The DOI matches its Crossref record; 93 of the 93 references it cites were found in a registry or an index.
An Overview on Thermal Safety Issues of Lithium-ion Batteries for Electric Vehicle Application
Open accessAbstract
Lithium-ion batteries (LIBs) are being intensively studied and universally used as power sources for electric vehicle applications. Despite the staggering growth in sales of LIBs worldwide, thermal safety issues still turn out to be the most intolerable pain point, and remain the focus of research for technological improvements. This paper presents a comprehensive overview on thermal safety issues of LIBs, in terms of thermal behavior and thermal runaway modeling and tests for battery cells, and safety management strategies for battery packs. Considering heat generation mechanism and thermal characteristics of LIBs, heat generation, dissipation and accumulation inside a cell are elaborated. The triggering factors leading to thermal runaway are also summarized. Finally, thermal runaway detection and prevention strategies for both cell- and pack-levels are introduced. Different engineering approaches from material refinement and additive adoption to thermal, electrical, and mechanical design are presented for thermal runaway prevention.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328 · cited 1×
“[8] simulated the galvanostatic charge and discharge of LIBs using the concentrated solution theory to describe the transport properties in the electrolyte.”
MethodThermal runaway caused fire and explosion of lithium ion battery
Wang, Q., Ping, P., Zhao, X., Chu, G., Sun, J., & Chen, C. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.02.038 · Cited by 3,103
A General Energy Balance for Battery Systems
Bernardi, D., Pawlikowski, E., & Newman, J. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2113792 · Cited by 2,548 · cited 1×
“[5] to predict the heat generation of LIBs via a thermodynamic energy balance equation.”
A critical review of thermal issues in lithium-ion batteries
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515880 · Cited by 2,192
Abuse behavior of high-power, lithium-ion cells
Spotnitz, R., & Franklin, J. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00488-3 · Cited by 1,373
Safety mechanisms in lithium-ion batteries
Balakrishnan, P. G., Ramesh, R., & Prem Kumar, T. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.12.002 · Cited by 1,132
Wang, Q., Jiang, B., Li, B., & Yan, Y. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.05.033 · Cited by 1,083
Feng, X., Fang, M., He, X., Ouyang, M., Lu, L., Wang, H., & Zhang, M. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.005 · Cited by 918
A three-dimensional thermal abuse model for lithium-ion cells
Kim, G.-H., Pesaran, A., & Spotnitz, R. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.04.018 · Cited by 877
In-operando high-speed tomography of lithium-ion batteries during thermal runaway
Finegan, D. P., Scheel, M., Robinson, J. B., Tjaden, B., Hunt, I., Mason, T. J., Millichamp, J., Di Michiel, M., Offer, G. J., Hinds, G., et al. (2015) · Nature Communications · doi:10.1038/ncomms7924 · Cited by 844
In situ NMR observation of the formation of metallic lithium microstructures in lithium batteries
Bhattacharyya, R., Key, B., Chen, H., Best, A. S., Hollenkamp, A. F., & Grey, C. P. (2010) · Nature Materials · doi:10.1038/nmat2764 · Cited by 813
Reciprocating air flow for Li-ion battery thermal management to improve temperature uniformity
Mahamud, R., & Park, C. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.02.076 · Cited by 787
Thermal-Electrochemical Modeling of Battery Systems
Gu, W. B., & Wang, C. Y. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393625 · Cited by 746
Sabbah, R., Kizilel, R., Selman, J. R., & Al-Hallaj, S. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.03.082 · Cited by 680
A Novel Thermal Management System for Electric Vehicle Batteries Using Phase-Change Material
Hallaj, S. A., & Selman, J. R. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393888 · Cited by 662
Thermal Model of Cylindrical and Prismatic Lithium-Ion Cells
Hatchard, T. D., MacNeil, D. D., Basu, A., & Dahn, J. R. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1377592 · Cited by 624
Feng, X., Sun, J., Ouyang, M., Wang, F., He, X., Lu, L., & Peng, H. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.017 · Cited by 589
Arora, P., Doyle, M., & White, R. E. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1392512 · Cited by 586 · cited 1×
“[48] revealed that overcharge of the negative electrode that causes lithium deposition would greatly decrease the cycle life of LIBs and pose serious safety hazard, and accordingly proposed a model to predict lithium deposition on the negative electrode during charge/overcharge.”
BackgroundDesign optimization of electric vehicle battery cooling plates for thermal performance
Jarrett, A., & Kim, I. Y. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.06.090 · Cited by 560
An alternative cooling system to enhance the safety of Li-ion battery packs
Kizilel, R., Sabbah, R., Selman, J. R., & Al-Hallaj, S. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.06.074 · Cited by 513
Experimental investigation on thermal management of electric vehicle battery with heat pipe
Rao, Z., Wang, S., Wu, M., Lin, Z., & Li, F. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2012.08.014 · Cited by 486
Wilke, S., Schweitzer, B., Khateeb, S., & Al-Hallaj, S. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.11.018 · Cited by 475
A 3D thermal runaway propagation model for a large format lithium ion battery module
Feng, X., Lu, L., Ouyang, M., Li, J., & He, X. (2016) · Energy · doi:10.1016/j.energy.2016.08.094 · Cited by 466
Feng, X., He, X., Ouyang, M., Lu, L., Wu, P., Kulp, C., & Prasser, S. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.04.118 · Cited by 458
Analysis of Electrochemical and Thermal Behavior of Li-Ion Cells
Srinivasan, V., & Wang, C. Y. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1526512 · Cited by 435
Khateeb, S. A., Amiruddin, S., Farid, M., Selman, J. R., & Al-Hallaj, S. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.09.033 · Cited by 410
Modeling and short circuit detection of 18650 Li-ion cells under mechanical abuse conditions
Sahraei, E., Campbell, J., & Wierzbicki, T. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.07.057 · Cited by 401
Ultra-thin minichannel LCP for EV battery thermal management
Jin, L. W., Lee, P. S., Kong, X. X., Fan, Y., & Chou, S. K. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.07.013 · Cited by 393
Online internal short circuit detection for a large format lithium ion battery
Feng, X., Weng, C., Ouyang, M., & Sun, J. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.10.019 · Cited by 383
Overcharge reaction of lithium-ion batteries
Ohsaki, T., Kishi, T., Kuboki, T., Takami, N., Shimura, N., Sato, Y., Sekino, M., & Satoh, A. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.03.105 · Cited by 382
Thermal Model for a Li-Ion Cell
Kumaresan, K., Sikha, G., & White, R. E. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2817888 · Cited by 382
Cai, L., & White, R. E. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.03.017 · Cited by 377
Heat dissipation design for lithium-ion batteries
Wu, M.-S., Liu, K. H., Wang, Y.-Y., & Wan, C.-C. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00048-4 · Cited by 373
Thermal Modeling of Porous Insertion Electrodes
Thomas, K. E., & Newman, J. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1531194 · Cited by 356
Analysis of internal short-circuit in a lithium ion cell
Santhanagopalan, S., Ramadass, P., & Zhang, J. (. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.05.002 · Cited by 351
Self-citationNonequilibrium Thermodynamics of Porous Electrodes
Ferguson, T. R., & Bazant, M. Z. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.048212jes · Cited by 333
Heat‐Generation Rate and General Energy Balance for Insertion Battery Systems
Rao, L., & Newman, J. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837884 · Cited by 333
Guo, G., Long, B., Cheng, B., Zhou, S., Xu, P., & Cao, B. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.10.090 · Cited by 322
Fang, W., Kwon, O. J., & Wang, C.-Y. (2010) · International Journal of Energy Research · doi:10.1002/er.1652 · Cited by 314
Internal short circuit in Li-ion cells
Maleki, H., & Howard, J. N. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.02.070 · Cited by 313
Internal short circuit detection for battery pack using equivalent parameter and consistency method
Ouyang, M., Zhang, M., Feng, X., Lu, L., Li, J., He, X., & Zheng, Y. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.06.087 · Cited by 309
Modeling for the scale-up of a lithium-ion polymer battery
Kim, U. S., Shin, C. B., & Kim, C.-S. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.10.019 · Cited by 308
Ye, J., Chen, H., Wang, Q., Huang, P., Sun, J., & Lo, S. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.08.124 · Cited by 304
Effect of electrode configuration on the thermal behavior of a lithium-polymer battery
Kim, U. S., Shin, C. B., & Kim, C.-S. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.09.054 · Cited by 292
Heat pipe with PCM for electronic cooling
Weng, Y.-C., Cho, H.-P., Chang, C.-C., & Chen, S.-L. (2011) · Applied Energy · doi:10.1016/j.apenergy.2010.12.004 · Cited by 291
Experimental investigation on the feasibility of heat pipe cooling for HEV/EV lithium-ion battery
Tran, T.-H., Harmand, S., Desmet, B., & Filangi, S. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.11.048 · Cited by 279
Arora, S., Shen, W., & Kapoor, A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.03.013 · Cited by 277
Ouyang, M., Ren, D., Lu, L., Li, J., Feng, X., Han, X., & Liu, G. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.01.051 · Cited by 271
Zhang, C., Santhanagopalan, S., Sprague, M. A., & Pesaran, A. A. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.04.162 · Cited by 257
Leising, R. A., Palazzo, M. J., Takeuchi, E. S., & Takeuchi, K. J. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1379740 · Cited by 253
Failure mechanism of Li-ion battery at overcharge conditions
Belov, D., & Yang, M.-H. (2008) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-007-0449-3 · Cited by 243
Multi-time-scale observer design for state-of-charge and state-of-health of a lithium-ion battery
Zou, C., Manzie, C., Nešić, D., & Kallapur, A. G. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.10.040 · Cited by 235
Electrochemical‐Calorimetric Studies of Lithium‐Ion Cells
Hong, J., Maleki, H., Al Hallaj, S., Redey, L., & Selman, J. R. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838509 · Cited by 234
Lee, K.-J., Smith, K., Pesaran, A., & Kim, G.-H. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.007 · Cited by 212
Characterization of large format lithium ion battery exposed to extremely high temperature
Feng, X., Sun, J., Ouyang, M., He, X., Lu, L., Han, X., Fang, M., & Peng, H. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.094 · Cited by 201
A Framework for Simplification of PDE-Based Lithium-Ion Battery Models
Zou, C., Manzie, C., & Nesic, D. (2016) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2015.2502899 · Cited by 196
Modelling the thermal behaviour of a lithium-ion battery during charge
Kim, U. S., Yi, J., Shin, C. B., Han, T., & Park, S. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.01.103 · Cited by 195
Heat Transfer Phenomena in Lithium/Polymer‐Electrolyte Batteries for Electric Vehicle Application
Chen, Y., & Evans, J. W. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2220724 · Cited by 194
Modeling Nail Penetration Process in Large-Format Li-Ion Cells
Zhao, W., Luo, G., & Wang, C.-Y. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.1071501jes · Cited by 187
Fang, W., Ramadass, P., & Zhang, Z. (. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.10.004 · Cited by 177
Calculation of the state of safety (SOS) for lithium ion batteries
Castillo, E. C., Niedermeier, F., & Jossen, A. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.05.068 · Cited by 174
An electrochemical modeling of lithium-ion battery nail penetration
Chiu, K.-C., Lin, C.-H., Yeh, S.-F., Lin, Y.-H., & Chen, K.-C. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.069 · Cited by 159
Simultaneous estimation of thermal parameters for large-format laminated lithium-ion batteries
Zhang, J., Wu, B., Li, Z., & Huang, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.079 · Cited by 157
Self-citationExperimental and theoretical analysis of a method to predict thermal runaway in Li-ion cells
Shah, K., Chalise, D., & Jain, A. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.08.133 · Cited by 155
Experimental investigation of a pulsating heat pipe for hybrid vehicle applications
Burban, G., Ayel, V., Alexandre, A., Lagonotte, P., Bertin, Y., & Romestant, C. (2012) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.05.037 · Cited by 153
Controls oriented reduced order modeling of lithium deposition on overcharge
Perkins, R. D., Randall, A. V., Zhang, X., & Plett, G. L. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.03.003 · Cited by 153
An Approach for Designing Thermal Management Systems for Electric and Hybrid Vehicle Battery Packs
Pesaran, A. A., Keyser, M. A., & Burch, S. D. (1999) · University of North Texas Digital Library (University of North Texas) · Cited by 153
Characterization of commercial Li-ion batteries using electrochemical–calorimetric measurements
Al‐Hallaj, S., Prakash, J., & Selman, J. R. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00472-3 · Cited by 145
Thermal behavior and electrochemical heat generation in a commercial 40 Ah lithium ion pouch cell
Schuster, E., Ziebert, C., Melcher, A. M., Rohde, M., & Seifert, H. J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.03.170 · Cited by 137
Influence of Some Design Variables on the Thermal Behavior of a Lithium‐Ion Cell
Botte, G. G., Johnson, B. A., & White, R. E. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1391700 · Cited by 132
Thermal Evaluation of Toyota Prius Battery Pack
Zolot, M., Pesaran, A. A., & Mihalic, M. (2002) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2002-01-1962 · Cited by 123
Al‐Hallaj, S., Venkatachalapathy, R., Prakash, J., & Selman, J. R. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393549 · Cited by 121
In situ high-energy X-ray diffraction to study overcharge abuse of 18650-size lithium-ion battery
Lin, C., Ren, Y., Amine, K., Qin, Y. F., & Chen, Z. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.032 · Cited by 118
Wu, M.-S., Chiang, P.-C. J., Lin, J.-C., & Jan, Y.-S. (2004) · Electrochimica Acta · doi:10.1016/j.electacta.2003.12.012 · Cited by 117
Modeling Internal Shorting Process in Large-Format Li-Ion Cells
Zhao, W., Luo, G., & Wang, C.-Y. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.1031507jes · Cited by 116
Zhang, J., Huang, J. Z., Li, Z., et al. (2014) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-014-3672-z · Cited by 105
Self-citationPrecise Electrochemical Calorimetry of LiCoO[sub 2]/Graphite Lithium-Ion Cell
Kobayashi, Y., Miyashiro, H., Kumai, K., Takei, K., Iwahori, T., & Uchida, I. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1487833 · Cited by 92
In Situ Measurements of Heat Generation in a Li/Mesocarbon Microbead Half-Cell
Lu, W., & Prakash, J. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1541672 · Cited by 85
Lu, W., Yang, H., & Prakash, J. (2005) · Electrochimica Acta · doi:10.1016/j.electacta.2005.06.028 · Cited by 67
Development of a simulator for both property and safety of a lithium secondary battery
Yamauchi, T., Mizushima, K., Satoh, Y., & Yamada, S. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.05.011 · Cited by 63
Downie, L. E., & Dahn, J. R. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0301412jes · Cited by 57
Sherfey, J. M., & Brenner, A. (1958) · Journal of The Electrochemical Society · doi:10.1149/1.2428687 · Cited by 55
Catastrophe analysis of cylindrical lithium ion battery
Wang, Q., Ping, P., & Sun, J. (2010) · Nonlinear Dynamics · doi:10.1007/s11071-010-9685-7 · Cited by 52
A simulation on safety of LiFePO4/C cell using electrochemical–thermal coupling model
Wang, S., Lu, L., & Liu, X. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.100 · Cited by 51
Bang, H., Yang, H., Sun, Y., et al. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1851035 · Cited by 50
Modeling the Behavior of Electroactive Polymers for Overcharge Protection of Lithium Batteries
Thomas‐Alyea, K. E., Newman, J., Chen, G., & Richardson, T. J. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1649232 · Cited by 49
Downie, L. E., Hyatt, S. R., Wright, A. T. B., & Dahn, J. R. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp508912z · Cited by 46
Electrochemical and calorimetric approach to spinel lithium manganese oxide
Kobayashi, Y., Kihira, N., Takei, K., et al. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00203-7 · Cited by 40
The Impact of Electrolyte Additives Determined Using Isothermal Microcalorimetry
Downie, L. E., Nelson, K. J., Petibon, R., Chevrier, V. L., & Dahn, J. R. (2013) · ECS Electrochemistry Letters · doi:10.1149/2.010310eel · Cited by 40
Contribution to the Study of Electric Arcs in Lithium-Ion Batteries
Augeard, A., Singo, T., Desprez, P., & Abbaoui, M. (2016) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2016.2549502 · Cited by 23
PDE battery model simplification for SOC and SOH estimator design
Zou, C., Kallapur, A. G., Manzie, C. G., & Nešić, D. (2015) · IEEE Conference on Decision and Control (CDC) · doi:10.1109/cdc.2015.7402395 · Cited by 21
Heat pipes for thermal control of ISS solar battery drive
Barantsevich, V., & Shabalkin, V. (2003) · Applied Thermal Engineering · doi:10.1016/s1359-4311(03)00041-3 · Cited by 14
Electric Vehicle Battery Thermal Issues and Thermal Management Techniques (Presentation)
Rugh, J. P., Pesaran, A. A., & Smith, K. A. (2013) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Cited by 9
Cited by
A review of lithium ion battery failure mechanisms and fire prevention strategies
Wang, Q., Mao, B., Stoliarov, S. I., & Sun, J. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.03.002 · Cited by 1,755
How, D. N. T., Hannan, M. A., Hossain Lipu, M. S., & Ker, P. J. (2019) · IEEE Access · doi:10.1109/access.2019.2942213 · Cited by 812
Overview of batteries and battery management for electric vehicles
Liu, W., Placke, T., & Chau, K. T. (2022) · Energy Reports · doi:10.1016/j.egyr.2022.03.016 · Cited by 715
Immersion cooling for lithium-ion batteries – A review
Roe, C., Feng, X., White, G., Li, R., Wang, H., Rui, X., Li, C., Zhang, F., Null, V., Parkes, M., et al. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.231094 · Cited by 590
Hossain Lipu, M. S., Hannan, M. A., Karim, T. F., Hussain, A., Saad, M. H. M., Ayob, A., Miah, M. S., & Indra Mahlia, T. M. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126044 · Cited by 446
Metadata
- Authors
- Zhang, J., Zhang, L., Sun, F., & Wang, Z.
- Venue
- IEEE Access
- Published
- 2018
- Volume
- 6
- Pages
- 23848-23863
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W2802327240
- Cited by
- 344
- References
- 93
- FWCI
- 9.98
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.