Fault detection of eccentricity and bearing damage in a PMSM by means of wavelet transforms decomposition of the stator current
The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Abstract
This paper presents the study of permanent magnet synchronous machines (PMSM) running with eccentricity and bearings damage. The objective is to detect and identify the fault through the current signature analysis. The stator current has been analyzed by means of both Fourier (FFT) and Discrete Wavelet (DWT) transforms. Simulations have been carried out with a two-dimensional (2-D) finite element analysis (FEA), and they have been also compared with experiments. The results prove that the method proposed can be used to identify mechanical faults in a PMSM.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The basic diagnostic signals in eccentricity diagnosis are: stator current [135], [143]- [146], [150], [151], [156]- [159], [161], [162], mechanical vibrations [149], [155], [156], noise [155], an airgap search coil voltage [149], [152], [156], [160], stator voltage [159], speed [159], load torque [159], d-axis stator inductance Ld [147], [148], BEMF [160] and unbalanced magnetic pull [153], [154]”
From Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges (2022) · cites this paper as [135]
Citations
Cites
A Wavelet Tour of Signal Processing
(1999) · Elsevier eBooks · doi:10.1016/b978-0-12-466606-1.x5000-4 · Cited by 16,227 · cited 1×
“The wavelet approach is essentially an adjustable window Fourier spectral analysis with the following general definition [13] is continuous Wavelet transforms (CWT):”
BackgroundCondition Monitoring and Fault Diagnosis of Electrical Motors—A Review
Nandi, S., Toliyat, H. A., & Li, X. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2005.847955 · Cited by 2,382 · cited 5×
“On the other hand, dynamic eccentricity can be caused by misalignment of bearings, mechanical resonance at critical speeds, a bent rotor shaft, wear of bearings, and others reasons [2, 3]. In reality, both static and dynamic eccentricities tend to coexist [ 4 ].”
BackgroundMethodInfluentialA review of induction motors signature analysis as a medium for faults detection
El Hachemi Benbouzid, M. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873206 · Cited by 1,602
Pillay, P., & Krishnan, R. (1989) · IEEE Transactions on Industry Applications · doi:10.1109/28.25541 · Cited by 920 · cited 1×
“In addition, the equation used to solve the rotor speed, ωr, is well-known and given as [23]:”
MethodCondition monitoring and fault diagnosis of electrical machines-a review
Nandi, S., & Toliyat, H. A. (2003) · Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370) · doi:10.1109/ias.1999.799956 · Cited by 531 · cited 2×
“Apart from normal internal operating stresses, other causes of bearing damages due to vibration, inherent eccentricity, and bearing currents [5] due to solid state drives appear as well.”
BackgroundNandi, S., Ahmed, S., & Toliyat, H. A. (2001) · IEEE Transactions on Energy Conversion · doi:10.1109/60.937205 · Cited by 340
Nandi, S., Ahmed, S., & Toliyat, H. (2001) · IEEE Power Engineering Review · doi:10.1109/mper.2001.4311622 · Cited by 298 · cited 1×
“Also, Nandi et al. [ 14 ], and Ferrah et al. [15] shows that only a particular combination of machine pole pairs and rotor slot number will give rise to significant only static or only dynamic eccentricity-related components.”
BackgroundStack, J. R., Habetler, T. G., & Harley, R. G. (2004) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2004.827454 · Cited by 290 · cited 2×
“The characteristic fault frequencies are the result of the absolute motion (vibration) of the machine [17].”
BackgroundYazici, B., & Kliman, G. B. (1999) · IEEE Transactions on Industry Applications · doi:10.1109/28.753640 · Cited by 266 · cited 1×
“[20, 21] have reported an adaptive, statistical time frequency method for the detection of bearing faults.”
MethodAn Amplitude Modulation Detector for Fault Diagnosis in Rolling Element Bearings
Stack, J. R., Harley, R. G., & Habetler, T. G. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2004.834971 · Cited by 224 · cited 1×
“As with the air-gap eccentricity, these variations generate stator currents at frequencies given by [18, 19].”
Background
Cited by
Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges
Orlowska-Kowalska, T., Wolkiewicz, M., Pietrzak, P., Skowron, M., Ewert, P., Tarchala, G., Krzysztofiak, M., & Kowalski, C. T. (2022) · IEEE Access · doi:10.1109/access.2022.3180153 · Cited by 328
“[116], [131], [132], [135]-[137] Stator current FFT fb =fs±kfu fu – characteristic failure frequency of the bearing k=1,2,3.”
BackgroundMethodInfluentialHong, J., Park, S., Hyun, D., Kang, T.-J., Lee, S. B., Kral, C., & Haumer, A. (2012) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2012.2191253 · Cited by 219
“Therefore, there has been a lot of research activity in the last 5-6 years on developing techniques for detecting PM demagnetization and eccentricity faults for improving the performance, reliability, and efficiency of PMSM drive systems [ 4-10 ].”
BackgroundMethodInfluentialFaults and Diagnosis Methods of Permanent Magnet Synchronous Motors: A Review
Chen, Y., Liang, S., Li, W., Liang, H., & Wang, C. (2019) · Applied Sciences · doi:10.3390/app9102116 · Cited by 194
“And they also focused on mechanical faults [70].”
BackgroundHaddad, R. Z., & Strangas, E. G. (2016) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2016.2558183 · Cited by 158
“These methods can be categorized as: time domain methods, frequency analysis methods as in [1]–[5], and time scale analysis methods such as discrete or continuous wavelet transform (D/CWT) [6], [7].”
BackgroundMethodPark, Y., Fernandez, D., Lee, S. B., Hyun, D., Jeong, M., Kommuri, S. K., Cho, C., Diaz Reigosa, D., & Briz, F. (2019) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2018.2886772 · Cited by 116
“operating under non-stationary conditions, where the input frequency or load varies [9], [10].”
Background
Metadata
- Authors
- Rosero, J., Romeral, J. L., Cusido, J., Ortega, J. A., & Garcia, A.
- Affiliations
- Universitat Politècnica de Catalunya (ES)
- ORCID
- Ortega, J. A.
- Venue
- 2008 Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition
- Publisher
- IEEE
- Published
- 2008-02
- Pages
- 111-116
- ISSN
- 1048-2334 (ISSN-L)
- OpenAlex
- W2111065160
- Cited by
- 44
- References
- 25
- Citations by year
- 2025: 1 · 2024: 4 · 2023: 5 · 2022: 2 · 2020: 6 · 2019: 5 · 2018: 3 · 2017: 3 · 2016: 3 · 2015: 1 · 2014: 2 · 2013: 3 · 2012: 3
- FWCI
- 1.70
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition (publishedVersion)
- TECNALIA Publications (Fundación TECNALIA Research & Innovation) (submittedVersion, public-domain)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Motor Design and Analysis
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Sensorless Control of Electric Motors
- Keywords
- permanent magnet synchronous motor, fault detection, rotor eccentricity, bearing damage, discrete wavelet transform, current harmonics, mechanical fault diagnosis
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fault detection of eccentricity and bearing damage in a PMSM by means of wavelet transforms decomposition of the stator current. https://app.cochat.ai/papers/10.1109/apec.2008.4522708
- The paper
- Rosero, J., Romeral, J. L., Cusido, J., Ortega, J. A., & Garcia, A. (2008). Fault detection of eccentricity and bearing damage in a PMSM by means of wavelet transforms decomposition of the stator current. 2008 Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition. https://doi.org/10.1109/apec.2008.4522708
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.