Comparative Examination on Architecture and Protocol of Industrial Wireless Sensor Network Standards
The DOI matches its Crossref record; 133 of the 138 references it cites were found in a registry or an index.
Abstract
This paper discusses key aspects of the four most popular industrial wireless sensor network standards: ZigBee, WirelessHART, ISA100.11a, and WIA-PA. The detailed design and protocol architectures are comparatively examined. The uniqueness of each standard is highlighted and justifications for their design are provided. Similarities and differences among these standards at each protocol layer are compared. With consideration of the scopes and the limitations of these standards, the suitability of these standards to meet the industrial requirements has also been examined.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The IEEE working group (WG) [36,37,38,60,61] are actively working on improvements and standardization of communication technologies supporting IIoT use cases.”
From Industrial IoT, Cyber Threats, and Standards Landscape: Evaluation and Roadmap (2021) · cites this paper as [37]
In the citing paper
“This can be accomplished by implementing industrial blockchain technology to meet the required levels of security, openness, and decentralization [37].”
From Industrial IoT, Cyber Threats, and Standards Landscape: Evaluation and Roadmap (2021) · cites this paper as [37]
Citations
Cites
Ad hoc On-Demand Distance Vector (AODV) Routing
Perkins, C., Belding-Royer, E., & Das, S. (2003) · doi:10.17487/rfc3561 · Cited by 10,686 · cited 1×
“a) ZigBee: The ZigBee standard provides two different routing schemes: tree routing [80], [81] and ad hoc on-demand distance vector (AODV) routing [82], [83].”
BackgroundWireless sensor network survey
Yick, J., Mukherjee, B., & Ghosal, D. (2008) · Computer Networks · doi:10.1016/j.comnet.2008.04.002 · Cited by 6,255
Wireless sensor networks for habitat monitoring
Mainwaring, A., Culler, D., Polastre, J., Szewczyk, R., & Anderson, J. (2002) · Proceedings of the 1st ACM international workshop on Wireless sensor networks and applications · doi:10.1145/570738.570751 · Cited by 4,166 · cited 1×
“During the past decade, WSNs had found their way into a wide variety of applications [3], such as health monitoring of civil infrastructures [4], personal health monitoring [5], smart grid [6], agriculture [7], habitat monitoring [8], and industrial automation [9].”
BackgroundWireless mesh networks: a survey
Akyildiz, I. F., Wang, X., & Wang, W. (2005) · Computer Networks · doi:10.1016/j.comnet.2004.12.001 · Cited by 4,007 · cited 1×
“Meanwhile, the mesh topology is associated with some intelligence (such as self-forming, self-healing, and self-organization) [97], in order to provide more benefits, such as flexible network architecture, easy deployment and configuration, fault tolerance, and”
BackgroundSensor networks: Evolution, opportunities, and challenges
Chong, C.-Y., & Kumar, S. P. (2003) · Proceedings of the IEEE · doi:10.1109/jproc.2003.814918 · Cited by 3,079 · cited 1×
“The design of a WSN depends significantly on the requirements of particular applications [2], since different applications may have different requirements and objectives.”
BackgroundIndustrial Wireless Sensor Networks: Challenges, Design Principles, and Technical Approaches
Gungor, V. C., & Hancke, G. P. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2015754 · Cited by 1,669 · cited 2×
“Unlike office networks, an industrial environment is prone to unpredictable variations in temperature, pressure, humidity, vibrations, and the presence of heavy metal objects [9].”
BackgroundPerformance comparison of two on-demand routing protocols for ad hoc networks
Perkins, C. E., Royer, E. M., Das, S. R., & Marina, M. K. (2001) · IEEE Personal Communications · doi:10.1109/98.904895 · Cited by 1,491
Opportunities and Challenges of Wireless Sensor Networks in Smart Grid
Gungor, V. C., Lu, B., & Hancke, G. P. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2039455 · Cited by 1,368 · cited 1×
“During the past decade, WSNs had found their way into a wide variety of applications [3], such as health monitoring of civil infrastructures [4], personal health monitoring [5], smart grid [6], agriculture [7], habitat monitoring [8], and industrial automation [9].”
BackgroundWireless sensor networks for personal health monitoring: Issues and an implementation
Milenković, A., Otto, C., & Jovanov, E. (2006) · Computer Communications · doi:10.1016/j.comcom.2006.02.011 · Cited by 1,023 · cited 1×
“During the past decade, WSNs had found their way into a wide variety of applications [3], such as health monitoring of civil infrastructures [4], personal health monitoring [5], smart grid [6], agriculture [7], habitat monitoring [8], and industrial automation [9].”
BackgroundTime synchronization in sensor networks: a survey
Sivrikaya, F., & Yener, B. (2004) · IEEE Network · doi:10.1109/mnet.2004.1316761 · Cited by 851 · cited 1×
“tion in a sensor network aims at providing a common time scale for local clocks within the nodes in the network [99].”
Background
Research works printed but not linked: 18
- 2005, IEEE Standard for Information Technology - Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 15 1 Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Wireless Personal Area Networks (WPANs)
- 2012, Global Industrial Automation—Research & Analytics
- 2014, Industrial Automation How the Internet of Things and Digitalization Change the Market and Drive Growth
- 0, WIA-PA Communication Network and Communication Profile
- 2007, ZigBee PRO Specification
- 2009, Wireless Systems for Industrial Automation Process Control and Related Applications
- 2006, IEEE 802 15 4-2006 Standard Part 15 4 Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low-Rate Wireless Personal Area Networks (LR-WPANs)
- 10.1002/wcm.976 · DOI
- hatler, 2015, Web Exclusive Industrial Wireless Sensor Networks Trends and Developments
- kinney, 0, ISA100 11a
- 10.1016/j.csi.2011.06.001 · DOI
- lei, 0, Research of industrial wireless network WIA-PA multi-path routing protocol WMDSR, Int Symp Computer Science and Society (ISCCS), 51
- 10.1109/wfcs.2008.4638746 · DOI · Paper page
- 0, The Technology Behind the ISA100 11a Standard—An Exploration
- 2007, HART Field Communication Protocol Specification
- 2012, Wireless Communications in Safety Systems
- mathur, 2014, Understanding Safety Integrity Level (SIL) and It’s Effects
- 2013, OneWireless
Cited by
Items 101–188 of 188
Performance Analysis and Prediction of 5G Round-Trip Time Based on the VMD-LSTM Method
Zhu, S., Zhou, S. T., Wang, L., Zang, C., Liu, Y., & Liu, Q. (2024) · Sensors · doi:10.3390/s24206542 · Cited by 9
“…networks better meet the current industrial demand for device mobility, leading researchers to explore their applications in the sector [5–9] and propose standards such as industrial wireless sensor networks [5] and WIA-FA for factory automation [6], which feature lower transmission latency.”
BackgroundKumar, P. S., Xie, L., Soong, B., & Lee, M. Y. (2018) · IEEE Sensors Journal · doi:10.1109/jsen.2018.2821266 · Cited by 8
“wireless protocol standards have been developed targeting industrial applications [11].”
BackgroundSecuring WirelessHART: Monitoring, Exploring and Detecting New Vulnerabilities
Raposo, D., Rodrigues, A., Sinche, S., Silva, J. S., & Boavida, F. (2018) · IEEE International Symposium on Network Computing and Applications (NCA) · doi:10.1109/nca.2018.8548060 · Cited by 6
“In [10] the authors present an exhaustive analysis of the industrial wireless standards.”
BackgroundEmerging wireless communication technologies for smart grid applications
Kabalcı, E., & Kabalcı, Y. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-819710-3.00005-3 · Cited by 6
A Perspective of Emerging Technologies for Industrial Internet
Guo, M., Chen, Y., Shi, J. C., Wang, W., Zhang, Y., Zhao, L. Y., & Chen, L. (2019) · IEEE International Conference on Industrial Internet (ICII) · doi:10.1109/icii.2019.00065 · Cited by 8
“WSN can be used in multiple application fields, such as health monitoring, habitat monitoring, agriculture, industrial automation, industrial internet [52].”
MethodFastest adaptive estimation algorithms for topological structure errors in smart grid networks
Xu, H.-H. (2020) · Computer Communications · doi:10.1016/j.comcom.2020.05.042 · Cited by 6
Wang, H., Xiong, Q., & Li, M. (2018) · IEEE Communications Letters · doi:10.1109/lcomm.2018.2873643 · Cited by 6
“As presented in [9], nodes in practical IWSNs usually have pre-scheduled transmission cycles and such cycle keeps unchanged in common scenarios.”
BackgroundIntelligent Logistics Tracking System Based on Wireless Sensor Network
Han, X. (2021) · International Journal of Frontiers in Engineering Technology · doi:10.25236/ijfet.2021.031006 · Cited by 5
“The radio frequency tag is not afraid of oil stains and dust pollution, and can work in a variety of harsh environments [15].”
BackgroundSarvghadi, M. A., & Wan, T. (2022) · IEEE Internet of Things Journal · doi:10.1109/jiot.2022.3232335 · Cited by 5
“Of the standard protocols defined for WSNs, IEEE 802.15 .4 and ZigBee in particular can support hundreds or even thousands of sensor nodes in multihop configurations [1].”
InfluentialSpiral dynamic algorithm based optimal PPI controller for WirelessHART networked systems
Hassan, S. M., Ibrahim, R., Saad, N. B., Asirvadam, V. S., & Bingi, K. (2017) · IEEE International Symposium in Robotics and Manufacturing Automation (ROMA) · doi:10.1109/roma.2017.8231729 · Cited by 5
“11a) and wireless network for industrial automationprocess automation (WIA-PA) with international electrotechnical commission (IEC) certification as standards IEC62591, IEC62734 and IEC62601 respectively [1, 2].”
BackgroundHigh Performance 60 GHz Beamforming Antenna Array For 5G and Beyond Industrial Applications
Jabbar, A., Abbasi, M. A. B., Pang, Z., Imran, M. A., & Rehman, M. U. (2023) · European Conference on Antennas and Propagation · doi:10.23919/eucap57121.2023.10133620 · Cited by 5
“Moreover, the traditional existing sub-6 GHz wireless solutions like WiFi and 4G are unable to meet latency and throughput requirements [5].”
A Multi-Node Detection Algorithm Based on Serial and Threshold in Intelligent Sensor Networks
Zhang, G., Gu, Z., Zhao, Q., Ren, J., Han, S., & Lu, W. (2020) · Sensors · doi:10.3390/s20071960 · Cited by 5
“Intelligent sensor networks are widely used in military, tra ffi c, environmental monitoring, medical and other aspects because of their flexible network settings and simple equipment location modification [2,3].”
BackgroundComparative evaluation of six wireless sensor devices in a high ionizing radiation environment
Huang, Q., Jiang, J., & Deng, Y. (2020) · IET Wireless Sensor Systems · doi:10.1049/iet-wss.2020.0035 · Cited by 5
Self-citationSensor Design Based on Wireless Measurement of Corrosion Monitoring of Reinforced Concrete Structure
Ren, Z., Zhong, B. Q., & Xiong, R. (2022) · Wireless Communications and Mobile Computing · doi:10.1155/2022/2608490 · Cited by 5
“Wang and Jiang introduced the nuclear magnetic resonance (NMR) technology in the field of chemical and biological analysis of steel corrosion in concrete [9], the use of homemade sol gel-sensitive probe and commercial wafer pH-sensitive probe solution and experiment of concrete and steel is put forward to detection, L…”
BackgroundEvaluation of a Link Quality Estimator in an Outdoor WSN Using a Dedicated Node
Gomes, E. B., Gomes, R. D., & da Fonseca, I. E. (2019) · IEEE Symposium on Computers and Communications (ISCC) · doi:10.1109/iscc47284.2019.8969712 · Cited by 5
Wireless Sensor Networks Security: State of the ArtPreprint
Al-Rakhami, M. S., & Almowuena, S. (2018) · arXiv (Cornell University) · doi:10.48550/arxiv.1808.05272 · Cited by 5
“Secure Routing [113] [114] [115] [116] [117] [118] [119] [120] [121] [122] [123] [124] [125] [126] [127] [128] Secure Localization [129] [130] [131] [132] [129] [133] [134] [135] [136] [137] [138] [139] [140] [141] [142] [129]”
Computational-Intelligence-Based Scheduling with Edge Computing in Cyber–Physical Production Systems
Xia, C., Jin, X. H., Xu, C., & Zeng, P. (2023) · Entropy · doi:10.3390/e25121640 · Cited by 4
“…due to the requirements for ultralow latency (10 ms) and ultrahigh reliability (99.9999% in wireless transmission) of the control instructions [5], current cloud-based scheduling models and CI methods with random characteristics cannot be effectively applied for operation-level control.”
BackgroundInfluentialKey Issues on Integrating 5G into Industrial Systems
Sun, J., Chen, D., Wang, Q., Lei, C., Wang, M., Li, Z., Xiao, Y., Zhang, W., & Liu, J. (2024) · Electronics · doi:10.3390/electronics13112048 · Cited by 4
Self-citationFusion of heterogeneous industrial wireless networks: A survey
Lei, J., Jiang, P., Kong, L., Xu, C., Xu, C., Lin, K., Cai, Y., Su, Y., Ding, W., Wang, Z., et al. (2024) · Computer Networks · doi:10.1016/j.comnet.2024.110929 · Cited by 4
Application of Federated Learning in Industrial Internet with Device Identifier
Zhang, X., & Hou, H. (2021) · IEEE International Symposium on Broadband Multimedia Systems and Broadcasting (BMSB) · doi:10.1109/bmsb53066.2021.9547143 · Cited by 4
Low-Level Wireless and Sensor Networks for Industry 4.0 Communication – Presentation
Kampen, A.-L., Fojcik, M., Cupek, R., & Stój, J. (2021) · Communications in computer and information science · doi:10.1007/978-3-030-88113-9_38 · Cited by 4
Comparison Between Wired and WirelessHART Networked PID Control of Process Flow
Chien, L. J., Ibrahim, R., Hassan, S. M., Bingi, K., & Supramaniam, T. (2018) · International Conference on Intelligent and Advanced Systems · doi:10.1109/icias.2018.8540639 · Cited by 4
“11a, WirelessHART and Wireless Networks for Industrial Automation-Process Automation (WIA-PA) are currently available in the market [2].”
BackgroundMultiprocessor Scheduling meets the Industrial Wireless
Gaitán, M. G., & Yomsi, P. M. (2019) · U Porto Journal of Engineering · doi:10.24840/2183-6493_005.001_0005 · Cited by 4
“A similar approach for singlecriticality wireless industrial networks was presented by Xia et al. (2017a), still assuming an EDF scheduler. Here, the authors based their analysis on the Demand-Bound Function (DBF) to estimate the demand of the network flows. Although DBF is a widely adopted method in the multiprocesso…”
BackgroundMethodSDN-Enabled Value-Based Traffic Management Mechanism in Resource-Constrained Sensor Devices
Alipio, M., Co, A. G. A., Hilario, M. F. C., & Pama, C. M. C. (2019) · International Conference on Information Networking · doi:10.1109/icoin.2019.8718140 · Cited by 4
“Each sensor device performs physical event monitoring and simultaneously plays a role as forwarding, queuing and routing traffic flows [1].”
BackgroundQiu, Y. N., Ke, J., Liang, C., Jia, Y., Xu, W., & Chen, H. (2021) · IEEE Network · doi:10.1109/mnet.011.2100111 · Cited by 4
“However, the existence of the centralized management nodes in a network is prone to single point of failure and may affect overall reliability of the whole network [4, 5].”
BackgroundShort Blocklength Coding and Cloud Controller Design: an AGV Example
Qiao, Y., Fu, Y., Yuan, M., & Yang, G. (2021) · China Automation Congress (CAC) · doi:10.1109/cac53003.2021.9728548 · Cited by 4
Implementation of flow control over WirelessHART sensor network using WirelessHART adaptors
Hassan, S. M., Bingi, K., Ibrahim, R., Chein, L. J., & Supramaniam, T. (2019) · Indonesian Journal of Electrical Engineering and Computer Science · doi:10.11591/ijeecs.v15.i2.pp910-919 · Cited by 4
“INTRODUCTION Recent advances in wireless sensor networks (WSNs) have attracted keen interest by researchers [1-5].”
BackgroundQu, F., Zhang, J., Shao, Z., & Qi, S. (2017) · IEEE International Conference on Computer and Communications (ICCC) · doi:10.1109/compcomm.2017.8322613 · Cited by 3
“4 protocol is usually used for field-level industrial network, such as ZigBee, WIA-PA, WirelessHart and so on [6].”
Methodde Jesus, M. A., Laghari, A. A., Khan, A. A., Jumani, A. K., Shabaz, M., Deshpande, A. B., Aroma, R. J., Raimond, K., & Khan, A. (2024) · Wiley eBooks · doi:10.1002/9781394196470.ch14 · Cited by 3
Raj, N., Sukumaran, V. B., & Sharma, P. (2024) · IEEE Internet of Things Journal · doi:10.1109/jiot.2024.3523024 · Cited by 3
“Deterministic scheduling is also supported by industrial wireless standards, such as WirelessHART [22], ISA100.”
Transmission performance analysis of wireless sensor networks under complex railway environment
Chen, R., Shi, T., & Lv, X. (2017) · Chinese Control and Decision Conference (CCDC) · doi:10.1109/ccdc.2017.7979018 · Cited by 3
“Wireless sensor networks (WSNs) are formed with selforganizing sensor nodes equipped with the transceivers working cooperatively to monitor certain environments [1].”
BackgroundA Cross-Network Clock Synchronization Scheme With Low Complexity for Industrial Internet of Things
Wang, H., Zhong, Y., Qian, P., & Wang, P. (2018) · Chinese Automation Congress · doi:10.1109/cac.2018.8623362 · Cited by 3
“4 as the physical layer, key technologies such as hopping channel, deterministic scheduling and clock synchronization are supported [4], [5].”
BackgroundGandara, R. B., & Alaydrus, M. (2019) · International Conference on Quality in Research (QiR): International Symposium on Electrical and Computer Engineering · doi:10.1109/qir.2019.8898287 · Cited by 3
“Security safeguards conducted for WSN as based on the previous study [2][3] informed tha,t most WSN uses block cipher encryption technique as a method of securing data, which been carried out in the upper layer structure of the WSN.”
MethodAdaptive Channel Map for Time Slotted Channel Hopping Industrial Wireless Networks
Feldman, M., Cainelli, G. P., Künzel, G., Müller, I., & Pereira, C. E. (2020) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2020.12.1975 · Cited by 3
DeP-D: A Decentralized Primal-Dual Optimization Algorithm for Industrial Wireless Sensor Networks
Farag, H. M., Gidlund, M., & Österberg, P. (2019) · IEEE International Workshop on Factory Communication Systems (WFCS) · doi:10.1109/wfcs.2019.8757934 · Cited by 3
“The standards specify mechanisms for reliable communications in multi-hop scenarios, such as frequency hopping and retries [3], source routing and graph routing mechanisms [4].”
BackgroundGuaranteed Time Slot Allocation for IEEE 802.15.4-Based Wireless Feedback Control Systems
Kobayashi, K., Okada, H., & Katayama, M. (2019) · IEEE Access · doi:10.1109/access.2019.2951597 · Cited by 3
A Priority-Enhanced Slot Allocation MAC Protocol for Industrial Wireless Sensor Networks
Liu, L., Cao, Y., Ding, L., Yang, F., Qian, L., & Zhi, C. (2019) · Asia-Pacific Conference on Communications (APCC) · doi:10.1109/apcc47188.2019.9026525 · Cited by 3
“Safety traffic usually refers to unpredictable emergency actions such as emergency shutdown and automatic fire control [3], which requires the most stringent delay and communication reliability.”
BackgroundMethodInfluentialTrustworthy design architecture: Cyber-physical system
Choi, S. H., Chavez, A., Torres, M., Kwon, C., & Hwang, I. (2017) · IEEE International Carnahan Conference on Security Technology (ICCST) · doi:10.1109/ccst.2017.8167827 · Cited by 2
“A current trend within industrial networking implements fieldbus protocols using wireless technologies due to significant cost savings in replacing aging wired infrastructure [2].”
BackgroundPu, C., Wei, M., Wang, P., & 홍승호 (2026) · Journal of King Saud University - Computer and Information Sciences · doi:10.1007/s44443-026-00982-2 · Cited by 2
“Since the three major IWSN standards share IEEE 802.15.4 PHY/MAC and operate in the license-free 2.4 GHz industrial, scientific and medical (ISM) band (Wang and Jiang2016),unmanagedcoexistenceinevitablyleadstointer-network interference and contention over limited spectrum resources, which can…”
InfluentialValue-based utility implementation in software-defined testbed for sensor data traffic management
Alipio, M., Co, A. G. A., Hilario, M. F. C., & Pama, C. M. C. (2019) · Future Generation Computer Systems · doi:10.1016/j.future.2019.07.041 · Cited by 2
Investigating the Performance of Bluetooth Technology by Sensor Monitoring in Industrial WSN
Jain, R. (2023) · World Conference on Communication & Computing (WCONF) · doi:10.1109/wconf58270.2023.10235061 · Cited by 2
“Additionally, modifications to the Bluetooth protocol, such as LE Secure Connections, must be made in order to ensure the highest levels of security [14].”
MethodCHR: A Novel Channel-Hopping-Based Retransmission Scheme in WIA-FA Networks
Zheng, M., Zhao, Y., & Liang, W. G. (2023) · IEEE Internet of Things Journal · doi:10.1109/jiot.2023.3314438 · Cited by 2
“Control systems for FA are programmable logic controllers which instruct machines via on/off signals to execute discrete motions [7], [8], [9].”
BackgroundA Survey on Wireless Communication and Power Transfer Systems for Space Applications
Castrillo, V. U., Fusco, F., Giannetta, H., Albano, M., & Cavallini, E. (2024) · IEEE International Workshop on Metrology for AeroSpace (MetroAeroSpace) · doi:10.1109/metroaerospace61015.2024.10591585 · Cited by 2
“11a and WIA-PA [4], [5], [6] are standards for industrial applications (see Tab.”
BackgroundSensors, Actuators, Wireless Sensor Networks, and the Internet of Things
Eteng, A. A. (2025) · Wiley eBooks · doi:10.1002/9781394280490.ch4 · Cited by 2
Suitability of Communication Technologies for Harvester-Powered IoT-Nodes
Krug, S., Bader, S., Oelmann, B., & O’Nils, M. (2019) · IEEE International Workshop on Factory Communication Systems (WFCS) · doi:10.1109/wfcs.2019.8758042 · Cited by 2
“Especially control applications require deterministic delays between 10 and 100 ms [26].”
BackgroundQoS Provisioning in 60 GHz Communications by Physical and Transport Layer Coordination
Drago, M., Polese, M., Kučera, Š., Kozlov, D. S., Kirillov, V. V., & Zorzi, M. (2019) · IEEE International Conference on Mobile Ad-Hoc and Sensor Systems (MASS) · doi:10.1109/mass.2019.00044 · Cited by 2
“Additionally, future wireless networks will serve new verticals that so far have generally relied on wired communications, such as, for example, industrial automation, in order to provide lower deployment costs, re-configurability of the factory and flexibility in the mobility of the equipment [2].”
BackgroundLow Power WSN Protocol for Smart Green Homes
Teixeira, E., Pedreiras, P., & Mota, A. M. (2019) · IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) · doi:10.1109/etfa.2019.8869512 · Cited by 2
“They have enhanced MAC functions such as slot synchronization, synchronized TDMA and CSMA phases, blacklisting and channel hopping, which provide a grade of reliability and determinism that allow its use in more demanding industrial setups [7].”
BackgroundDeterministic Scheduling With Packet Aggregation in Industrial Internet of Things
Wang, H., Hu, J., Tan, S., & Shi, T. (2020) · International Conference on Information and Communication Technology Convergence (ICTC) · doi:10.1109/ictc49870.2020.9289515 · Cited by 2
“11a, and WIA-PA are the typical industrial wireless network standards for the IIoT [2].”
BackgroundEngineering operation management technology based on network automation configuration visualization
Ji, Z. (2021) · International Journal of Systems Assurance Engineering and Management · doi:10.1007/s13198-021-01093-z · Cited by 2
“11a and WIA-PA, compared their detailed design and protocol architecture, and inspected the applicability of these standards to meet industrial requirements (Wang and Jiang 2016).”
BackgroundThe Management Mode of College Students' Mental Health Based on Wireless Sensor Network
Wang, P. (2022) · International Journal of Frontiers in Sociology · doi:10.25236/ijfs.2022.040212 · Cited by 2
Morin, É. (2018) · theses.fr (ABES) · doi:10.70675/4a850bedzbe05z4ce3z8902z02ff7b2bc044 · Cited by 2
2016 Index IEEE Communications Surveys & Tutorials Vol. 18
(2016) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2016.2637412 · Cited by 2
Software Emulator to Provide the Interoperability of Wireless Sensor Networks Protocols
Yousef, F. J. (2024) · International Youth Conference on Radio Electronics, Electrical and Power Engineering (REEPE) · doi:10.1109/reepe60449.2024.10479792 · Cited by 1
“The frame formats of the standards (ZigBee [13]–[18] , Wi-Fi [15],[16],[19]–[21] and WirelessHART [12],[14],[15],[22],[23]) at the data link layer are outlined in Table I. Based on frame formats analysis of the all standards that given in Table I, it is noted that some fields and headers are…”
MethodHe, A. (2017) · Scholarship@Western (Western University) · Cited by 1
A Scalable and Secure MANET for an i-Voting System
Siddiquee, K. N. E. A., Andersson, K., Khan, F. F., & Hossain, M. S. (2017) · Diva portal (Dalarna University Library) · doi:10.22667/jowua.2017.09.30.001 · Cited by 1
“Mobility of nodes has an impact on routing [8, 11].”
BackgroundInfluentialGandara, R. B. (2018) · InComTech Jurnal Telekomunikasi dan Komputer · doi:10.22441/incomtech.v8i3.5674 · Cited by 1
“Standar metode pengamanan yang dilakukan pada WSN seperti pada penelitian [2][3] menjelaskan bahwa sebagian besar menggunakan metode enkripsi dan prosesnya dilakukan pada struktur lapisan bagian atas (upper layer) setelah lapisan fisik (physical layer) WSN seperti pada penjelasan Tabel 1.”
BackgroundMethod for Link Stability Evaluation of Industrial Wireless Sensor Networks (ISA 100.11a)
Florêncio, H. M. (2019) · PRZEGLĄD ELEKTROTECHNICZNY · doi:10.15199/48.2019.11.45 · Cited by 1
“Acording to [20], multiple backbone routers provide similar benefits, including reducing data traffic congestion, reducing latency, and increasing network reliability.”
BackgroundOverview of Industrial Wireless Networks
Yu, H., Zeng, P., Zheng, M., Xu, C., Jin, X. H., & Liang, W. G. (2023) · Wireless networks · doi:10.1007/978-981-99-0389-4_1 · Cited by 1
Insights into Risk Management: Leveraging Digital Twins for Ophthalmic Diagnosis
Iliuţă, M.-E., Moisescu, M. A., Pop, E., & Mitulescu, T.-C. (2024) · International Conference on Electronics, Computers and Artificial Intelligence (ECAI) · doi:10.1109/ecai61503.2024.10607468 · Cited by 1
Chen, H.-H., Chen, C.-Y., Yang, C.-W., & Hsieh, H. (2024) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2024.3491834 · Cited by 1
“…a large number of machines (sensors) for data collection without or with very little human intervention, have emerged as a new communication paradigm for supporting Internet of Things (IoT) applications, including industrial automation [1], autonomous vehicles [2], and environmental monitoring [3].”
Chehaitly, M., Tabaa, M., Borras, J. Q., Monteiro, F., & Chatzinotas, S. (2024) · Research Square · doi:10.21203/rs.3.rs-3967383/v1 · Cited by 1
Zhou, J., & Tian, M. (2017) · International Conference on Intelligent Human-Machine Systems and Cybernetics · doi:10.1109/ihmsc.2017.8
“SOWSNs has been widely used in many important areas such as target detection and tracking, automated assistance for the elderly monitors, person locator services, environmental, building monitoring and control, military affairs and many other areas [4].”
MethodReliable wireless MAC layer for industrial internet of things using polarisation diversity
Kalle, R. K. (2018) · International Journal of Digital Enterprise Technology · doi:10.1504/ijdet.2018.092636
An Effective Routing Algorithm to Enhance Efficiency with WSN
Gracios, A., & Jhapate, P. A. (2018) · International Journal of Trend in Scientific Research and Development · doi:10.31142/ijtsrd10879
PI‐based and anti‐windup transmission power control for WirelessHART field devices
da Silva, R. W. P., Eckhard, D., & Müller, I. (2020) · IET Wireless Sensor Systems · doi:10.1049/iet-wss.2018.5040
“For a comparison of the main characteristics of these three standards, see [4, 5] for further comparison, also including ZigBee networks.”
BackgroundMethodMethod for Detecting Transmission Link Failure in Industrial Wireless Networks
Radke, L. M., Cainelli, G. P., Feldman, M., Pereira, C. E., Netto, J. C., & Müller, I. (2020) · Congresso Brasileiro de Automática · doi:10.48011/asba.v2i1.1463
“Each protocol has its own characteristics, but all of them use the IEEE 802.15.4 standard on the physical layer, see Wang and Jiang (2016).”
MethodInfluentialSangeetha, S., Karunkuzhali, D., Devi, B. R. S., Anand, M. S., Suganthi, S., & Ramprabu, G. (2021) · Journal of Ambient Intelligence and Humanized Computing · doi:10.1007/s12652-021-03203-y
Hassan, S. M., Ibrahim, R., Saad, N. B., Bingi, K., & Asirvadam, V. S. (2020) · Studies in systems, decision and control · doi:10.1007/978-3-030-47737-0_1
Tool and Method for Obtaining End-to-End Reliability Parameters of Wireless Industrial Networks
Krötz, C. A., Feldman, M., Cainelli, G. P., Künzel, G., Pereira, C. E., & Müller, I. (2023) · IFIP advances in information and communication technology · doi:10.1007/978-3-031-26500-6_7
Edge-assisted Transmission for 5G Enabled Industrial Network Systems
Lyu, L., Guan, X., Cheng, N., & Shen, X. (2023) · Wireless networks · doi:10.1007/978-3-031-26963-9_4
Ethernet Information Security Protocols Based on Industrial Control Wireless Sensor Networks
Yin, X., Zhang, S., Li, F., & Xu, G. (2023) · Journal of Sensors · doi:10.1155/2023/4619556
Wei, M., Liu, C., Wang, J., & Yang, S. (2023) · Electronics · doi:10.3390/electronics12112418
-, A. S., & Kumar, M. (2023) · International Journal For Multidisciplinary Research · doi:10.36948/ijfmr.2023.v05i04.4835
“They have examined, compared and highlighted the uniqueness of each of them[18].”
BackgroundFusion of Heterogeneous Industrial Wireless Networks: A SurveyPreprint
Lei, J., Kong, L., Xu, C., Xu, C., Lin, K., Cai, Y., Su, Y., Ding, W., Wang, Z., Li, B., et al. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4618567
An Efficient RT-MAC Protocol in Wireless Sensor Networks for Real Time Data Transmission
Raut, A. R., Khandait, S. P., & Theng, D. P. (2024) · International Conference on Computer, Communication, Control and Information Technology · doi:10.1109/c3it60531.2024.10829489
Wireless Sensors Network Design for Aerospace Telemetry Data Collection
Silino, F., Alberti, M., Tatangeli, M., Brega, F., Albano, M., Cavallini, E., & Savazzi, P. (2025) · IEEE Journal of Radio Frequency Identification · doi:10.1109/jrfid.2025.3595615
“Existing works focusing on IEEE 802.15.4, such as those presented in [9] and [16], demonstrate its low power consumption and mature hardware ecosystem but consistently report limitations in throughput, which typically remains below 250 kbps, and in coverage, which is generally less than 100 m,…”
InfluentialHaenssler, O. C. (2025) · Springer eBooks · doi:10.1007/978-3-658-48078-3_5
Artificial hummingbird algorithm for cluster head selection in WSNs
Vij, M., & Sharma, G. (2025) · International Journal of Technology & Emerging Research · doi:10.64823/ijter.2503026
Enabling Continuous Low Latency Streaming in Industrial Roaming Scenarios
Tappe, D., Bendrick, A., & Ernst, R. (2025) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon58223.2025.11221885
“Industrial control systems frequently demand response times in the order of tens to hundreds of milliseconds [3], [4].”
Xu, J., Li, S.-N., Wen, Q., Xiao, L., Wang, W., & Ji, Y. (2025) · IEEE International Conference on Internet of Things (iThings) and IEEE Green Computing and Communications (GreenCom) and IEEE Cyber, Physical and Social Computing (CPSCom) and IEEE Smart Data (SmartData) · doi:10.1109/ithings-greencom-cpscom-smartdata-cybermatics67059.2025.00032
“The cluster adopts a star architecture, which is widely used in industrial time-critical and control-aware networks [5], [20].”
Khalil, A. (2020) · theses.fr (ABES) · doi:10.70675/70bc106azc376z4df2zacb6zcc6b9d96cf00
Reliable Communications for the Industrial Internet of Things
Kotsiou, V. (2020) · theses.fr (ABES) · doi:10.70675/adab833dz88b3z49e2z9947z598f554a4278 · Cited by 1
Environment-Aware Mobile Charging with Attenuation Effects
Ren, M., Liu, T., Wang, X., Li, Z., & Jin, A. (2026) · IEEE Conference on Computer Communications (INFOCOM) · doi:10.1109/infocom59046.2026.11571193
“Currently, ubiquitous wireless sensors are organized into autonomous networks widely applied in environmental monitoring, intelligent transportation, and industrial automation [1], [2].”
Implementation of Wireless Sensor Networks for Industrial Automation Applications
Xiao-Long, G. (2020) · ITSI Transactions on Electrical and Electronics Engineering · doi:10.65521/itsi-teee.v9i1.4212
Implementation of Wireless Sensor Networks for Industrial Monitoring Applications
Dahalbahadur, M. (2017) · ITSI Transactions on Electrical and Electronics Engineering · doi:10.65521/itsi-teee.v6i1.4246
Metadata
- Authors
- Wang, Q., & Jiang, J.
- Affiliations
- Western University (CA)
- ORCID
- Venue
- IEEE Communications Surveys & Tutorials
- Published
- 2016
- Volume
- 18
- Issue
- 3
- Pages
- 2197-2219
- ISSN
- 1553-877X (ISSN-L)
- 2373-745X
- OpenAlex
- W2328689326
- Cited by
- 182
- References
- 138
- Citations by year
- 2026: 2 · 2025: 8 · 2024: 17 · 2023: 17 · 2022: 21 · 2021: 23 · 2020: 25 · 2019: 26 · 2018: 27 · 2017: 15 · 2016: 1
- FWCI
- 19.35
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Communications Surveys & Tutorials (publishedVersion)
- Funders
- Natural Sciences and Engineering Research Council of Canada
- UNENE
- ISTP Canada
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Wireless Sensor Networks and IoT
- Physical Sciences › Computer Science › Computer Networks and Communications › Energy Efficient Wireless Sensor Networks
- Physical Sciences › Engineering › Control and Systems Engineering › Industrial Automation and Control Systems
- Keywords
- industrial wireless sensor networks, ZigBee, WirelessHART, ISA100.11a, WIA-PA, protocol architecture, protocol layers, industrial communication, standard comparison
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.