CoChat

A Method for Validating CubeSat Satellite EPS Through Power Budget Analysis Aligned With Mission Requirements

Open access
Acero, Ignacio F., Diaz, Jonathan, Hurtado-Velasco, Ronald, Bautista, Sergio Ramiro Gonzalez, Rincón, Sonia, Hernández, Francisco L., Rodriguez-Ferreira, Julian, Gonzalez-Llorente, Jesus · 2023 · IEEE Access

The DOI matches its Crossref record; 18 of the 21 references it cites were found in a registry or an index; 1 of the 16 sources its claims cite were checked for support.

Abstract

The approach determines the power and energy for the operational modes and scenarios and evaluates the battery depth of discharge and charge/discharge cycles.

Overview

CoChat Summary

## TL;DR

The paper proposes a five-step method to validate a CubeSat electrical power system (EPS) by linking power-budget analysis to mission requirements, modes, and scenarios. In the LEOPAR 3U CubeSat case study, the method found that the EPS can meet mission power and energy needs, with a selected battery depth of discharge (DoD) of 20%.

## Key findings

  • The proposed method uses five steps: preliminary power budget, power/energy of operation modes, scenario energy, indicator definition, and EPS validation.
  • For the LEOPAR 3U CubeSat case study, the orbital period was 95.50 min (1.59 h), split into 47.75 min sun time and 47.75 min eclipse time; MATLAB simulations estimated energy generation of 26.19 Wh/orbit with the satellite facing nadir and 48.01 Wh/orbit with the panels facing the sun.
  • The platform battery bank is a Li-Ion 2S3P bank with maximum voltage 8.26 V and capacity 3.8 Ah (30 Wh); the paper states a minimum required capacity of 23.89 Wh and a 20% DoD gives a battery life of 5.4 years.
  • In validation, the maximum power required across operating modes was 18.36 W, which the VBATT bus can supply up to 30 W; the release scenario consumed 13.28 Wh and corresponded to 49.19% battery discharge.

## Methods

  • Design: a five-step EPS validation method grounded in power budget analysis and aligned with mission definition, architecture, and high-level requirements.
  • Data/sample: a case study of the LEOPAR mission, a 3U CubeSat with a 550 km sun-synchronous orbit, hyperspectral payload, and COTS MISC-3 platform components.
  • Analysis: the paper calculates generation, distribution, demand, storage, mode-level power/energy, scenario-level battery discharge, and DoD thresholds, then checks whether generated/stored energy and bus power ratings satisfy the mission modes.

## Limitations

  • The paper explicitly notes that further research could extend the method to include EPS modeling and development of energy management software.
  • The validation is demonstrated on a single case study (LEOPAR), so broader generalization beyond this mission is not directly shown in the text.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1109/access.2023.3271596

Cites

18 of 18 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Verification

Claims the paper makes

1 Valid · 6 Not valid · 17 Not checked · 56 Own results and interpretations

43 more claims

Create a free account to see all 80 claims and to verify the 2 references still open.

See all claims — free account
  • It may state two separate claims as one. 18
  • The quote only partly states this claim. 2
  • Probably not a substantial claim. 22

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

1 of 1

Citations

Cites

Show all 18 references

Research works printed but not linked: 13

  1. rossi, 2013, The SwissCube’s technologies results after four years of flight, Proc 13th Int Astron Conf, 23
  2. 2022, GPSRM 1 GNSS Receiver Module
  3. 2015, HiSPiCO S Band Transmitter for Small Satellites Highly Integrated S Band Transmitter
  4. 2022, Dragonfly Aerospace MANTIS IMAGER High-Performance Mantis Camera Systems for CubeSats
  5. 2016, MAI-400 1/2U CubeSat ADACS
  6. 2022, Custom PMDSAS Panel Deployable Per Cell
  7. 2013, User Manual Standalone 30 Wh Battery
  8. 2013, User Manual CS-XUEPS2-60 FleXU CubeSat Electronic Power System Part # 01–00732 and 01-01120 USM-01-00732 Issue C
  9. rodriguez-ferreira, 2021, MISC-3 a Colombian CubeSat 3U for Earth observing applications, Proc 72nd Int Astron Congr (IAC), 1
  10. 2013, MISC 3 CubeSat-class Payload Carrier Nanosatellite Assembly User Manual Revision B
  11. 2009, Motherboard (MB)
  12. 2010, Pluggable Processor Module (PPM) D1
  13. 2020, Radio Host Module 1 (RHM 1) With Globalstar Simplex and/or AstroDev Lithium-2—UM34 User Manual

Cited by

See all 24

Metadata

Authors
Acero, I. F., Diaz, J., Hurtado-Velasco, R., Bautista, S. R. G., Rincón, S., Hernández, F. L., Rodriguez-Ferreira, J., & Gonzalez-Llorente, J.
Affiliations
  • Universidad Sergio Arboleda (CO)
  • Ingeniería Electrónica, Escuela de Ciencias Exactas e Ingeniería, Universidad Sergio Arboleda, Bogota, Colombia
  • Centro de Investigación en Tecnologías Aeroespaciales (CITAE), Cali, Colombia
  • Universidad del Valle (CO)
  • Universidad Industrial de Santander (CO)
Venue
IEEE Access
Published
2023
Volume
11
Pages
43316-43332
ISSN
2169-3536 (ISSN-L)
OpenAlex
W4367333189
Cited by
24
References
21
Citations by year
2026: 8 · 2025: 12 · 2024: 3 · 2023: 1
FWCI
2.92
Type
journal article
Language
en
Open access
Locations
  • IEEE Access (publishedVersion, cc-by-nc-nd)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • Espace ÉTS (ETS) (submittedVersion)
Funders
  • Government of Colombia through the Ministry of Science, Technology and Innovation
  • Colombian Air Force (75079)
Topics
  • Physical Sciences › Engineering › Aerospace Engineering › Spacecraft Design and Technology
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Space Technology and Applications
  • Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
Keywords
CubeSat, power systems, power budget analysis, commercial off-the-shelf components, battery depth of discharge, charge-discharge cycling, operating modes, small satellites, mission requirements

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (qwen3.8-omni-flash).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: A Method for Validating CubeSat Satellite EPS Through Power Budget Analysis Aligned With Mission Requirements. https://app.cochat.ai/papers/10.1109/access.2023.3271596
The paper
Acero, I. F., Diaz, J., Hurtado-Velasco, R., Bautista, S. R. G., Rincón, S., Hernández, F. L., Rodriguez-Ferreira, J., & Gonzalez-Llorente, J. (2023). A Method for Validating CubeSat Satellite EPS Through Power Budget Analysis Aligned With Mission Requirements. IEEE Access. https://doi.org/10.1109/access.2023.3271596

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.