A phase shifted semi-bridgeless boost power factor corrected converter for plug in hybrid electric vehicle battery chargers
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
In this paper, a phase shifted semi-bridgeless boost power factor corrected converter is proposed for plug in hybrid electric vehicle battery chargers. The converter features high efficiency at light loads and low lines, which is critical to minimize the charger size, charging time and the amount and cost of electricity drawn from the utility; the component count, which reduces the charger cost; and reduced EMI. The converter is ideally suited for automotive level I residential charging applications. A detailed converter description and steady state operation analysis of this converter is presented. Experimental results of a prototype boost converter, converting universal AC input voltage to 400 V DC at 3.4 kW are given and the results are compared to an interleaved boost converter to verify the proof of concept, and analytical work reported. The results show a power factor greater than 0.99 from 750 W to 3.4 kW, THD less than 5% from half load to full load and a peak efficiency of 98.6 % at 240 V input and 1000 W load.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Review of Three-Phase Improved Power Quality AC–DC Converters
Singh, B., Singh, B. N., Chandra, A., Al-Haddad, K., Pandey, A., & Kothari, D. P. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2004.825341 · Cited by 1,728
A review of single-phase improved power quality ac~dc converters
Singh, B., Singh, B. N., Chandra, A., Al-Haddad, K., Pandey, A., & Kothari, D. P. (2003) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.817609 · Cited by 1,297 · cited 1×
“At the same time, power factor correction is achieved [4].”
Advanced Integrated Bidirectional AC/DC and DC/DC Converter for Plug-In Hybrid Electric Vehicles
Lee, Y.-J., Khaligh, A., & Emadi, A. (2009) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2009.2028070 · Cited by 476
Cited by
Khaligh, A., & Dusmez, S. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2213104 · Cited by 630
Acharige, S. S. G., Haque, M. E., Arif, M. T., Hosseinzadeh, N., Hasan, K. N., & Oo, A. M. T. (2023) · IEEE Access · doi:10.1109/access.2023.3267164 · Cited by 590
Khalid, M. R., Khan, I. A., Hameed, S., Asghar, M. S. J., & Ro, J. (2021) · IEEE Access · doi:10.1109/access.2021.3112189 · Cited by 353
A Review on Electric Vehicle Charging Infrastructure Development in the UK
Chen, T., Zhang, X.-P., Wang, J., Li, J., Wu, C., Hu, M., & Bian, H. (2020) · Journal of Modern Power Systems and Clean Energy · doi:10.35833/mpce.2018.000374 · Cited by 315
Evaluation and Efficiency Comparison of Front End AC-DC Plug-in Hybrid Charger Topologies
Musavi, F., Edington, M., Eberle, W., & Dunford, W. G. (2012) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2011.2166413 · Cited by 296
Self-citation
Metadata
- Authors
- Musavi, F., Eberle, W., & Dunford, W. G.
- Venue
- 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC)
- Publisher
- IEEE
- Published
- 2011-03
- Pages
- 821-828
- ISSN
- 1048-2334 (ISSN-L)
- OpenAlex
- W2147522709
- Cited by
- 60
- References
- 3
- FWCI
- 9.13
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.