Comparative Examination on Architecture and Protocol of Industrial Wireless Sensor Network Standards
The DOI matches its Crossref record; 133 of the 138 references it cites were found in a registry or an index.
Abstract
This paper discusses key aspects of the four most popular industrial wireless sensor network standards: ZigBee, WirelessHART, ISA100.11a, and WIA-PA. The detailed design and protocol architectures are comparatively examined. The uniqueness of each standard is highlighted and justifications for their design are provided. Similarities and differences among these standards at each protocol layer are compared. With consideration of the scopes and the limitations of these standards, the suitability of these standards to meet the industrial requirements has also been examined.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The IEEE working group (WG) [36,37,38,60,61] are actively working on improvements and standardization of communication technologies supporting IIoT use cases.”
From Industrial IoT, Cyber Threats, and Standards Landscape: Evaluation and Roadmap (2021) · cites this paper as [37]
In the citing paper
“This can be accomplished by implementing industrial blockchain technology to meet the required levels of security, openness, and decentralization [37].”
From Industrial IoT, Cyber Threats, and Standards Landscape: Evaluation and Roadmap (2021) · cites this paper as [37]
Citations
Cites
Ad hoc On-Demand Distance Vector (AODV) Routing
Perkins, C., Belding-Royer, E., & Das, S. (2003) · doi:10.17487/rfc3561 · Cited by 10,686 · cited 1×
“a) ZigBee: The ZigBee standard provides two different routing schemes: tree routing [80], [81] and ad hoc on-demand distance vector (AODV) routing [82], [83].”
BackgroundWireless sensor network survey
Yick, J., Mukherjee, B., & Ghosal, D. (2008) · Computer Networks · doi:10.1016/j.comnet.2008.04.002 · Cited by 6,255
Wireless sensor networks for habitat monitoring
Mainwaring, A., Culler, D., Polastre, J., Szewczyk, R., & Anderson, J. (2002) · Proceedings of the 1st ACM international workshop on Wireless sensor networks and applications · doi:10.1145/570738.570751 · Cited by 4,166 · cited 1×
“During the past decade, WSNs had found their way into a wide variety of applications [3], such as health monitoring of civil infrastructures [4], personal health monitoring [5], smart grid [6], agriculture [7], habitat monitoring [8], and industrial automation [9].”
BackgroundWireless mesh networks: a survey
Akyildiz, I. F., Wang, X., & Wang, W. (2005) · Computer Networks · doi:10.1016/j.comnet.2004.12.001 · Cited by 4,007 · cited 1×
“Meanwhile, the mesh topology is associated with some intelligence (such as self-forming, self-healing, and self-organization) [97], in order to provide more benefits, such as flexible network architecture, easy deployment and configuration, fault tolerance, and”
BackgroundSensor networks: Evolution, opportunities, and challenges
Chong, C.-Y., & Kumar, S. P. (2003) · Proceedings of the IEEE · doi:10.1109/jproc.2003.814918 · Cited by 3,079 · cited 1×
“The design of a WSN depends significantly on the requirements of particular applications [2], since different applications may have different requirements and objectives.”
BackgroundIndustrial Wireless Sensor Networks: Challenges, Design Principles, and Technical Approaches
Gungor, V. C., & Hancke, G. P. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2015754 · Cited by 1,669 · cited 2×
“Unlike office networks, an industrial environment is prone to unpredictable variations in temperature, pressure, humidity, vibrations, and the presence of heavy metal objects [9].”
BackgroundPerformance comparison of two on-demand routing protocols for ad hoc networks
Perkins, C. E., Royer, E. M., Das, S. R., & Marina, M. K. (2001) · IEEE Personal Communications · doi:10.1109/98.904895 · Cited by 1,491
Opportunities and Challenges of Wireless Sensor Networks in Smart Grid
Gungor, V. C., Lu, B., & Hancke, G. P. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2039455 · Cited by 1,368 · cited 1×
“During the past decade, WSNs had found their way into a wide variety of applications [3], such as health monitoring of civil infrastructures [4], personal health monitoring [5], smart grid [6], agriculture [7], habitat monitoring [8], and industrial automation [9].”
BackgroundWireless sensor networks for personal health monitoring: Issues and an implementation
Milenković, A., Otto, C., & Jovanov, E. (2006) · Computer Communications · doi:10.1016/j.comcom.2006.02.011 · Cited by 1,023 · cited 1×
“During the past decade, WSNs had found their way into a wide variety of applications [3], such as health monitoring of civil infrastructures [4], personal health monitoring [5], smart grid [6], agriculture [7], habitat monitoring [8], and industrial automation [9].”
BackgroundTime synchronization in sensor networks: a survey
Sivrikaya, F., & Yener, B. (2004) · IEEE Network · doi:10.1109/mnet.2004.1316761 · Cited by 851 · cited 1×
“tion in a sensor network aims at providing a common time scale for local clocks within the nodes in the network [99].”
BackgroundRuiz-Garcia, L., Lunadei, L., Barreiro, P., & Robla, I. (2009) · Sensors · doi:10.3390/s90604728 · Cited by 744 · cited 1×
“During the past decade, WSNs had found their way into a wide variety of applications [3], such as health monitoring of civil infrastructures [4], personal health monitoring [5], smart grid [6], agriculture [7], habitat monitoring [8], and industrial automation [9].”
BackgroundCost Analysis of Inadequate Interoperability in the U.S. Capital Facilities Industry
Gallaher, M. P., O'Connor, A. C., Dettbarn, Jr., & Gilday, L. T. (2004) · doi:10.6028/nist.gcr.04-867 · Cited by 663
Wireless Technology in Industrial Networks
Willig, A., Matheus, K., & Wolisz, A. (2005) · Proceedings of the IEEE · doi:10.1109/jproc.2005.849717 · Cited by 661 · cited 1×
“4 standard, which is a widely used standard for short-range connectivity characterized by low-power consumption and low cost [60].”
BackgroundRecent and Emerging Topics in Wireless Industrial Communications: A Selection
Willig, A. (2008) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2008.923194 · Cited by 656 · cited 2×
“Z-AODV is more energy-efficient since it can avoid a priori setup and maintenance of a routing table and instead finds routes and creates routing tables on demand [86].”
BackgroundWirelessHART: Applying Wireless Technology in Real-Time Industrial Process Control
Song, J., Han, S., Mok, A., Chen, D., Lucas, M., Nixon, M., & Pratt, W. (2008) · 2008 IEEE Real-Time and Embedded Technology and Applications Symposium · doi:10.1109/rtas.2008.15 · Cited by 615 · cited 1×
“is a collection of paths that connect network nodes [88].”
BackgroundIntroduction to Industrial Control Networks
Galloway, B., & Hancke, G. P. (2013) · IEEE Communications Surveys & Tutorials · doi:10.1109/surv.2012.071812.00124 · Cited by 548 · cited 1×
“make installation easier, increase the flexibility and freedom in plants [11], reduce expenditure for the infrastructure [12].”
BackgroundZigBee Wireless Networks and Transceivers
Farahani, S. (2008) · Cited by 448
Mulligan, G. (2007) · Proceedings of the 4th workshop on Embedded networked sensors · doi:10.1145/1278972.1278992 · Cited by 436 · cited 2×
“IPv6, such as the increased IP address (128 bit) and the 1280 Bytes maximum transmission unit (MTU) [63].”
BackgroundInfluentialHealth Monitoring of Civil Infrastructures Using Wireless Sensor Networks
Kim, S., Pakzad, S., Culler, D., Demmel, J., Fenves, G., Glaser, S., & Turon, M. (2007) · 2007 6th International Symposium on Information Processing in Sensor Networks · doi:10.1109/ipsn.2007.4379685 · Cited by 372 · cited 1×
“During the past decade, WSNs had found their way into a wide variety of applications [3], such as health monitoring of civil infrastructures [4], personal health monitoring [5], smart grid [6], agriculture [7], habitat monitoring [8], and industrial automation [9].”
BackgroundKumar S., A. A., Ovsthus, K., & Kristensen., L. M. (2014) · IEEE Communications Surveys & Tutorials · doi:10.1109/surv.2014.012114.00058 · Cited by 371 · cited 1×
“Requirements, protocols and challenges of the IWSNs are summarized in 2014 in paper [27].”
BackgroundWirelessHART Versus ISA100.11a: The Format War Hits the Factory Floor
Petersen, S., & Carlsen, S. (2011) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2011.943023 · Cited by 333 · cited 3×
“Messages encrypted with the public key can be decrypted only with the private key [26].”
BackgroundInfluentialChen, J., Cao, X., Cheng, P., Xiao, Y., & Sun, Y. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2043038 · Cited by 295
Survey on the Characterization and Classification of Wireless Sensor Network Applications
Borges, L. M., Velez, F. J., & Lebres, A. S. (2014) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2014.2320073 · Cited by 274
ZigBee and Bluetooth: strengths and weaknesses for industrial applications
Baker, N. (2005) · Computing and Control Engineering · doi:10.1049/cce:20050204 · Cited by 267 · cited 1×
“1 for the process automation applications [51], due to its economical battery usage, greater communication range, flexibility in a number of nodes, and reliability of the mesh networking architecture.”
Background6TiSCH: deterministic IP-enabled industrial internet (of things)
Dujovne, D., Watteyne, T., Vilajosana, X., & Thubert, P. (2014) · IEEE Communications Magazine · doi:10.1109/mcom.2014.6979984 · Cited by 267 · cited 1×
“power wireless industrial monitoring applications [117].”
Novel Industrial Wireless Sensor Networks for Machine Condition Monitoring and Fault Diagnosis
Hou, L., & Bergmann, N. W. (2012) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2012.2200817 · Cited by 249 · cited 1×
“processes [13]–[17].”
A Survey of MAC Protocols for Mission-Critical Applications in Wireless Sensor Networks
Suriyachai, P., Roedig, U., & Scott, A. (2012) · IEEE Communications Surveys & Tutorials · doi:10.1109/surv.2011.020211.00036 · Cited by 243 · cited 1×
“For example, a wireless network in an industrial environment generally requires the ability to support time critical [44] and deterministic communications.”
BackgroundZigBee Wireless Networks and Transceivers
(2008) · Elsevier eBooks · doi:10.1016/b978-0-7506-8393-7.x0001-5 · Cited by 215 · cited 1×
“1) Beaconing: The beacon is a message with specific format that is used to synchronize the network devices, identify the network, and describe the structure of the superframe [71].”
BackgroundOnline and Remote Motor Energy Monitoring and Fault Diagnostics Using Wireless Sensor Networks
Lu, B., & Gungor, V. C. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2028349 · Cited by 201
Emerging standards for wireless mesh technology
Lee, M. J., Zheng, J., Ko, Y.-B., & Shrestha, D. M. (2006) · IEEE Wireless Communications · doi:10.1109/mwc.2006.1632481 · Cited by 192 · cited 1×
“overhead [87].”
Context-Adaptive Multimodal Wireless Sensor Network for Energy-Efficient Gas Monitoring
Jelicic, V., Magno, M., Brunelli, D., Paci, G., & Benini, L. (2013) · IEEE Sensors Journal · doi:10.1109/jsen.2012.2215733 · Cited by 191
Packet Error Rate Analysis of ZigBee Under WLAN and Bluetooth Interferences
Shin, S., Park, H., Choi, S., & Kwon, W. (2007) · IEEE Transactions on Wireless Communications · doi:10.1109/twc.2007.06112 · Cited by 181
A comparison of WirelessHART and ZigBee for industrial applications
Lennvall, T., Svensson, S., & Hekland, F. (2008) · 2008 IEEE International Workshop on Factory Communication Systems · doi:10.1109/wfcs.2008.4638746 · Cited by 176 · cited 1×
“However, one of the biggest concerns in ZigBee based networks in a star topology is the lack of robustness to meet requirements in industrial applications due to the lack of path diversity [96].”
BackgroundRequirements and current solutions of wireless communication in industrial automation
Frotzscher, A., Wetzker, U., Bauer, M., Rentschler, M., Beyer, M., Elspass, S., & Klessig, H. (2014) · 2014 IEEE International Conference on Communications Workshops (ICC) · doi:10.1109/iccw.2014.6881174 · Cited by 175 · cited 1×
“4 ms by combining TDMA and frequency hopping [36].”
MethodBluetooth and WLAN coexistence: challenges and solutions
Golmie, N., Chevrollier, N., & Rebala, O. (2003) · IEEE Wireless Communications · doi:10.1109/mwc.2003.1265849 · Cited by 174 · cited 1×
“Frequency hopping has been proven to minimize interference and enhance security on congested radio bands for both Bluetooth and military backpack radios [75],”
BackgroundMonitoring in Industrial Systems Using Wireless Sensor Network With Dynamic Power Management
Salvadori, F., de Campos, M., Sausen, P. S., de Camargo, R. F., Gehrke, C., Rech, C., Spohn, M. A., & Oliveira, A. C. (2009) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2009.2016882 · Cited by 167 · cited 1×
“processes [13]–[17].”
Wireless Sensor Networks for Industrial Process Monitoring and Control: A Survey
Zhao, G. (2011) · Network Protocols and Algorithms · doi:10.5296/npa.v3i1.580 · Cited by 162 · cited 3×
“Security is a legitimate concern for wireless sensor network in process industry [10].”
BackgroundInfluentialShen, W., Zhang, T., Barać, F., & Gidlund, M. (2013) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2013.2280081 · Cited by 158
An Experimental Study of Hierarchical Intrusion Detection for Wireless Industrial Sensor Networks
Shin, S., Kwon, T., Jo, G.-Y., Park, Y., & Rhy, H. (2010) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2010.2051556 · Cited by 156 · cited 1×
“machinery [45].”
Challenging the interoperability between computers in industry with MDA and SOA
Jardim‐Gonçalves, R., Grilo, A., & Steiger-Garcao, A. (2006) · Computers in Industry · doi:10.1016/j.compind.2006.04.013 · Cited by 151 · cited 1×
“Interoperability [68], [69] of a standard, which refers”
BackgroundWirelessHART™: Real-Time Mesh Network for Industrial Automation
Chen, D., Nixon, M. S., & Mok, A. K. (2010) · Springer eBooks · doi:10.1007/978-1-4419-6047-4 · Cited by 149
Shortcut Tree Routing in ZigBee Networks
Kim, T., Kim, D., Park, N., Yoo, S.-E., & López, T. S. (2007) · International Symposium on Wireless Pervasive Computing · doi:10.1109/iswpc.2007.342571 · Cited by 142 · cited 1×
“The principle of tree routing is that the correct branch can be inferred from the destination address by using the “Cskip” addressing algorithm [84], [85].”
MethodA Security Analysis for Wireless Sensor Mesh Networks in Highly Critical Systems
Alcaraz, C., & Lopez, J. (2010) · IEEE Transactions on Systems, Man, and Cybernetics, Part C (Applications and Reviews) · doi:10.1109/tsmcc.2010.2045373 · Cited by 132 · cited 1×
“In paper [24], published in 2010, ZigBee, WirelessHART, and ISA100.”
BackgroundInstrumentation Reference Book
Boyes, W. (2010) · Elsevier eBooks · doi:10.1016/c2009-0-25186-5 · Cited by 130
Modular Wireless Real-Time Sensor/Actuator Network for Factory Automation Applications
Korber, H.-J., Wattar, H., & Scholl, G. U. (2007) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2007.898451 · Cited by 124 · cited 1×
“1 (Bluetooth) have a sufficiently high data rate, but they do not support large number of network nodes, especially with very low power consumption [50].”
BackgroundWirelessHART™: Real-Time Mesh Network for Industrial Automation
Chen, D., Nixon, M. S., & Mok, A. K. (2010) · Cited by 119
IPv6 in Low-Power Wireless Networks
Hui, J. W., & Culler, D. (2010) · Proceedings of the IEEE · doi:10.1109/jproc.2010.2065791 · Cited by 115 · cited 1×
“11a are compatible with 6LoWPAN [62], which defines the frame for-”
MethodScheible, G., Dzung, D., Endresen, J., & Frey, J.-E. (2007) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2007.901481 · Cited by 115 · cited 1×
“As shown in Table II, the wireless interface for sensors and actuators (WISA) system [32], [33], which is developed by ABB, provides both wireless communication and wireless power supply to address the stringent real-time requirements of factory automation.”
BackgroundHybrid wired/wireless networks for real-time communications
Cena, G., Valenzano, A., & Vitturi, S. (2008) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2008.917155 · Cited by 111 · cited 1×
“access point for the wireless networks [98].”
Evaluation of Response Times in Industrial WLANs
Cena, G., Bertolotti, I. C., Valenzano, A., & Zunino, C. (2007) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2007.903219 · Cited by 102 · cited 1×
“and highlighting the robustness, reusability, and ease of maintenance of industrial automation systems [67].”
BackgroundWireless Industrial Monitoring and Control Networks: The Journey So Far and the Road Ahead
Zand, P., Chatterjea, S., Das, K., & Havinga, P. (2012) · Journal of Sensor and Actuator Networks · doi:10.3390/jsan1020123 · Cited by 97 · cited 1×
“Since nodes of a ZigBee network usually spend a large proportion of the time in a low-power sleep state, ZigBee is mainly suitable to be deployed in class 4–5 applications, where low-power consumption is given priority over providing a bounded response time delay [31].”
BackgroundSurvey and experiments of WIA‐PA specification of industrial wireless network
Liang, W. G., Zhang, X., Xiao, Y., Wang, F., Zeng, P., & Yu, H. (2010) · Wireless Communications and Mobile Computing · doi:10.1002/wcm.976 · Cited by 97 · cited 1×
“paper [25], published in 2010, briefly introduced the differences of technical features among WIA-PA, ISA100.”
BackgroundThe Orphan Problem in ZigBee Wireless Networks
Pan, M., Tsai, C.-H., & Tseng, Y. (2009) · IEEE Transactions on Mobile Computing · doi:10.1109/tmc.2009.60 · Cited by 93 · cited 1×
“a) ZigBee: The ZigBee standard provides two different routing schemes: tree routing [80], [81] and ad hoc on-demand distance vector (AODV) routing [82], [83].”
BackgroundYang, D., Xu, Y., Wang, H., Zheng, T., Zhang, H., Zhang, H., & Gidlund, M. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2402642 · Cited by 89
Industrial Wireless Sensor Networks: Applications, Protocols, and Standards
Erdelj, M., Mitton, N., & Natalizio, E. (2013) · CRC Press eBooks · doi:10.1201/b14072 · Cited by 89 · cited 2×
“download security keys, set network id, as well as for configuration of field wireless devices [104].”
BackgroundMethodIntegration of a Wireless I/O Interface for PROFIBUS and PROFINET for Factory Automation
Kjellsson, J., Vallestad, A. E., Steigmann, R., & Dzung, D. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2017098 · Cited by 88 · cited 1×
“As shown in Table II, the wireless interface for sensors and actuators (WISA) system [32], [33], which is developed by ABB, provides both wireless communication and wireless power supply to address the stringent real-time requirements of factory automation.”
BackgroundExperimental Characterization of Wireless Sensor Networks for Industrial Applications
Bertocco, M., Gamba, G., Sona, A., & Vitturi, S. (2008) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2008.925344 · Cited by 86 · cited 1×
“Some experiments [52]–[54] have been conducted to evaluate the performance of the PHY layer of IEEE 802.”
MethodPerformance evaluation of WirelessHART for factory automation
Petersen, S., & Carlsen, S. (2009) · IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) · doi:10.1109/etfa.2009.5346996 · Cited by 78
A Comprehensive Performance Study of OPNET Modeler for ZigBee Wireless Sensor Networks
Hammoodi, I. S., Stewart, B. G., Kocian, A., & McMeekin, S. G. (2009) · International Conference on Next Generation Mobile Applications, Services and Technologies (NGMAST) · doi:10.1109/ngmast.2009.12 · Cited by 78
Routing and Scheduling Algorithms for WirelessHARTNetworks: A Survey
Nobre, M., da Silva, I. M. D., & Guedes, L. A. (2015) · Sensors · doi:10.3390/s150509703 · Cited by 76 · cited 1×
“A literature review of these scheduling techniques can be found in [91].”
BackgroundQuick convergecast in ZigBee beacon-enabled tree-based wireless sensor networks
Pan, M., & Tseng, Y. (2007) · Computer Communications · doi:10.1016/j.comcom.2007.12.015 · Cited by 71
Timing and Power Issues in Wireless Sensor Networks — An Industrial Test Case
Aakvaag, N., Mathiesen, M., & Thonet, G. (2005) · International Conference on Parallel Processing Workshops (ICPPW) · doi:10.1109/icppw.2005.85 · Cited by 62 · cited 1×
“and reliability properties [55] for industrial applications, the three standards (WirelessHART, ISA100.”
Background6TiSCH Wireless Industrial Networks: Determinism Meets IPv6
Palattella, M. R., Thubert, P., Vilajosana, X., Watteyne, T., Wang, Q., & Engel, T. (2014) · Smart sensors, measurement and instrumentation · doi:10.1007/978-3-319-04223-7_5 · Cited by 61 · cited 1×
“dardizing mechanisms supporting different resource scheduling approaches [118], including centralized, distributed, and hybrid.”
BackgroundSelf-citationIETF 6TSCH: Combining IPv6 Connectivity with Industrial Performance
Thubert, P., Watteyne, T., Palattella, M. R., Vilajosana, X., & Wang, Q. (2013) · International Conference on Innovative Mobile and Internet Services in Ubiquitous Computing (IMIS) · doi:10.1109/imis.2013.96 · Cited by 59 · cited 1×
“11a [57], while key technology of the DSME is also adopted by WIA-PA in advance.”
MethodSelf-citationIEEE 802.15.4 Low-Rate Wireless Personal Area Networks: Enabling Wireless Sensor Networks
Gutierrez, J. A., Callaway, E. H., & Barrett, R. L. (2003) · Cited by 55
Implementation of WirelessHART in the NS-2 Simulator and Validation of Its Correctness
Zand, P., Mathews, E., Havinga, P., Stojanovski, S., Sisinni, E., & Ferrari, P. (2014) · Sensors · doi:10.3390/s140508633 · Cited by 48 · cited 2×
“The objective of WirelessHART is to support industrial applications ranging from class 2 to 5 [46].”
BackgroundMobility Aware Framework for Timeslotted Channel Hopping IEEE 802.15.4e Sensor Networks
Al-Nidawi, Y. M., & Kemp, A. H. (2015) · IEEE Sensors Journal · doi:10.1109/jsen.2015.2472276 · Cited by 48 · cited 1×
“4e [56], as shown in Table V: timeslotted chan-”
BackgroundPerformance Analysis of ISA100.11a Under Interference From an IEEE 802.11b Wireless Network
Rezha, F. P., & Shin, S. Y. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2014.2307016 · Cited by 43
Optimal Sleep/Wake Scheduling for Time-Synchronized Sensor Networks With QoS Guarantees
Wu, Y., Fahmy, S., & Shroff, N. B. (2009) · IEEE/ACM Transactions on Networking · doi:10.1109/tnet.2008.2010450 · Cited by 42 · cited 1×
“and the receiver so that they can wake up at the same time to communicate [100].”
BackgroundIndustrial Wireless Technology for the 21st Century
none (2002) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/1218799 · Cited by 42
Performance evaluation of IEEE 802.15.4e DSME MAC protocol for wireless sensor networks
Jeong, W.-C., & Lee, J. (2012) · doi:10.1109/etsiot.2012.6311258 · Cited by 40 · cited 1×
“domain is of most importance to avoid unwanted interfering signals from neighboring devices [105].”
BackgroundA Graph Route-Based Superframe Scheduling Scheme in WirelessHART Mesh Networks for High Robustness
Dang, K., Shen, J., Dong, L.-D., & Xia, Y. (2012) · Wireless Personal Communications · doi:10.1007/s11277-012-0946-2 · Cited by 39 · cited 1×
“Some algorithms or details in implementation of the resource allocation have been covered for WirelessHART [106], [107], ISA100.”
MethodNetworked Embedded Systems: An Overview
Zurawski, R. (2009) · Industrial information technology series · doi:10.1201/9781439807620.ch1 · Cited by 38
Performance Analysis of the Industrial Wireless Networks Standard: WIA-PA
Zheng, M., Liang, W. G., Yu, H., & Xiao, Y. (2015) · Mobile Networks and Applications · doi:10.1007/s11036-015-0647-7 · Cited by 38 · cited 1×
“11a [136]–[140], WIA-PA [141], [142].”
Wagner, R., & Barton, R. J. (2012) · IEEE Aerospace Conference (AERO) · doi:10.1109/aero.2012.6187218 · Cited by 37 · cited 1×
“As of this writing, little attempt has been made to compare the performance of these standards in an uniform industrial environment except the following: paper [153] compared”
BackgroundEvaluation of ZigBee Wireless Sensor Networks Under High Power Disturbances
Sallabi, F., Gaouda, A. M., El‐Hag, A., & Salama, M. M. A. (2014) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2013.2290300 · Cited by 37 · cited 1×
“Recently, several attempts have been made to evaluate the quantitative performance of the systems by experiments in industrial environments: ZigBee [143]–[144], WirelessHART [145]–[148], ISA100.”
BackgroundA Comparison of WirelessHART™ and ISA100.11a
Nixon, M. S., Louis, W. R., & Blvd, H. (2012) · Cited by 37
The room shortage problem of tree-based ZigBee/IEEE 802.15.4 wireless networks
Yen, L., & Tsai, W. (2009) · Computer Communications · doi:10.1016/j.comcom.2009.10.013 · Cited by 35 · cited 1×
“a) ZigBee: The ZigBee standard provides two different routing schemes: tree routing [80], [81] and ad hoc on-demand distance vector (AODV) routing [82], [83].”
BackgroundReal-time communication in WIA-PA industrial wireless networks
Zhong, T., Meng-jin, C., Zeng, P., & Hong, W. (2010) · IEEE International Conference on Computer Science and Information Technology · doi:10.1109/iccsit.2010.5563532 · Cited by 35 · cited 1×
“WIA-PA is designed for measuring, monitoring and open-loop control of industrial processes [48], which correspond to the class 3 to 5.”
BackgroundMeasurements on an industrial wireless HART network supporting PROFIsafe: A case study
Åkerberg, J., Gidlund, M., Reichenbach, F., & Björkman, M. (2011) · doi:10.1109/etfa.2011.6059011 · Cited by 33 · cited 1×
“Recently, several attempts have been made to evaluate the quantitative performance of the systems by experiments in industrial environments: ZigBee [143]–[144], WirelessHART [145]–[148], ISA100.”
BackgroundPerformance evaluation of priority CSMA-CA mechanism on ISA100.11a wireless network
Dinh, N. Q., & Kim, D.-S. (2011) · Computer Standards & Interfaces · doi:10.1016/j.csi.2011.06.001 · Cited by 30
Higuera, J., & Polo, J. L. M. (2011) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2011.2129990 · Cited by 29 · cited 1×
“4 networks communicate directly with other IP devices locally or via an IP network [64] (e.”
BackgroundMasica, K. (2007) · United States. Department of Homeland Security · Cited by 29
Implementation and Experimentation of Industrial Wireless Sensor-Actuator Network Protocols
Sha, M., Gunatilaka, D., Wu, C., & Lu, C. (2015) · Lecture notes in computer science · doi:10.1007/978-3-319-15582-1_15 · Cited by 28 · cited 1×
“A comparative study between graph routing and source routing is carried out in [89].”
BackgroundWang, G. (2011) · Chalmers Publication Library (Chalmers University of Technology) · Cited by 25
Exploiting Backbone Routing Redundancy in Industrial Wireless Systems
Ishii, Y. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2021176 · Cited by 24 · cited 1×
“mesh route discovery) or other specific applications, since a large increase in the number of network wide packets can increase the risks of channel congestion and waste of resources on devices [79].”
BackgroundPerformance evaluation of ISA100.11A industrial wireless network
Rezha, F. P., & Shin, S. Y. (2013) · IET International Conference on Information and Communications Technologies (IETICT) · doi:10.1049/cp.2013.0105 · Cited by 23 · cited 1×
“11a [136]–[140], WIA-PA [141], [142].”
Collision-free multichannel superframe scheduling for IEEE 802.15.4 cluster-tree networks
Jin, X. H., Zhang, Q., Zeng, P., Kong, F., & Xiao, Y. (2014) · International Journal of Sensor Networks · doi:10.1504/ijsnet.2014.064435 · Cited by 22 · cited 1×
“Since implementation of resource allocation has not been defined in WIA-PA, some potential solutions have been proposed [92], [95], [112], [113].”
BackgroundWireless Sensor Network Technologies for Condition Monitoring of Industrial Assets
Giannoulis, S., Koulamas, C., Emmanouilidis, C., Pistofidis, P., & Karampatzakis, D. (2013) · IFIP advances in information and communication technology · doi:10.1007/978-3-642-40361-3_5 · Cited by 21 · cited 1×
“Both versions adopt the backoff mechanism, which can cause a delay in transmission, as well as non-deterministic behaviors [73], [74].”
BackgroundGholami, K. E., Hou, K. M., & Elkamoun, N. (2012) · International Journal of Computer Applications · doi:10.5120/8119-1745 · Cited by 20 · cited 1×
“2) Superframe Structure: Superframe structure is the structure of a superframe which is used to manage the channel access [72].”
BackgroundTrend of Process Automation and Factory Automation
Shin, S. (2006) · SICE-ICASE International Joint Conference · doi:10.1109/sice.2006.315392 · Cited by 19
Industrial wireless standardization — Scope and implementation of ISA SP100 standard
Hasegawa, T., Hayashi, H., Kitai, T., & Sasajima, H. (2011) · Cited by 18
Performance assessment of a WirelessHART network in a real-world testbed
Ferrari, P., Flammini, A., Rinaldi, S., & Sisinni, E. (2012) · IEEE International Instrumentation and Measurement Technology Conference · doi:10.1109/i2mtc.2012.6229177 · Cited by 18 · cited 1×
“Recently, several attempts have been made to evaluate the quantitative performance of the systems by experiments in industrial environments: ZigBee [143]–[144], WirelessHART [145]–[148], ISA100.”
BackgroundImpact of mobility on the management and performance of WirelessHART industrial communications
Montero, S., Gozálvez, J., Sepulcre, M., & Prieto, G. (2012) · IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) · doi:10.1109/etfa.2012.6489704 · Cited by 15 · cited 1×
“Some simulation studies have been carried out to quantitatively assess the performance of these considered standards for industrial applications: ZigBee [125]–[131], WirelessHART [46], [132]–[135], ISA100.”
BackgroundWirelessHART modeling and performance evaluation
Remke, A., & Wu, X. (2013) · International Conference on Dependable Systems & Networks/Proceedings · doi:10.1109/dsn.2013.6575358 · Cited by 15 · cited 1×
“Some simulation studies have been carried out to quantitatively assess the performance of these considered standards for industrial applications: ZigBee [125]–[131], WirelessHART [46], [132]–[135], ISA100.”
BackgroundWireless Coexistence and Spectrum Sensing in Industrial Internet of Things: An Experimental Study
Winter, J. M., Müller, I., Soatti, G., Savazzi, S., Nicoli, M., Becker, L. B., Netto, J. C., & Pereira, C. E. (2015) · International Journal of Distributed Sensor Networks · doi:10.1155/2015/627083 · Cited by 15
Performance evaluation of priority CSMA-CA mechanism on ISA100.11a wireless network
Dinh, N. Q., Kim, S., & Kim, D.-S. (2010) · International Conference on Computer Sciences and Convergence Information Technology · doi:10.1109/iccit.2010.5711205 · Cited by 13
Over the air provisioning of industrial wireless devices using elliptic curve cryptography
Chen, D., Nixon, M. S., Lin, T., Han, S., Zhu, X., Mok, A. K., Xu, R., Deng, J., & Liu, A. (2011) · IEEE International Conference on Computer Science and Automation Engineering · doi:10.1109/csae.2011.5952541 · Cited by 13 · cited 1×
“The OTA method has been investigated for WirelessHART, because in many cases it would be convenient to provision a device over the air before the device initiates its joining sequence [124].”
MethodStudy of routing mechanisms in a WirelessHART network
Winter, J. M., Künzel, G., Müller, I., Pereira, C. E., & Netto, J. C. (2013) · IEEE International Conference on Industrial Technology (ICIT) · doi:10.1109/icit.2013.6505901 · Cited by 13 · cited 1×
“8 s in a two hop communication [90].”
BackgroundKim, S. H., Chong, P. K., & Kim, D. (2014) · IEEE Transactions on Parallel and Distributed Systems · doi:10.1109/tpds.2014.2306418 · Cited by 12
Hardy, L., & Gafen, M. (2008) · International Conference on Networked Sensing Systems · doi:10.1109/inss.2008.4610892 · Cited by 11 · cited 1×
“Although it has advantages in terms of redundancy and spatial diversity, broadcast-based communication, known as flooding, is prohibited in these standards [78].”
BackgroundReal-time message scheduling for ISA100.11a networks
Nhon, T., & Kim, D. (2014) · Computer Standards & Interfaces · doi:10.1016/j.csi.2014.06.003 · Cited by 10 · cited 1×
“11a [108], [109], and both [110], [111].”
Simulation & analysis of WirelessHART nodes for real-time actuator application
Huang, Q., Sikora, A., Groza, V. F., & Zand, P. (2014) · IEEE International Instrumentation and Measurement Technology Conference · doi:10.1109/i2mtc.2014.6861014 · Cited by 10
Time slot schedule based minimum delay graph in TDMA supported wireless industrial system
Chung, Y., Kim, K., & Yoo, S.-W. (2010) · International Conference on Computer Information Systems and Industrial Management Applications (CISIM) · doi:10.1109/cisim.2010.5643651 · Cited by 10 · cited 1×
“11a [108], [109], and both [110], [111].”
Latency and Packet Loss of an Interferred 802.15.4 Channel in an Industrial Environment
Delsing, J., Eliasson, J., & Leijon, V. (2010) · International Conference on Sensor Technologies and Applications · doi:10.1109/sensorcomm.2010.12 · Cited by 10
Performance of IEEE 802.15.4-based wireless sensors in harsh environments
Kadri, A. (2012) · International Wireless Communications and Mobile Computing Conference (IWCMC) · doi:10.1109/iwcmc.2012.6314259 · Cited by 9 · cited 1×
“Some experiments [52]–[54] have been conducted to evaluate the performance of the PHY layer of IEEE 802.”
MethodMulti-channel Data Collection for Throughput Maximization in Wireless Sensor Networks
Chen, Y., Gomes, P. H., & Krishnamachari, B. (2014) · IEEE International Conference on Mobile Ad-Hoc and Sensor Systems (MASS) · doi:10.1109/mass.2014.47 · Cited by 9 · cited 1×
“11a [108], [109], and both [110], [111].”
Research of Adaptive Frequency Hopping Technology in WIA-PA Industrial Wireless Network
Liang, W. G., Liu, S., Yang, Y., & Li, S. (2013) · Communications in computer and information science · doi:10.1007/978-3-642-36252-1_23 · Cited by 9
Performance analysis of ZigBee under WLAN and multiple bluetooth piconets interferences
Fang, F., Sun, J., Han, Y., & Zhu, H. (2012) · International Conference on Information Science and Control Engineering · doi:10.1049/cp.2012.2357 · Cited by 8
Distributed Adaptive Interference-Avoidance Multi-channel MAC Protocol for ZigBee Networks
Yuan, W., Cui, X., & Niemegeers, I. G. M. M. (2010) · IEEE International Conference on Computer and Information Technology (CIT) · doi:10.1109/cit.2010.97 · Cited by 8 · cited 1×
“search for a better channel and move the entire network over under the direction of the coordinator [77].”
BackgroundPerformance evaluation of ZigBee-based sensor networks using empirical measurements
Lee, J., Wang, Y.-M., & Shen, C.-C. (2012) · IEEE International Conference on Cyber Technology in Automation, Control, and Intelligent Systems · doi:10.1109/cyber.2012.6392527 · Cited by 8
Simulation and investigation of Zigbee sensor network with mobility support
Kaur, A., Kaur, J., & Singh, G. (2014) · IEEE International Advance Computing Conference · doi:10.1109/iadcc.2014.6779315 · Cited by 7 · cited 1×
“Some simulation studies have been carried out to quantitatively assess the performance of these considered standards for industrial applications: ZigBee [125]–[131], WirelessHART [46], [132]–[135], ISA100.”
BackgroundResearch and Implementation of the Security Method Based on WIA-PA Standard
Wei, M., Zhang, X., Wang, P., Kim, K., & Kim, Y. (2010) · International Conference on Electrical and Control Engineering · doi:10.1109/icece.2010.389 · Cited by 7
Kammerer, R., & Obermaisser, R. (2014) · CRC Press eBooks · doi:10.1201/b17365-43 · Cited by 7
Modeling and performance evaluation of wirelesshart
Wu, X. (2012) · Cited by 6
Practical vs. Simulated Results of ISA100 Physical Layer
Al-Yami, A., Abu-Al-Saud, W., & Zidouri, A. (2015) · International Conference on Intelligent Systems, Modelling and Simulation · doi:10.1109/isms.2015.47 · Cited by 6 · cited 1×
“11a [149], [150], WIA-PA [151], [152].”
Zhang, X., Luo, Q., Cheng, L., Wan, Y., Song, H., & Yang, Y. (2012) · IEEE Wireless Communications and Networking Conference · doi:10.1109/wcnc.2012.6214090 · Cited by 6
Model based performance estimation in ZigBee based wireless sensor networks
Lohse, F. D.-I., & Zerbe, V. (2010) · IEEE International Conference on Microelectronics (MIEL) · doi:10.1109/miel.2010.5490475 · Cited by 6 · cited 1×
“Some simulation studies have been carried out to quantitatively assess the performance of these considered standards for industrial applications: ZigBee [125]–[131], WirelessHART [46], [132]–[135], ISA100.”
BackgroundSánchez, J. H. (2011) · UPCommons institutional repository (Universitat Politècnica de Catalunya) · Cited by 6
Performance Results and Analysis of ZigBee Networks in the Presence of Multifractal Noise
Woo, L. S., Kinsner, W., Ferens, K., & Diamond, J. E. (2007) · Conference proceedings - Canadian Conference on Electrical and Computer Engineering · doi:10.1109/ccece.2007.236 · Cited by 6
Research of Industrial Wireless Network WIA-PA Multi-path Routing Protocol WMDSR
Meng, L., & Xiao-jie, D. (2011) · International Symposium on Computer Science and Society · doi:10.1109/isccs.2011.22 · Cited by 5 · cited 1×
“11a [136]–[140], WIA-PA [141], [142].”
Wireless Sensor Networks for Automation
Lennvall, T., & Frey, J.-E. (2009) · Industrial information technology series · doi:10.1201/9781439807620.ch27 · Cited by 5
Wireless Sensor Networks for Automation
Frey, J.-E., & Lennvall, T. (2009) · CRC Press eBooks · doi:10.1201/9781439807620-27 · Cited by 5
Performance analysis of 802.15.4 wireless standard
Losavio, E., Orcioni, S., & Conti, M. (2011) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.886978 · Cited by 4 · cited 1×
“Both versions adopt the backoff mechanism, which can cause a delay in transmission, as well as non-deterministic behaviors [73], [74].”
BackgroundWorld's First Wireless Field Instruments Based on ISA100.11a
Yamamoto, S., Maeda, N., Takeuchi, M., & Yonezawa, M. (2010) · Cited by 4
Ji, P., Liang, W. G., Zhang, X., & Zheng, M. (2014) · Communications in computer and information science · doi:10.1007/978-3-642-54522-1_28 · Cited by 3 · cited 2×
“Several papers [92]–[95] proposed such algorithms.”
BackgroundWireless sensor network - performance evaluation in the field
Batra, K., & Srivastava, S. (2012) · International Conference on Power, Control and Embedded Systems · doi:10.1109/icpces.2012.6508063 · Cited by 3 · cited 1×
“11a [149], [150], WIA-PA [151], [152].”
An Innovative Time Synchronization Algorithm for Wireless HART Networks
Li, D., Sheng, Z., Houming, W., & Xiaokang, L. (2012) · Advances in intelligent and soft computing · doi:10.1007/978-3-642-27329-2_36 · Cited by 2
Real-Time Cluster Resources Scheduling Strategy in WIA-PA Networks
Sun, Y. P., Fang, M. J., & Sun, J. H. (2014) · Advanced materials research · doi:10.4028/www.scientific.net/amr.989-994.4253 · Cited by 2 · cited 2×
“Several papers [92]–[95] proposed such algorithms.”
BackgroundA Fast Real-Time Scheduling Algorithm for WIA-PA
Jin, X. H., & Zeng, P. (2014) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.519-520.124 · Cited by 2 · cited 1×
“Since implementation of resource allocation has not been defined in WIA-PA, some potential solutions have been proposed [92], [95], [112], [113].”
BackgroundDesign a Implementation of Time Synchronization for Real-Time WirelessHART network
Mangalarapu, C. K., & Alyass, T. (2011) · Cited by 1
Reliability of ZigBee networks under broadband electromagnetic noise interference
Woo, L. S., Ferens, K., & Kinsner, W. (2010) · Conference proceedings - Canadian Conference on Electrical and Computer Engineering · doi:10.1109/ccece.2010.5575135 · Cited by 1
Wireless Sensor Networks for Automation
Lennvall, T., Frey, J.-E., & Gidlund, M. (2014) · CRC Press eBooks · doi:10.1201/b17365-38 · Cited by 1
Research works printed but not linked: 18
- 2005, IEEE Standard for Information Technology - Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 15 1 Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Wireless Personal Area Networks (WPANs)
- 2012, Global Industrial Automation—Research & Analytics
- 2014, Industrial Automation How the Internet of Things and Digitalization Change the Market and Drive Growth
- 0, WIA-PA Communication Network and Communication Profile
- 2007, ZigBee PRO Specification
- 2009, Wireless Systems for Industrial Automation Process Control and Related Applications
- 2006, IEEE 802 15 4-2006 Standard Part 15 4 Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low-Rate Wireless Personal Area Networks (LR-WPANs)
- 10.1002/wcm.976 · DOI
- hatler, 2015, Web Exclusive Industrial Wireless Sensor Networks Trends and Developments
- kinney, 0, ISA100 11a
- 10.1016/j.csi.2011.06.001 · DOI
- lei, 0, Research of industrial wireless network WIA-PA multi-path routing protocol WMDSR, Int Symp Computer Science and Society (ISCCS), 51
- 10.1109/wfcs.2008.4638746 · DOI · Paper page
- 0, The Technology Behind the ISA100 11a Standard—An Exploration
- 2007, HART Field Communication Protocol Specification
- 2012, Wireless Communications in Safety Systems
- mathur, 2014, Understanding Safety Integrity Level (SIL) and It’s Effects
- 2013, OneWireless
Cited by
Wireless Network Design for Control Systems: A Survey
Park, P., Coleri Ergen, S., Fischione, C., Lu, C., & Johansson, K. H. (2018) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2017.2780114 · Cited by 488
Digital Twin: A Comprehensive Survey of Security Threats
Alcaraz, C., & Lopez, J. (2022) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2022.3171465 · Cited by 340
Industrial Communication Systems and Their Future Challenges: Next-Generation Ethernet, IIoT, and 5G
Vitturi, S., Zunino, C., & Sauter, T. (2019) · Proceedings of the IEEE · doi:10.1109/jproc.2019.2913443 · Cited by 380
“[20] Q. Wang and J. Jiang, “Comparative examination on architecture and protocol of industrial wireless sensor network standards,” IEEE Commun.”
BackgroundInfluentialData Management in Industry 4.0: State of the Art and Open Challenges
Raptis, T. P., Passarella, A., & Conti, M. (2019) · IEEE Access · doi:10.1109/access.2019.2929296 · Cited by 232
“Reference [32] discusses key aspects of the four most popular industrial wireless sensor network standards:”
BackgroundThe Internet of Robotic Things: A review of concept, added value and applications
Simoens, P., Dragone, M., & Saffiotti, A. (2018) · International Journal of Advanced Robotic Systems · doi:10.1177/1729881418759424 · Cited by 233
“IoT protocols such as WirelessHart or Zigbee Pro were designed to address the industry concerns on reliability, security and cost.(105) When Figure 7.”
Method
Metadata
- Authors
- Wang, Q., & Jiang, J.
- Affiliations
- Western University (CA)
- ORCID
- Venue
- IEEE Communications Surveys & Tutorials
- Published
- 2016
- Volume
- 18
- Issue
- 3
- Pages
- 2197-2219
- ISSN
- 1553-877X (ISSN-L)
- 2373-745X
- OpenAlex
- W2328689326
- Cited by
- 182
- References
- 138
- Citations by year
- 2026: 2 · 2025: 8 · 2024: 17 · 2023: 17 · 2022: 21 · 2021: 23 · 2020: 25 · 2019: 26 · 2018: 27 · 2017: 15 · 2016: 1
- FWCI
- 19.35
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Communications Surveys & Tutorials (publishedVersion)
- Funders
- Natural Sciences and Engineering Research Council of Canada
- UNENE
- ISTP Canada
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Wireless Sensor Networks and IoT
- Physical Sciences › Computer Science › Computer Networks and Communications › Energy Efficient Wireless Sensor Networks
- Physical Sciences › Engineering › Control and Systems Engineering › Industrial Automation and Control Systems
- Keywords
- industrial wireless sensor networks, ZigBee, WirelessHART, ISA100.11a, WIA-PA, protocol architecture, protocol layers, industrial communication, standard comparison
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.