Comparative Examination on Architecture and Protocol of Industrial Wireless Sensor Network Standards
The DOI matches its Crossref record; 133 of the 138 references it cites were found in a registry or an index.
Abstract
This paper discusses key aspects of the four most popular industrial wireless sensor network standards: ZigBee, WirelessHART, ISA100.11a, and WIA-PA. The detailed design and protocol architectures are comparatively examined. The uniqueness of each standard is highlighted and justifications for their design are provided. Similarities and differences among these standards at each protocol layer are compared. With consideration of the scopes and the limitations of these standards, the suitability of these standards to meet the industrial requirements has also been examined.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The IEEE working group (WG) [36,37,38,60,61] are actively working on improvements and standardization of communication technologies supporting IIoT use cases.”
From Industrial IoT, Cyber Threats, and Standards Landscape: Evaluation and Roadmap (2021) · cites this paper as [37]
In the citing paper
“This can be accomplished by implementing industrial blockchain technology to meet the required levels of security, openness, and decentralization [37].”
From Industrial IoT, Cyber Threats, and Standards Landscape: Evaluation and Roadmap (2021) · cites this paper as [37]
Citations
Cites
Ad hoc On-Demand Distance Vector (AODV) Routing
Perkins, C., Belding-Royer, E., & Das, S. (2003) · doi:10.17487/rfc3561 · Cited by 10,686 · cited 1×
“a) ZigBee: The ZigBee standard provides two different routing schemes: tree routing [80], [81] and ad hoc on-demand distance vector (AODV) routing [82], [83].”
BackgroundWireless sensor network survey
Yick, J., Mukherjee, B., & Ghosal, D. (2008) · Computer Networks · doi:10.1016/j.comnet.2008.04.002 · Cited by 6,255
Wireless sensor networks for habitat monitoring
Mainwaring, A., Culler, D., Polastre, J., Szewczyk, R., & Anderson, J. (2002) · Proceedings of the 1st ACM international workshop on Wireless sensor networks and applications · doi:10.1145/570738.570751 · Cited by 4,166 · cited 1×
“During the past decade, WSNs had found their way into a wide variety of applications [3], such as health monitoring of civil infrastructures [4], personal health monitoring [5], smart grid [6], agriculture [7], habitat monitoring [8], and industrial automation [9].”
BackgroundWireless mesh networks: a survey
Akyildiz, I. F., Wang, X., & Wang, W. (2005) · Computer Networks · doi:10.1016/j.comnet.2004.12.001 · Cited by 4,007 · cited 1×
“Meanwhile, the mesh topology is associated with some intelligence (such as self-forming, self-healing, and self-organization) [97], in order to provide more benefits, such as flexible network architecture, easy deployment and configuration, fault tolerance, and”
BackgroundSensor networks: Evolution, opportunities, and challenges
Chong, C.-Y., & Kumar, S. P. (2003) · Proceedings of the IEEE · doi:10.1109/jproc.2003.814918 · Cited by 3,079 · cited 1×
“The design of a WSN depends significantly on the requirements of particular applications [2], since different applications may have different requirements and objectives.”
BackgroundIndustrial Wireless Sensor Networks: Challenges, Design Principles, and Technical Approaches
Gungor, V. C., & Hancke, G. P. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2015754 · Cited by 1,669 · cited 2×
“Unlike office networks, an industrial environment is prone to unpredictable variations in temperature, pressure, humidity, vibrations, and the presence of heavy metal objects [9].”
BackgroundPerformance comparison of two on-demand routing protocols for ad hoc networks
Perkins, C. E., Royer, E. M., Das, S. R., & Marina, M. K. (2001) · IEEE Personal Communications · doi:10.1109/98.904895 · Cited by 1,491
Opportunities and Challenges of Wireless Sensor Networks in Smart Grid
Gungor, V. C., Lu, B., & Hancke, G. P. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2039455 · Cited by 1,368 · cited 1×
“During the past decade, WSNs had found their way into a wide variety of applications [3], such as health monitoring of civil infrastructures [4], personal health monitoring [5], smart grid [6], agriculture [7], habitat monitoring [8], and industrial automation [9].”
BackgroundWireless sensor networks for personal health monitoring: Issues and an implementation
Milenković, A., Otto, C., & Jovanov, E. (2006) · Computer Communications · doi:10.1016/j.comcom.2006.02.011 · Cited by 1,023 · cited 1×
“During the past decade, WSNs had found their way into a wide variety of applications [3], such as health monitoring of civil infrastructures [4], personal health monitoring [5], smart grid [6], agriculture [7], habitat monitoring [8], and industrial automation [9].”
BackgroundTime synchronization in sensor networks: a survey
Sivrikaya, F., & Yener, B. (2004) · IEEE Network · doi:10.1109/mnet.2004.1316761 · Cited by 851 · cited 1×
“tion in a sensor network aims at providing a common time scale for local clocks within the nodes in the network [99].”
Background
Research works printed but not linked: 18
- 2005, IEEE Standard for Information Technology - Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 15 1 Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Wireless Personal Area Networks (WPANs)
- 2012, Global Industrial Automation—Research & Analytics
- 2014, Industrial Automation How the Internet of Things and Digitalization Change the Market and Drive Growth
- 0, WIA-PA Communication Network and Communication Profile
- 2007, ZigBee PRO Specification
- 2009, Wireless Systems for Industrial Automation Process Control and Related Applications
- 2006, IEEE 802 15 4-2006 Standard Part 15 4 Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low-Rate Wireless Personal Area Networks (LR-WPANs)
- 10.1002/wcm.976 · DOI
- hatler, 2015, Web Exclusive Industrial Wireless Sensor Networks Trends and Developments
- kinney, 0, ISA100 11a
- 10.1016/j.csi.2011.06.001 · DOI
- lei, 0, Research of industrial wireless network WIA-PA multi-path routing protocol WMDSR, Int Symp Computer Science and Society (ISCCS), 51
- 10.1109/wfcs.2008.4638746 · DOI · Paper page
- 0, The Technology Behind the ISA100 11a Standard—An Exploration
- 2007, HART Field Communication Protocol Specification
- 2012, Wireless Communications in Safety Systems
- mathur, 2014, Understanding Safety Integrity Level (SIL) and It’s Effects
- 2013, OneWireless
Cited by
Wireless Network Design for Control Systems: A Survey
Park, P., Coleri Ergen, S., Fischione, C., Lu, C., & Johansson, K. H. (2018) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2017.2780114 · Cited by 488
Digital Twin: A Comprehensive Survey of Security Threats
Alcaraz, C., & Lopez, J. (2022) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2022.3171465 · Cited by 340
Industrial Communication Systems and Their Future Challenges: Next-Generation Ethernet, IIoT, and 5G
Vitturi, S., Zunino, C., & Sauter, T. (2019) · Proceedings of the IEEE · doi:10.1109/jproc.2019.2913443 · Cited by 380
“[20] Q. Wang and J. Jiang, “Comparative examination on architecture and protocol of industrial wireless sensor network standards,” IEEE Commun.”
BackgroundInfluentialData Management in Industry 4.0: State of the Art and Open Challenges
Raptis, T. P., Passarella, A., & Conti, M. (2019) · IEEE Access · doi:10.1109/access.2019.2929296 · Cited by 232
“Reference [32] discusses key aspects of the four most popular industrial wireless sensor network standards:”
BackgroundThe Internet of Robotic Things: A review of concept, added value and applications
Simoens, P., Dragone, M., & Saffiotti, A. (2018) · International Journal of Advanced Robotic Systems · doi:10.1177/1729881418759424 · Cited by 233
“IoT protocols such as WirelessHart or Zigbee Pro were designed to address the industry concerns on reliability, security and cost.(105) When Figure 7.”
MethodComparison of the Device Lifetime in Wireless Networks for the Internet of Things
Morin, E., Maman, M., Guizzetti, R., & Duda, A. (2017) · IEEE Access · doi:10.1109/access.2017.2688279 · Cited by 210
“First, our paper goes beyond several existing comparisons of IoT technologies and PHY/MAC layers for sensor networks [9]–[13] that described the features of different solutions and their limitations without proposing a comparison on an equal basis.”
Unicast QoS Routing Algorithms for SDN: A Comprehensive Survey and Performance Evaluation
Guck, J. W., Van Bemten, A., Reisslein, M., & Kellerer, W. (2018) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2017.2749760 · Cited by 177
Industrial IoT, Cyber Threats, and Standards Landscape: Evaluation and Roadmap
Dhirani, L. L., Armstrong, E., & Newe, T. (2021) · Sensors · doi:10.3390/s21113901 · Cited by 172
“This can be accomplished by implementing industrial blockchain technology to meet the required levels of security, openness, and decentralization [37].”
BackgroundSensing, communication and security planes: A new challenge for a smart city system design
Habibzadeh, H., Soyata, T., Kantarci, B., Boukerche, A., & Kaptan, C. (2018) · Computer Networks · doi:10.1016/j.comnet.2018.08.001 · Cited by 129
Survey on Wireless Technology Trade-Offs for the Industrial Internet of Things
Seferagić, A., Famaey, J., Poorter, E. D., & Hoebeke, J. (2020) · Sensors · doi:10.3390/s20020488 · Cited by 122
“An overview of key issues and challenges of wireless technologies in industrial networks is surveyed in References [1,12–19].”
BackgroundNoor‐A‐Rahim, M., John, J., Firyaguna, F., Sherazi, H. H. R., Kushch, S., Vijayan, A., O’Connell, E., Pesch, D., O’Flynn, B., O’Brien, W., et al. (2022) · Sensors · doi:10.3390/s23010073 · Cited by 131
“Applications in process automation industries mainly involve monitoring and control of different fluids and their requirements can be broadly classified into three categories, namely monitoring, control and safety [59].”
Background5G Enabled Codesign of Energy-Efficient Transmission and Estimation for Industrial IoT Systems
Lyu, L., Chen, C., Zhu, S., & Guan, X. (2018) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2799685 · Cited by 112
“Maximum transmit power of sensor 10 dBm Maximum transmit power of edge estimator 20 dBm Number of channels 15 Bandwidth of each channel 2 MHz System update period 100 ms [34] Sampling interval of the estimator T 0.”
BackgroundMethodSurvey and systematic mapping of industrial Wireless Sensor Networks
Queiroz, D. V., de Alencar, M. S., Gomes, R. D., da Fonseca, I. E., & Benavente-Peces, C. (2017) · Journal of Network and Computer Applications · doi:10.1016/j.jnca.2017.08.019 · Cited by 105
Toward Real-Time Control in Future Wireless Networks: Communication-Control Co-Design
Zhao, G., Imran, M. A., Pang, Z., Chen, Z., & Li, L. (2019) · IEEE Communications Magazine · doi:10.1109/mcom.2018.1800163 · Cited by 93
“Conventional industrial wireless networks as summarized in [5], for example, Zigbee, Bluetooth, Wireless HART, and ISA-100.”
BackgroundFraga‐Lamas, P., Varela-Barbeito, J., & Fernández‐Caramés, T. M. (2021) · IEEE Access · doi:10.1109/access.2021.3119775 · Cited by 103
“11a or Wireless Network for Industrial Automation - Process Automation (WIA-PA) [25], or on Low-Power Wide-Area Network (LPWAN) solutions [26].”
BackgroundWIA-FA and Its Applications to Digital Factory: A Wireless Network Solution for Factory Automation
Liang, W. G., Zheng, M., Zhang, J., Shi, H., Yu, H., Yang, Y., Liu, S., Yang, W., & Zhao, X. (2019) · Proceedings of the IEEE · doi:10.1109/jproc.2019.2897627 · Cited by 95
Beyond 5G Wireless IRT for Industry 4.0: Design Principles and Spectrum Aspects
Berardinelli, G., Mahmood, N. H., Rodríguez, I., & Mogensen, P. (2018) · IEEE Globecom Workshops (GC Wkshps) · doi:10.1109/glocomw.2018.8644245 · Cited by 91
“However, these technologies operate in crowded unlicensed spectrum with unpredictable interference levels, and are not capable of supporting very high reliability and low latency applications [5].”
BackgroundMethodA D2D-Based Protocol for Ultra-Reliable Wireless Communications for Industrial Automation
Liu, L., & Yu, W. (2018) · IEEE Transactions on Wireless Communications · doi:10.1109/twc.2018.2836937 · Cited by 89
Heterogeneous and dependable networks in industry – A survey
Scanzio, S., Wiśniewski, Ł., & Gaj, P. (2021) · Computers in Industry · doi:10.1016/j.compind.2020.103388 · Cited by 92
Industrial IoT Monitoring: Technologies and Architecture Proposal
Raposo, D., Rodrigues, A., Sinche, S., Silva, J. S., & Boavida, F. (2018) · Sensors · doi:10.3390/s18103568 · Cited by 81
“On the other hand, IEEE 802.15.1 is the base technology for standards such as WISA [17] and WSAN-FA [9], widely used in factory automation applications in the areas of assembly process for automotive, consumer products and electronics [18].”
BackgroundMethodInfluentialA Survey on the Application of WirelessHART for Industrial Process Monitoring and Control
Devan, P. A. M., Hussin, F. A., Ibrahim, R., Bingi, K., & Khanday, F. A. (2021) · Sensors · doi:10.3390/s21154951 · Cited by 80
“Comprehensive studies of the existing IWSN communication protocol’s network architecture, design, and standardization can be found in [3,6,15–17].”
BackgroundMethodInfluentialHeterogeneous Network Access and Fusion in Smart Factory: A Survey
Xia, D., Jiang, C. S., Wan, J., Jin, J., Leung, V. C. M., & Martínez-García, M. (2022) · ACM Computing Surveys · doi:10.1145/3530815 · Cited by 78
“Wi-Fi Wi-Fi is based on the IEEE 802.11 standard, in which the maximum data transmission rate of the IEEE802.”
BackgroundInfluentialClock Skew Estimation for Timestamp-Free Synchronization in Industrial Wireless Sensor Networks
Wang, H., Yu, F. R., Li, M., & Zhong, Y. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2020.2975289 · Cited by 61
“2975289 adopted in media access control (MAC) layer of industrial wireless standards [3], e.”
BackgroundA LoRaWAN Multi-Technological Architecture for Construction Site Monitoring
Ragnoli, M., Colaiuda, D., Leoni, A., Ferri, G., Barile, G., Rotilio, M., Laurini, E., Berardinis, P. D., & Stornelli, V. (2022) · Sensors · doi:10.3390/s22228685 · Cited by 60
“They have been used for a variety of unique applications [16]: monitoring the environment [17], industrial control [18], health-related [19,20] and wearable applications [20,21], and early warning systems [22].”
BackgroundRaza, S., Faheem, M., & Guenes, M. (2019) · International Journal of Communication Systems · doi:10.1002/dac.4074 · Cited by 67
“60,68 Next, we give a brief discussion of each application category along with its traffic type.”
BackgroundWireless Avionics Intracommunications: A Survey of Benefits, Challenges, and Solutions
Park, P., Marco, P. D., Nah, J., & Fischione, C. (2020) · IEEE Internet of Things Journal · doi:10.1109/jiot.2020.3038848 · Cited by 59
“While the time slot and the channel allocation are the most critical task for real-time WAIC applications, the industrial wireless standards do not define any specific scheduling algorithms [31], [112], [113].”
BackgroundMethodInfluentialWang, H., Shao, L., Li, M., Wang, B., & Wang, P. (2018) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2799595 · Cited by 57
“11a [3], WirelessHART, and wireless network for industrial automation–process automation (WIA–PA) are domi-”
BackgroundCommunication–Control Co-Design in Wireless Networks: A Cloud Control AGV Example
Qiao, Y., Fu, Y., & Yuan, M. (2022) · IEEE Internet of Things Journal · doi:10.1109/jiot.2022.3211766 · Cited by 52
“As summarized in [2] and [3], conventional industrial networks, such as Bluetooth, wireless HART [4], WIA-PA [5], Zigbee, and ISA-100.”
BackgroundFarag, H. M., Gidlund, M., & Österberg, P. (2018) · IEEE Sensors Journal · doi:10.1109/jsen.2018.2793946 · Cited by 50
“According to the ISA100 committee, the traffic in process automation applications can be classified into safety, control and monitoring [4], in which the requirements on latency and”
MethodMillimeter-Wave Smart Antenna Solutions for URLLC in Industry 4.0 and Beyond
Jabbar, A., Abbasi, Q. H., Anjum, N., Kalsoom, T., Ramzan, N., Ahmed, S., Rafi-ul-Shan, P. M., Falade, O. P., Imran, M. A., & Rehman, M. U. (2022) · Sensors · doi:10.3390/s22072688 · Cited by 57
Zhang, W., Liu, Y., Han, G., Feng, Y., & Zhao, Y. (2018) · IEEE Access · doi:10.1109/access.2018.2866165 · Cited by 48
“IWSN applications for environmental sensing cover the problems of air, water (together with waster water) pollution, etc [4].”
BackgroundCommunications Security in Industry X: A Survey
Ahmad, I., Rodriguez, F., Kumar, T., Suomalainen, J., Jagatheesaperumal, S. K., Walter, S., Asghar, M. Z., Li, G., Papakonstantinou, N., Ylianttila, M., et al. (2024) · IEEE Open Journal of the Communications Society · doi:10.1109/ojcoms.2024.3356076 · Cited by 56
“Data can be generally classified into safety, monitoring, and control [24].”
BackgroundPriority-Aware Wireless Fieldbus Protocol for Mixed-Criticality Industrial Wireless Sensor Networks
Farag, H. M., Sisinni, E., Gidlund, M., & Österberg, P. (2018) · IEEE Sensors Journal · doi:10.1109/jsen.2018.2888729 · Cited by 43
“Data traffic in a typical industrial automation scenario can be classified into three categories: safety, control and monitoring [5], and their requirements and criticality vary accordingly.”
BackgroundMethodInfluentialA Survey on Industrial Internet With ISA100 Wireless
Raptis, T. P., Passarella, A., & Conti, M. (2020) · IEEE Access · doi:10.1109/access.2020.3019665 · Cited by 38
“3) WORKS ON COMPARISONS WITH WirelessHART AND OTHER STANDARDS [12] presents another, wider confrontation, among ISA100 Wireless, ZigBee, WirelessHART, and WIA-PA, the design and architecture of which are comparatively investigated.”
BackgroundMethodInfluentialLeveraging the Role of Dynamic Reconfigurable Antennas in Viewpoint of Industry 4.0 and Beyond
Jabbar, A., Jamshed, M. A., Abbasi, Q. H., Imran, M. A., & Rehman, M. U. (2023) · Research · doi:10.34133/research.0110 · Cited by 38
“[6,20] and Ref.”
BackgroundInfluentialWang, H., Gong, P., Yu, F. R., & Li, M. (2020) · IEEE Communications Letters · doi:10.1109/lcomm.2020.3019521 · Cited by 35
“11a (one of the most representative industrial wireless standards [9]).”
BackgroundOn the use of Wireless Sensor Networks in Preventative Maintenance for Industry 4.0
Catenazzo, D., OrFlynn, B., & Walsh, M. J. (2018) · International Conference on Sensing Technology · doi:10.1109/icsenst.2018.8603669 · Cited by 34
“[38]”
Mahmood, N. H., Atzeni, I., Jorswieck, E. A., & López, O. L. A. (2023) · Foundations and Trends® in Communications and Information Theory · doi:10.1561/0100000129 · Cited by 37
Opportunities and Challenges for Error Control Schemes for Wireless Sensor Networks: A Review
Kadel, R., Paudel, K., Guruge, D. B., & Halder, S. J. (2020) · Electronics · doi:10.3390/electronics9030504 · Cited by 35
“Some of the derived standards and their main features are summarised as follows [47,48]:”
BackgroundMovva, P., & Rao, P. T. (2018) · IEEE Access · doi:10.1109/access.2018.2888484 · Cited by 32
“Wireless sensor network is a typical wireless network with spatially distributed sensors that can communicate with each other through wireless links [1].”
BackgroundDSLs for Model Driven Development of Secure Interoperable Automation Systems with EdgeX Foundry
John, J., Ghosal, A., Margaria, T., & Pesch, D. (2021) · Forum on specification and Design Languages · doi:10.1109/fdl53530.2021.9568378 · Cited by 29
Mahmood, A., Hossain, M. M. A., Çavdar, Ç., & Gidlund, M. (2019) · IEEE Internet of Things Journal · doi:10.1109/jiot.2019.2895228 · Cited by 28
Feng, Y., Zhang, W., Han, G., Kang, Y., & Wang, J. (2020) · IEEE Sensors Journal · doi:10.1109/jsen.2020.2994113 · Cited by 24
“network life [10].”
Ademaj, F., Rzymowski, M., Bernhard, H.-P., Nyka, K., & Kulas, Ł. (2021) · IEEE Internet of Things Journal · doi:10.1109/jiot.2021.3075346 · Cited by 23
Industrial wireless: Problem space, success considerations, technologies, and future direction
Candell, R., & Kashef, M. (2017) · Resilience Week (RWS) · doi:10.1109/rweek.2017.8088661 · Cited by 23
“11a, and Zigbee provide support for large scale deployments; however, in such deployments, the network infrastructure must support the throughput load of the network and the scan rate requirements of the factory application [26].”
BackgroundThe Impact of Networking Protocols on Massive M2M Communication in the Industrial IoT
Gündoğan, C., Kietzmann, P., Lenders, M., Petersen, H., Frey, M., Schmidt, T. C., Shzu-Juraschek, F., & Wählisch, M. (2021) · IEEE Transactions on Network and Service Management · doi:10.1109/tnsm.2021.3089549 · Cited by 23
“…include monitoring and reporting of environmental and vital data of workers in harsh environments ( e.g., early responders), process regulation in manufacturing industries ( e.g., chemicals, gas, oil, minerals), and even factory automation using with control of robots ( e.g., assembly lines) [13].”
BackgroundAn Energy Efficient Routing Approach for Cloud-Assisted Green Industrial IoT Networks
Bhandari, K. S., & Cho, G. (2020) · Sustainability · doi:10.3390/su12187358 · Cited by 24
“4 because they require a dedicated physical layer, and it supports many commercial off-the-shelf chips [5].”
BackgroundIndustrial Wireless Automation: Overview and Evolution of WIA-PA
Valadão, Y. D. N., Künzel, G., Müller, I., & Pereira, C. E. (2018) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2018.06.257 · Cited by 21
Concept of Energy Efficient ESP32 Chip for Industrial Wireless Sensor Network
Gatial, E., Balogh, Z., & Hluchý, L. (2020) · IEEE International Conference on Intelligent Engineering Systems (INES) · doi:10.1109/ines49302.2020.9147189 · Cited by 21
“The adoption of WSNs in industrial applications requires consideration of parameters such as cost effectiveness, ease of use, network security, battery life, and connectivity [4] for connection of most popular industrial wireless sensor network standards and ZigBee, WirelessHART, ISA100.”
Analysis and Challenges in Wireless Networked Control System: A Survey
Hamdan, M. M., & Mahmoud, M. S. (2022) · International Journal of Robotics and Control Systems · doi:10.31763/ijrcs.v2i3.731 · Cited by 20
“A comparison between WSN standards applied in popular industry is provided in terms of design and architecture [46].”
BackgroundThe Potential of mmWaves in Smart Industry: Manufacturing at 60 GHz
Pielli, C., Ropitault, T., & Zorzi, M. (2018) · Lecture notes in computer science · doi:10.1007/978-3-030-00247-3_6 · Cited by 21
Dangana, M., Ansari, S., Asad, S. M., Hussain, S., & Imran, M. A. (2022) · Sensors · doi:10.3390/s22239039 · Cited by 23
“The data transferred by this type of traffic are also small in size [26].”
Adaptive and Beacon-based multi-channel protocol for Industrial Wireless Sensor Networks
Gomes, R. D., Benavente-Peces, C., da Fonseca, I. E., & de Alencar, M. S. (2019) · Journal of Network and Computer Applications · doi:10.1016/j.jnca.2019.01.025 · Cited by 19
The requirements for using wireless networks with AGV communication in an industry environment
Kampen, A.-L., Fojcik, M., Cupek, R., & Stój, J. (2021) · IEEE International Conference on Wireless and Mobile Computing, Networking and Communications (WiMob) · doi:10.1109/wimob52687.2021.9606399 · Cited by 19
Industrial Internet for intelligent manufacturing: past, present, and future
Xu, C., Yu, H., Jin, X. H., Xia, C., Li, D., & Zeng, P. (2024) · Frontiers of Information Technology & Electronic Engineering · doi:10.1631/fitee.2300806 · Cited by 19
“…WSAN-FA (wireless sensor actuator network for factory automation) (Liang W et al., 2011; Vitturi et al., 2013; Holfeld et al., 2016; Verhappen, 2016; Wang Q and Jiang, 2016; Pang et al., 2017; Wollschlaeger et al., 2017; Zheng et al., 2017; Huang et al., 2018; Xu C et al., 2021; Yu et al., 2022).”
REA-6TiSCH: Reliable Emergency-Aware Communication Scheme for 6TiSCH Networks
Farag, H. M., Grimaldi, S., Gidlund, M., & Österberg, P. (2020) · IEEE Internet of Things Journal · doi:10.1109/jiot.2020.3016643 · Cited by 18
“Unlike consumer applications where cost is often the most important attribute, low delay and high reliability are key features for industrial applications [2].”
BackgroundWang, H., Tan, S., Zhu, Y., & Li, M. (2020) · IEEE Access · doi:10.1109/access.2020.2968491 · Cited by 17
“VOLUME 8, 2020 18861 [28] A. Saifullah, Y. Xu, C. Lu, and Y. Chen, ‘‘Priority assignment for real-time flows in WirelessHART networks,’’ in Proc.”
BackgroundInfluentialPu, C., Ding, X., Wang, P., Xie, S., & Chen, J. (2022) · Sensors · doi:10.3390/s22207762 · Cited by 21
“, Modbus, Foundation Fieldbus, and Powerlink) via gateways [3].”
Fusco, F., Castrillo, V. U., Giannetta, H., Albano, M., & Cavallini, E. (2024) · Aerospace · doi:10.3390/aerospace11020132 · Cited by 16
Wang, Z., Yong, T., Song, X., & Sun, D. (2023) · IEEE Sensors Journal · doi:10.1109/jsen.2023.3330998 · Cited by 15
“For instance, industrial process control needs a millisecond-level synchronization [23], while distributed real-time control systems require a microsecond-level synchronization [5].”
BackgroundWireless control: Retrospective and open vistas
Pezzutto, M., Dey, S., Garone, E., Gatsis, K., Johansson, K. H., & Schenato, L. (2024) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2024.100972 · Cited by 16
Enabling Energy Efficient HVAC Operation Through IWSNs
Schlichter, J., Vogt, M., Agrawal, N., Wolf, L. C., & Herrmann, C. A. (2021) · IEEE Transactions on Green Communications and Networking · doi:10.1109/tgcn.2021.3105370 · Cited by 14
Wireless Sensor Networks in Industry 4.0: WirelessHART and ISA100.11a
Adriano, J. D., do Rosario, E. C., & Rodrigues, J. J. P. C. (2018) · IEEE International Conference on Industry Applications · doi:10.1109/induscon.2018.8627177 · Cited by 14
“An extensive discussion of similarities and differences is made in [17], [18] and [24].”
BackgroundAlmuntasheri, S. A., & Alenazi, M. J. F. (2022) · Applied Sciences · doi:10.3390/app121910073 · Cited by 19
“Their capacity to address different challenges in the production line, such as integration, flexibility, and scalability, which help to reduce optimizing costs, makes them essential in the intelligent industry [9].”
BackgroundSensor data transmission from a physical twin to a digital twin
Ala-Laurinaho, R. (2019) · Aaltodoc (Aalto University) · Cited by 29
Zheng, M., Zhao, Y., Shi, H., & Liang, W. G. (2023) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2023.3259945 · Cited by 14
“Representative process automation applications include chemical manufacturing, oil and gas, glass and mineral [4].”
BackgroundStatistical Learning-Based Adaptive Network Access for the Industrial Internet of Things
Raza, M. A., Abolhasan, M., Lipman, J., Shariati, N., Ni, W., & Jamalipour, A. (2023) · IEEE Internet of Things Journal · doi:10.1109/jiot.2023.3245585 · Cited by 13
“Latency requirements for different industrial process automation applications, including safety, control, and monitoring, are described in [4].”
BackgroundChannel assignment in TSCH-based wireless sensor networks using fuzzy logic
Queiroz, D. V., Gomes, R. D., da Fonseca, I. E., de Alencar, M. S., & Benavente-Peces, C. (2021) · Journal of Ambient Intelligence and Humanized Computing · doi:10.1007/s12652-020-02741-1 · Cited by 13
Proactive fault-tolerant wireless mesh networks for mission-critical control systems
Park, P., Shokri‐Ghadikolaei, H., & Fischione, C. (2021) · Journal of Network and Computer Applications · doi:10.1016/j.jnca.2021.103082 · Cited by 13
Yasari, A. K. I., Latiff, L. A., Dziyauddin, R. A., Lilo, M. A., Aljeroudi, Y., & Atee, H. A. (2017) · Computers & Electrical Engineering · doi:10.1016/j.compeleceng.2017.02.024 · Cited by 12
Toward Refined Nash Equilibria for the SET K-COVER Problem via a Memorial Mixed-Response Algorithm
Sun, C., Wang, X., Qiu, H., Sun, W., & Zhou, Q. (2021) · IEEE Transactions on Systems Man and Cybernetics Systems · doi:10.1109/tsmc.2021.3049580 · Cited by 12
“W ITH the vision to organize a collection of small, cheap, and fault prone sensors into a cooperative network [1]–[3], the wireless sensor network (WSN) has been attracting tremendous research interests and found wide applications in real-world scenarios, such as military surveillance,”
BackgroundA mobility-compliant publish–subscribe system for an information-centric Internet of Things
Gündoğan, C., Kietzmann, P., Schmidt, T. C., & Wählisch, M. (2021) · Computer Networks · doi:10.1016/j.comnet.2021.108656 · Cited by 14
“Despite of a maturing IETF protocol suite, dozens of incompatible industry solutions are rolled out to meet device and network constraints, as well as application specific needs [1,2].”
BackgroundA Potential Game Approach for Decentralized Resource Coordination in Coexisting IWNs
Zhang, J., Liang, W. G., Yang, B., Shi, H., Wang, K., & Wang, Q. (2022) · IEEE Transactions on Cognitive Communications and Networking · doi:10.1109/tccn.2022.3152507 · Cited by 12
Self-citationde Jesus, T. C., Portugal, P., Costa, D. G., & Vasques, F. (2020) · Sensors · doi:10.3390/s20226542 · Cited by 12
“Over this MA are deployed 11 visual sensor nodes and one gateway node, according to the industrial wireless network presented in Reference [9], implementing a network topology according to the WirelessHART standard (one of the most adopted wireless communication protocol in industrial applications [30]).”
MethodPrioritized Clock Synchronization for Event Critical Applications in Wireless IoT Networks
Bhandari, S., & Wang, X. (2019) · IEEE Sensors Journal · doi:10.1109/jsen.2019.2912938 · Cited by 11
“As presented in ISA 100, the data traffics in the automation and control applications are classified into safety, control, and monitoring based on the reliability and latency requirements [5].”
BackgroundMSE Minimized Scheduling for Multiple-Source Remote Estimation with AoI Constraints in IWSN
Chen, K., Ding, L., Yang, F., & Qian, L. (2020) · International Conference on Wireless Communications and Signal Processing (WCSP) · doi:10.1109/wcsp49889.2020.9299851 · Cited by 11
A Systematic Review on Various Attack Detection Methods for Wireless Sensor Networks
Nithya, K. J., & Shyamala, K. (2021) · Advances in intelligent systems and computing · doi:10.1007/978-981-16-3071-2_17 · Cited by 11
Security and Fault Detection in In-node components of IIoT Constrained Devices
Raposo, D., Rodrigues, A., Sinche, S., Silva, J. S., & Boavida, F. (2019) · Conference on Local Computer Networks · doi:10.1109/lcn44214.2019.8990697 · Cited by 11
“4 [3] based standards like ZigBee, WirelessHART, ISA100.”
Mixed Traffic Scheduling With Latency and Jitter Analysis in URLLC Industrial Automation
Liu, Z., Li, K., Wang, Y., & Zhu, P. (2025) · IEEE Internet of Things Journal · doi:10.1109/jiot.2025.3566083 · Cited by 10
“Current research primarily focuses on high-capacity networks, such as wireless local area network (WLAN) family [15], low-power networks represented by Bluetooth and ZigBee [16], [17], and wireless sensor networks [18], [19].”
Jabbar, A., Abbasi, Q. H., Imran, M. A., & Rehman, M. U. (2022) · International Workshop on Antenna Technology · doi:10.1109/iwat54881.2022.9810999 · Cited by 10
“Many sub-6 GHz wireless standards exist in industry [3], [4].”
BackgroundIEEE 802.15.4 Technologies for Smart Grids
Kabalcı, Y. (2018) · Engergy systems in electrical engineering · doi:10.1007/978-981-13-1768-2_15 · Cited by 10
Multi-Gigabit Millimeter-Wave Industrial Communication: A Solution for Industry 4.0 and Beyond
Jabbar, A., Jamshed, M. A., Shawky, M. A., Abbasi, Q. H., Imran, M. A., & Rehman, M. U. (2022) · Globecom · doi:10.1109/globecom48099.2022.10001125 · Cited by 12
Hassan, S. M., Ibrahim, R., Saad, N. B., Asirvadam, V. S., & Bingi, K. (2017) · IEEE Access · doi:10.1109/access.2017.2772925 · Cited by 10
“11Wireless [12].”
Implementing MRCRLB technique on modulation schemes in wireless rechargeable sensor networks
Angurala, M., Bala, M., & Bamber, S. S. (2021) · Egyptian Informatics Journal · doi:10.1016/j.eij.2021.03.002 · Cited by 10
Hybrid Software Deployment Strategy for Complex Industrial Systems
Rajkovic, P. J., Aleksić, D., Dordevic, A., & Jankovic, D. S. (2022) · Electronics · doi:10.3390/electronics11142186 · Cited by 12
Scalable IoT Sensing Systems With Dynamic Sinks
Tanyingyong, V., Olsson, R., Hidell, M., & Sjödin, P. (2021) · IEEE Internet of Things Journal · doi:10.1109/jiot.2021.3094275 · Cited by 10
Collaborative Coexistence Management Scheme for Industrial Wireless Sensor Networks
Hong, S. H., Sun, J., Yu, M., Zhang, X., & Xu, A. (2018) · IEEE Access · doi:10.1109/access.2018.2886365 · Cited by 9
“Therefore, these tradeoffs need to be carefully considered when determining the length of the superframe [21].”
BackgroundResearch toward IoT and Robotics in Intelligent Manufacturing: A Survey
Liu, X. J. (2019) · International Journal of Materials Mechanics and Manufacturing · doi:10.18178/ijmmm.2019.7.3.445 · Cited by 9
Electromagnetic compatibility issues in hybrid wired and wireless industrial networks
Gaj, P., & Maćkowski, M. (2020) · PLoS ONE · doi:10.1371/journal.pone.0232405 · Cited by 9
Hassan, S. M., Ibrahim, R., Saad, N. B., Asirvadam, V. S., & Bingi, K. (2019) · Journal of Intelligent & Fuzzy Systems · doi:10.3233/jifs-171288 · Cited by 8
Load balancing routing algorithm of industrial wireless network for digital twin
Xiao, L., Li, S., Wen, Q., Liang, X., Li, Y., Wang, W., & Fu, Y. (2025) · Computer Networks · doi:10.1016/j.comnet.2025.111059 · Cited by 8
Internet of things for smart grid applications
Kabalcı, E., & Kabalcı, Y. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-819710-3.00007-7 · Cited by 9
The Key Technology of Wireless Sensor Network and Its Application in the Internet of Things
Zhang, Y., & Cai, W. (2022) · Journal of Sensors · doi:10.1155/2022/1817781 · Cited by 8
“Wang and Jiang presented a detailed comparison of the design and protocol architecture [3, 4].”
BackgroundAoI-Bounded Scheduling for Industrial Wireless Sensor Networks
Pu, C., Yang, H., Wang, P., & Dong, C. (2023) · Electronics · doi:10.3390/electronics12061499 · Cited by 7
Towards wireless communication in control systems of the civil nuclear energy sector
Pulgarín, E. J. L., Herrmann, G., Hollinshead, C., May, J. H. R., Gebremicael, K. N., & Daw, D. (2024) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2024.100936 · Cited by 7
Distributed Communication Protocol in Wireless Sensor Network Based on Internet of Things Technology
Fang, T., & Yang, Y. (2022) · Wireless Personal Communications · doi:10.1007/s11277-021-09203-7 · Cited by 7
“1 3 integrate the connection between people and things to achieve intelligent management [1].”
BackgroundExpendable and Distributed Measurement Scheme for Acquisition of Naturally Sparse Events
Vivekanand, V., & Mishra, D. (2022) · Wireless Personal Communications · doi:10.1007/s11277-022-10151-z · Cited by 7
When Industrial Radio Security Meets AI: Opportunities and Challenges
Li, W., Chen, G., Zhang, X., Wang, N., Lv, S., & Huang, J. (2024) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2024.3413320 · Cited by 6
“Compared with traditional radio attacks, radio attacks against industrial wireless network have significant characteristics due to the uniqueness of industrial wireless networks [9], [11], [27].”
BackgroundDevelopment of WirelessHART adapter with industrial transmitter for process monitoring
Supramaniam, T., Ibrahim, R., Hassan, S. M., & Bingi, K. (2017) · IEEE International Conference on Signal and Image Processing Applications (ICSIPA) · doi:10.1109/icsipa.2017.8120624 · Cited by 6
“The improvement of Wireless Sensor Network (WSN) in variety of applications, for example, health monitoring of instrument, personal health monitoring, smart grid, agriculture, habitat monitoring, and modern automation have been expanding as multinational organizations are requesting for development of process effectiv…”
BackgroundA Network Scheduling Method for Convergence of Industrial Wireless Network and TSN
Wei, M., & Yang, S. (2023) · International Conference on Ubiquitous Information Management and Communication (IMCOM) · doi:10.1109/imcom56909.2023.10035542 · Cited by 6
“Priority of Data Flows in WIA-PA and TSN PPPPWWWW PPPPTTTTWW PPPPWWWW PPPPTTTTWW PPPPWWWW PPPPTTTTWW PPPPWWWW PPPPTTTTWW [0, 1] 0 7 0 7 0 7 0 7 [2, 3] 0 6 0 6 0 6 0 6 [4, 5] 1 5 1 5 1 5 1 5 [6, 7] 1 4 1 4 1 4 1 4 [8, 9] 2 3 2 3 2 3 2 3 [10, 11] 2 2 2 2 2 2 2 2 [12, 13] 3 1 3 1 3 1 3 1 [14, 15] 3 0 3 0 3 0 3 0”
Background
Metadata
- Authors
- Wang, Q., & Jiang, J.
- Affiliations
- Western University (CA)
- ORCID
- Venue
- IEEE Communications Surveys & Tutorials
- Published
- 2016
- Volume
- 18
- Issue
- 3
- Pages
- 2197-2219
- ISSN
- 1553-877X (ISSN-L)
- 2373-745X
- OpenAlex
- W2328689326
- Cited by
- 182
- References
- 138
- Citations by year
- 2026: 2 · 2025: 8 · 2024: 17 · 2023: 17 · 2022: 21 · 2021: 23 · 2020: 25 · 2019: 26 · 2018: 27 · 2017: 15 · 2016: 1
- FWCI
- 19.35
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Communications Surveys & Tutorials (publishedVersion)
- Funders
- Natural Sciences and Engineering Research Council of Canada
- UNENE
- ISTP Canada
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Wireless Sensor Networks and IoT
- Physical Sciences › Computer Science › Computer Networks and Communications › Energy Efficient Wireless Sensor Networks
- Physical Sciences › Engineering › Control and Systems Engineering › Industrial Automation and Control Systems
- Keywords
- industrial wireless sensor networks, ZigBee, WirelessHART, ISA100.11a, WIA-PA, protocol architecture, protocol layers, industrial communication, standard comparison
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.