CoChat

Edge Computing in Industrial Internet of Things: Architecture, Advances and Challenges

Qiu, Tie, Chi, Jiancheng, Zhou, Xiaobo, Ning, Zhaolong, Atiquzzaman, Mohammed, Wu, Dapeng Oliver · 2020 · IEEE Communications Surveys & Tutorials

The DOI matches its Crossref record; 139 of the 139 references it cites were found in a registry or an index.

Abstract

The Industrial Internet of Things (IIoT) is a crucial research field spawned by the Internet of Things (IoT). IIoT links all types of industrial equipment through the network; establishes data acquisition, exchange, and analysis systems; and optimizes processes and services, so as to reduce cost and enhance productivity. The introduction of edge computing in IIoT can significantly reduce the decision-making latency, save bandwidth resources, and to some extent, protect privacy. This paper outlines the research progress concerning edge computing in IIoT. First, the concepts of IIoT and edge computing are discussed, and subsequently, the research progress of edge computing is discussed and summarized in detail. Next, the future architecture from the perspective of edge computing in IIoT is proposed, and its technical progress in routing, task scheduling, data storage and analytics, security, and standardization is analyzed. Furthermore, we discuss the opportunities and challenges of edge computing in IIoT in terms of 5G-based edge communication, load balancing and data offloading, edge intelligence, as well as data sharing security. Finally, we introduce some typical application scenarios of edge computing in IIoT, such as prognostics and health management (PHM), smart grids, manufacturing coordination, intelligent connected vehicles (ICV), and smart logistics.

Overview

Integrity signals

Registry

Crossref · 10.1109/comst.2020.3009103

Cites

139 of 139 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Research works printed but not linked: 12

  1. 2018, IEEE standard for adoption of OpenFog Reference Architecture for fog computing
  2. 2017, OpenFog Reference Architecture for Fog Computing
  3. 2016, Tactile Internet Application Scenarios Definitions and Terminology Architecture Functions and Technical Assumptions
  4. 2016, SmartM2M IoT Standards landscape and future evolutions
  5. 2019, The Edge Computing Advantage
  6. 2018, Introduction to Edge Computing in IIoT
  7. 2018, Signalling requirements and architecture of intelligent edge computing
  8. 2017, Key Safety Challenges for the IIoT
  9. 2019, IoT security maturity mod-el description and intended use
  10. 2017, The industrial Internet of Things volume g1 Reference architecture
  11. 2018, Industrial Networking Enabling IIoT Communication
  12. yoshikane, 2016, First demonstration of geographically unconstrained control of an industrial robot by jointly employing SDN-based optical transport networks and edge compute, Proc 21st OptoElectron Commun Conf (OECC) Held Jointly Int Conf Photon Switching (PS), 1

Cited by

See all 857

Metadata

Authors
Qiu, T., Chi, J., Zhou, X., Ning, Z., Atiquzzaman, M., & Wu, D. O.
Affiliations
  • Tianjin University (CN)
  • Dalian University of Technology (CN)
  • University of Oklahoma (US)
  • University of Florida (US)
Venue
IEEE Communications Surveys & Tutorials
Published
2020
Volume
22
Issue
4
Pages
2462-2488
ISSN
  • 1553-877X (ISSN-L)
  • 2373-745X
OpenAlex
W3043320740
Cited by
857
References
139
Citations by year
2026: 104 · 2025: 179 · 2024: 194 · 2023: 168 · 2022: 124 · 2021: 80 · 2020: 8
FWCI
44.65
Type
journal article
Language
en
Open access
closed
Locations
IEEE Communications Surveys & Tutorials (publishedVersion)
Funders
  • National Key Research and Development Program of China (2019YFB1703601)
  • National Natural Science Foundation of China (61672131, 61971084, 61702365)
Topics
  • Physical Sciences › Computer Science › Computer Networks and Communications › IoT and Edge/Fog Computing
  • Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Digital Transformation in Industry
  • Physical Sciences › Computer Science › Information Systems › Internet of Things and AI
Keywords
edge computing, Industrial Internet of Things, IIoT architecture, bandwidth reduction, privacy preservation, routing, task scheduling, security (computing), standardization, load balancing, data offloading, edge AI, data sharing security, prognostics and health management, smart grid, intelligent connected vehicles, smart logistics

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.