S., & Dybala, J. (2016) · IEEE Transactions on Reliability · doi:10.1109/tr.2016.2570568 · Cited by 617
Huang, R., Xi, L., Li, X., Liu, C., Qiu, H., & Lee, J. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.11.008 · Cited by 523
Vibration-based Condition Monitoring: Industrial, Aerospace and Automotive Applications
Randall, R. B. (2011) · Cited by 504
Wang, Y., Xiang, J., Markert, R., & Liang, M. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.04.039 · Cited by 504
Ben Ali, J., Chebel-Morello, B., Saidi, L., Malinowski, S., & Fnaiech, F. (2015) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2014.10.014 · Cited by 502
Approximate Entropy as a diagnostic tool for machine health monitoring
Yan, R., & Gao, R. X. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2006.02.009 · Cited by 454
Robust performance degradation assessment methods for enhanced rolling element bearing prognostics
Qiu, H., Lee, J., Lin, J., & Yu, G. (2003) · Advanced Engineering Informatics · doi:10.1016/j.aei.2004.08.001 · Cited by 430
Tse, P. W., Peng, Y. H., & Yam, R. (2001) · Journal of Vibration and Acoustics · doi:10.1115/1.1379745 · Cited by 422
Cyclic spectral analysis in practice
Antoni, J. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2006.08.007 · Cited by 410
Permutation entropy: A nonlinear statistical measure for status characterization of rotary machines
Yan, R., Liu, Y., & Gao, R. X. (2012) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2011.11.022 · Cited by 377
Differential Diagnosis of Gear and Bearing Faults
Antoni, J., & Randall, R. B. (2002) · Journal of Vibration and Acoustics · doi:10.1115/1.1456906 · Cited by 361
A Two-Stage Data-Driven-Based Prognostic Approach for Bearing Degradation Problem
Wang, Y., Peng, Y., Zi, Y., Jin, X., & Tsui, K.-L. (2016) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2016.2535368 · Cited by 344
Self-citationGao, R. X., & Yan, R. (2011) · doi:10.1007/978-1-4419-1545-0 · Cited by 340
Dong, M., & He, D. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2006.10.001 · Cited by 318
A new feature for monitoring the condition of gearboxes in non-stationary operating conditions
Bartelmus, W., & Zimroz, R. (2009) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2009.01.014 · Cited by 305
Remaining Useful Life Estimation of Critical Components With Application to Bearings
Medjaher, K., Tobon-Mejia, D. A., & Zerhouni, N. (2012) · IEEE Transactions on Reliability · doi:10.1109/tr.2012.2194175 · Cited by 292
Sensory-Updated Residual Life Distributions for Components With Exponential Degradation Patterns
Gebraeel, N. (2006) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2006.876609 · Cited by 286
Blind separation of vibration components: Principles and demonstrations
Antoni, J. (2005) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.08.008 · Cited by 284
Ocak, H., Loparo, K. A., & Discenzo, F. M. (2007) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2007.01.001 · Cited by 282
Gear crack level identification based on weighted K nearest neighbor classification algorithm
Lei, Y., & Zuo, M. J. (2009) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2009.01.009 · Cited by 277
Hidden semi-Markov model-based methodology for multi-sensor equipment health diagnosis and prognosis
Dong, M., & He, D. (2007) · European Journal of Operational Research · doi:10.1016/j.ejor.2006.01.041 · Cited by 267
Yu, J. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2011.02.006 · Cited by 258
A New Method Based on Stochastic Process Models for Machine Remaining Useful Life Prediction
Lei, Y., Li, N., & Lin, J. (2016) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2016.2601004 · Cited by 253
Bozchalooi, I. S., & Liang, M. (2007) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2007.07.038 · Cited by 249
Tse, P. W., & Wang, D. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.05.024 · Cited by 243
Self-citationROLLING ELEMENT BEARING DIAGNOSTICS IN RUN-TO-FAILURE LIFETIME TESTING
WILLIAMS, T., RIBADENEIRA, X., BILLINGTON, S., & KURFESS, T. (2001) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.2001.1418 · Cited by 243
Application of relevance vector machine and logistic regression for machine degradation assessment
Caesarendra, W., Widodo, A., & Yang, B.-S. (2010) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2009.10.011 · Cited by 242
Intelligent Fault Diagnosis and Remaining Useful Life Prediction of Rotating Machinery
(2017) · Elsevier eBooks · doi:10.1016/c2016-0-00367-4 · Cited by 224
Pan, Y., Chen, J., & Guo, L. (2008) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2008.05.011 · Cited by 197
Remaining Useful Life Prediction of Rolling Bearings Using an Enhanced Particle Filter
Qian, Y., & Yan, R. (2015) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2015.2427891 · Cited by 188
A Neural Network Degradation Model for Computing and Updating Residual Life Distributions
Gebraeel, N., & Lawley, M. (2008) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2007.910302 · Cited by 188
Pan, Y., Chen, J., & Li, X. (2009) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2009.07.012 · Cited by 185
Condition monitoring and remaining useful life prediction using degradation signals: revisited
Chen, N., & Tsui, K. (2013) · IIE Transactions · doi:10.1080/0740817x.2012.706376 · Cited by 176
Self-citationZimroz, R., Bartelmus, W., Barszcz, T., & Urbanek, J. (2014) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.09.010 · Cited by 174
Intelligent condition-based prediction of machinery reliability
Heng, A., Tan, A. C. C., Mathew, J., Montgomery, N., Banjevic, D., & Jardine, A. K. S. (2009) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2008.12.006 · Cited by 173
Bearing Degradation Evaluation Using Recurrence Quantification Analysis and Kalman Filter
Qian, Y., Yan, R., & Hu, S. (2014) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2014.2313034 · Cited by 170
A Review of Time Synchronous Average Algorithms
Bechhoefer, E. R., & Kingsley, M. (2009) · Annual Conference of the PHM Society · Cited by 169
Hong, H., & Liang, M. (2008) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2008.07.011 · Cited by 163
Pan, Y. N., Chen, J., & Li, X. L. (2009) · Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science · doi:10.1243/09544062jmes1224 · Cited by 162
Health Condition Monitoring of Machines Based on Hidden Markov Model and Contribution Analysis
Yu, J. (2012) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2012.2184015 · Cited by 156
Robust health evaluation of gearbox subject to tooth failure with wavelet decomposition
Wang, D., Miao, Q., & Kang, R. (2009) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2009.02.013 · Cited by 136
Self-citationMiao, Q., & Makiš, V. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2006.01.009 · Cited by 136
Self-citationMultiwavelet transform and its applications in mechanical fault diagnosis – A review
Sun, H., He, Z., Zi, Y., Yuan, J. P., Wang, X., Chen, J., & He, S. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.09.015 · Cited by 131
Bearing performance degradation assessment using locality preserving projections
Yu, J. (2010) · Expert Systems with Applications · doi:10.1016/j.eswa.2010.12.079 · Cited by 117
Li, C., Liang, M., & Wang, T. (2015) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.04.004 · Cited by 109
Liu, Q., Dong, M., Lv, W., Geng, X., & Li, Y. (2015) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.03.029 · Cited by 106
Adaptive state detection of gearboxes under varying load conditions based on parametric modelling
Zhan, Y., Makiš, V., & Jardine, A. K. S. (2004) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2004.08.004 · Cited by 106
Degradation trend estimation of slewing bearing based on LSSVM model
Lu, C., Chen, J., Hong, R., et al. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.02.031 · Cited by 100
Wang, D., Tse, P. W.-T., Guo, W. J., et al. (2010) · Measurement Science and Technology · doi:10.1088/0957-0233/22/2/025102 · Cited by 99
Self-citationHealth Monitoring of Cooling Fans Based on Mahalanobis Distance With mRMR Feature Selection
Jin, X., Ma, E. W. M., Cheng, L. L., et al. (2012) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2012.2187240 · Cited by 98
Lin, D., Wiseman, M., Banjević, D., & Jardine, A. K. S. (2003) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2003.10.005 · Cited by 98
Shen, Z., He, Z., Chen, X., Sun, C., & Liu, Z. (2012) · Sensors · doi:10.3390/s120810109 · Cited by 93
ARX model-based gearbox fault detection and localization under varying load conditions
Yang, M., & Makiš, V. (2010) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2010.07.001 · Cited by 91
Jin, X., & Chow, T. W. S. (2013) · Expert Systems with Applications · doi:10.1016/j.eswa.2013.04.024 · Cited by 86
Wang, D., Miao, Q., Zhou, Q., & Zhou, G. (2014) · Journal of vibration and acoustics · doi:10.1115/1.4028833 · Cited by 86
Self-citationCombined Probability Approach and Indirect Data-Driven Method for Bearing Degradation Prognostics
Caesarendra, W., Widodo, A., Thom, P. H., Yang, B., & Setiawan, J. D. (2011) · IEEE Transactions on Reliability · doi:10.1109/tr.2011.2104716 · Cited by 80
Yu, J. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.06.004 · Cited by 80
Caesarendra, W., Kosasih, B., Tieu, A. K., et al. (2014) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2014.05.021 · Cited by 75
Tang, D., Makiš, V., Jafari, L., et al. (2014) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2014.10.015 · Cited by 68
Health monitoring of cooling fan bearings based on wavelet filter
He, W. P., Miao, Q., Azarian, M. H., & PECHT, M. G. (2015) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.04.002 · Cited by 63
Self-citationA robust diagnostic model for gearboxes subject to vibration monitoring
Zhan, Y., & Makiš, V. (2005) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2005.04.018 · Cited by 61
Tao, B., Zhu, L., Ding, H., et al. (2006) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2006.03.005 · Cited by 60
Wang, Z., Lü, C., Wang, Z., Liu, H., & Fan, H. (2013) · Transactions of the Institute of Measurement and Control · doi:10.1177/0142331212472929 · Cited by 57
Locally Linear Embedding on Grassmann Manifold for Performance Degradation Assessment of Bearings
Ma, M., Chen, X., Zhang, X., Ding, B., & Wang, S. (2017) · IEEE Transactions on Reliability · doi:10.1109/tr.2017.2691730 · Cited by 54
Deep Feature Learning Architectures for Daily Reservoir Inflow Forecasting
Li, C., Bai, Y., & Zeng, B. (2016) · Water Resources Management · doi:10.1007/s11269-016-1474-8 · Cited by 53
Zhan, Y., & Jardine, A. K. S. (2004) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2004.10.024 · Cited by 51
Circular domain features based condition monitoring for low speed slewing bearing
Caesarendra, W., Kosasih, B., Tieu, A. K., & Moodie, C. A. S. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.10.021 · Cited by 50
Bearing performance degradation assessment based on the rough support vector data description
Zhu, X., Zhang, Y., & Zhu, Y. (2012) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.08.008 · Cited by 46
A nonlinear probabilistic method and contribution analysis for machine condition monitoring
Yu, J. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.01.010 · Cited by 46
A probabilistic description scheme for rotating machinery health evaluation
Miao, Q., Wang, D., & PECHT, M. G. (2010) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-010-0908-0 · Cited by 40
Self-citationHong, S., Wang, B., Li, G., & Hong, Q. (2014) · Journal of vibration and acoustics · doi:10.1115/1.4028321 · Cited by 37
Wang, H., & Chen, J. (2013) · Journal of Vibration and Control · doi:10.1177/1077546313483653 · Cited by 36
Pan, Y., Chen, J., & Dong, G. (2009) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1243/09544062jmes1447 · Cited by 34
Singularity detection in machinery health monitoring using Lipschitz exponent function
Miao, Q., Huang, H., & Fan, X. (2007) · Journal of Mechanical Science and Technology · doi:10.1007/bf02916351 · Cited by 31
Self-citationSun, C., Zhang, Z., He, Z., Shen, Z., Chen, B., & Xiao, W. (2013) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/0954406213486735 · Cited by 27
Degradation Trend Estimation and Prognosis of Large Low Speed Slewing Bearing Lifetime
Kosasih, B., Caesarendra, W., Tieu, K., Widodo, A., Moodie, C. A. S., & Tieu, A. K. (2014) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.493.343 · Cited by 26
Yu, J. (2016) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2016.06.046 · Cited by 26
Xiao, W., Chen, J., Dong, G., Zhou, Y., & Wang, Z. (2011) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/0954406211412015 · Cited by 24
Caesarendra, W., Tjahjowidodo, T., Kosasih, B., & Tieu, A. K. (2017) · Machines · doi:10.3390/machines5020011 · Cited by 23
Study on cyclic energy indicator for degradation assessment of rolling element bearings
Dong, G., & Chen, J. (2010) · Journal of Vibration and Control · doi:10.1177/1077546310362860 · Cited by 22
Bartelmus, W. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.04.003 · Cited by 21
Bearing Performance Degradation Assessment Using Lifting Wavelet Packet Symbolic Entropy and SVDD
Zhou, J., Guo, H., Zhang, L., Xu, Q., & Li, H. (2016) · Shock and Vibration · doi:10.1155/2016/3086454 · Cited by 20
MD‐based approaches for system health monitoring: a review
Jin, X., Wang, Y., Chow, T. W. S., & Sun, Y. (2017) · IET Science Measurement & Technology · doi:10.1049/iet-smt.2016.0340 · Cited by 18
Zhang, B., Zhang, L., Xu, J., & Wang, P. (2014) · Entropy · doi:10.3390/e16105400 · Cited by 17
Tse, P. W.-T., & Wang, D. (2017) · Sensors · doi:10.3390/s17020369 · Cited by 14
Self-citation
Cited by
Zio, E. (2022) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2021.108119 · Cited by 714
Gangsar, P., & Tiwari, R. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.106908 · Cited by 605
Transformer Network for Remaining Useful Life Prediction of Lithium-Ion Batteries
Chen, D., Hong, W., & Zhou, X. (2022) · IEEE Access · doi:10.1109/access.2022.3151975 · Cited by 408
An enhanced convolutional neural network for bearing fault diagnosis based on time–frequency image
Zhang, Y., Xing, K., Bai, R., Sun, D., & Meng, Z. (2020) · Measurement · doi:10.1016/j.measurement.2020.107667 · Cited by 283
Hasib, S. A., Islam, S., Chakrabortty, R. K., Ryan, M. J., Saha, D. K., Ahamed, M. H., Moyeen, S. I., Das, S. K., Ali, M. F., Islam, M. R., et al. (2021) · IEEE Access · doi:10.1109/access.2021.3089032 · Cited by 272
Metadata
- Authors
- Wang, D., Tsui, K.-L., & Miao, Q.
- Venue
- IEEE Access
- Published
- 2018
- Volume
- 6
- Pages
- 665-676
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W2768148617
- Cited by
- 455
- References
- 114
- FWCI
- 27.38
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.