The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Design and optimization of medium frequency, medium voltage transformers
Abstract
Medium voltage, medium frequency transformers (MFTs) are much smaller in size and weight compared to conventional low frequency transformers. The MFTs are very attractive for applications where full control of the power flow and high power density are required, such as power electronic interface in smart grids and traction converter system. With reduced size, the optimal design of MFTs becomes more challenging due to the high isolation requirement and thermal stress. This paper presents a design and optimization methodology for MFTs with emphasis on thermal and insulation design. The improved thermal model for multi-layer windings consisting of litz-wire and the analytical calculation of maximum electric field in core window area are included in the optimization process. By using the methodology, the optimal designs of a 25kW/4 kHz MFT with two commonly used core materials are compared. The possibility of volume reduction by increasing the operating frequency is also investigated.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The primary design challenge for high-power MFTs is to balance the competing objectives including reliable electrical insulation, high efficiency, high power density, and superior thermal performance [2-7].”
From Design and Optimization of a 200-kW Medium-Frequency Transformer for Medium-Voltage SiC PV Inverters (2021) · cites this paper as [5]
Citations
Cites
A Charge Simulation Method for the Calculation of High Voltage Fields
Singer, H., Steinbigler, H., & Weiss, P. (1974) · IEEE Transactions on Power Apparatus and Systems · doi:10.1109/tpas.1974.293898 · Cited by 678 · cited 1×
“For safety reason, Emax is limited to 8.75 kV/mm, which is 25% of the dielectric strength of the epoxy resin[14].”
BackgroundInfluentialMedium frequency topology in railway applications
Steiner, M., & Reinold, H. (2007) · 2007 European Conference on Power Electronics and Applications · doi:10.1109/epe.2007.4417570 · Cited by 249 · cited 1×
“Previous research focusing on MFT design has been introduced in [1] [2] [3] for traction applications and in [4] [5] for renewable energy and smart grid applications.”
Optimized design of medium frequency transformers with high isolation requirements
Ortiz, G., Biela, J., & Kolar, J. W. (2010) · IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society · doi:10.1109/iecon.2010.5675240 · Cited by 159 · cited 1×
“In [7], different core materials are considered for design and temperature calculation is included in optimization process.”
BackgroundSelf-citationAn actively cooled high power, high frequency transformer with high insulation capability
Heinemann, L. (2003) · APEC. Seventeenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.02CH37335) · doi:10.1109/apec.2002.989270 · Cited by 135 · cited 1×
“Previous research focusing on MFT design has been introduced in [1] [2] [3] for traction applications and in [4] [5] for renewable energy and smart grid applications.”
Ortiz, G., Leibl, M., Kolar, J. W., & Apeldoorn, O. (2013) · 2013 IEEE 10th International Conference on Power Electronics and Drive Systems (PEDS) · doi:10.1109/peds.2013.6527217 · Cited by 126 · cited 1×
“Similar value of power density has been achieved in [20] for a MFT based on ferrite and operating at 20 kHz.”
MethodDu, Y., Baek, S., Bhattacharya, S., & Huang, A. Q. (2010) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2010.5674828 · Cited by 120 · cited 1×
“Previous research focusing on MFT design has been introduced in [1] [2] [3] for traction applications and in [4] [5] for renewable energy and smart grid applications.”
Multiphysical Characterization of Medium-Frequency Power Electronic Transformers
Villar, I. (2010) · Infoscience (Ecole Polytechnique Fédérale de Lausanne) · doi:10.5075/epfl-thesis-4622 · Cited by 92 · cited 3×
“Furthermore, the circular length of each winding layer and gap between layers are calculated separately instead of using a common mean length.”
BackgroundMethodInfluentialDesign considerations for medium-frequency power transformers in offshore wind farms
Meier, S., Kjellqvist, T., Norrga, S., & Nee, H. (2009) · European Conference on Power Electronics and Applications · Cited by 56
Design considerations for a medium frequency transformer in a line side power conversion system
Kjellqvist, T., Norrga, S., & Östlund, S. (2004) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.2004.1355834 · Cited by 52 · cited 1×
“Previous research focusing on MFT design has been introduced in [1] [2] [3] for traction applications and in [4] [5] for renewable energy and smart grid applications.”
Analytical model for the thermal resistance of windings consisting of solid or litz wire
Jaritz, M., & Biela, J. (2013) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2013.6634624 · Cited by 40 · cited 2×
“This is done by using 100× 4 simulation charges and calculating the E-field value of 4 contour points for each selected conductor.”
BackgroundMethodInfluentialSelf-citation
Research works printed but not linked: 2
- koch, 1968, Berechnung der kapazit?at von spulen, insbesondere in schalenkernen, Volvo Berichte, 14, 99
- wallmeier, 2001, Automatisierte Optimierung von Induktiven Bauelementen Fr Stromrichteranwendungen
Cited by
Kumar, D., Zare, F., & Ghosh, A. (2017) · IEEE Access · doi:10.1109/access.2017.2705914 · Cited by 751
“The DC-DC converter can operate at higher frequency range (few 100 Hz to kHz), and thus a considerable reduction in reactive component size can also be achieved [35], [36].”
BackgroundHigh-Frequency Transformer Design for Modular Power Conversion From Medium-Voltage AC to 400 VDC
Zhao, S., Li, Q., Lee, F. C., & Li, B. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2774440 · Cited by 231
“Shuai and Biela proposed a time saving method to quickly figure out maximum electrical field which is helpful but some aspects are not included [18].”
BackgroundMethodPower Electronic Transformer-Based Railway Traction Systems: Challenges and Opportunities
Feng, J., Chu, W. Q., Zhang, Z., & Zhu, Z. Q. (2017) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2017.2685464 · Cited by 229
Power electronic technologies for flexible DC distribution grids
Doncker, R. W. D. (2014) · International Power Electronics Conference (IPEC) · doi:10.1109/ipec.2014.6869670 · Cited by 158
Design and Optimization of a 200-kW Medium-Frequency Transformer for Medium-Voltage SiC PV Inverters
Guo, Z., Yu, R., Xu, W., Feng, X., & Huang, A. Q. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3059879 · Cited by 115
Analytical Design Methodology for Litz-Wired High-Frequency Power Transformers
Barrios, E. L., Ursúa, A., Marroyo, L., & Sanchis, P. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2351786 · Cited by 102
“Finally, the fourth approach, named Litz-wire 4, establishes a much more strict relation of δ/15 < r0 < δ/30 [8], [9], [42].”
MethodAssadi, S. A., Matsumoto, H., Moshirvaziri, M., Nasr, M., Zaman, M. S., & Trescases, O. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2939301 · Cited by 93
“In [8], a safety-margin of 20% with respect to Bsat is incorporated by using a large core and air gaps.”
BackgroundCharacterization of the voltage and electric field stresses in multi-cell solid-state transformers
Guillod, T., Huber, J., Ortiz, G., De, A., Franck, C. M., & Kolar, J. W. (2014) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2014.6954048 · Cited by 72
“However, so far only limited research has been dedicated to the insulation of an SST [16] or of MF transformers [17]– [19].”
BackgroundPower electronic transformers: A review
Battal, F., Balcı, S., & Sefa, İ. (2020) · Measurement · doi:10.1016/j.measurement.2020.108848 · Cited by 79
Peng, S., & Biela, J. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2636572 · Cited by 60
“However, for highpower applications, the operating frequency is usually in the range of a few kHz mainly due to the switching losses and the limited volume reduction at high frequencies because of the required isolation distance [2].”
BackgroundSelf-citationYi, Z., Sun, K., Liu, H., Cao, G., & Lu, S. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2021.3094674 · Cited by 57
Cremasco, A., Rothmund, D., Curti, M., & Lomonova, E. A. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2021.3064702 · Cited by 55
Medium-Frequency Transformer Scaling Laws: Derivation, Verif ication, and Critical Analysis
Guillod, T. (2020) · CPSS Transactions on Power Electronics and Applications · doi:10.24295/cpsstpea.2020.00003 · Cited by 48
Design of Inductors With Significant AC Flux
Zhang, Z., Ngo, K. D. T., & Nilles, J. L. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2525729 · Cited by 31
“Amoiralis et al. [41] and Shuai and Biela [42] introduced iterative methods to derive the optimal transformer in terms of the loss, size, and thermal constraints.”
MethodInfluentialModelling and Design of a Medium Frequency Transformer for High Power DC-DC Converters
Stojadinović, M., & Biela, J. (2018) · International Power Electronics Conference (IPEC) · doi:10.23919/ipec.2018.8507864 · Cited by 26
Self-citationInvestigation of acoustic noise sources in medium frequency, medium voltage transformers
Shuai, P., & Biela, J. (2014) · 2014 16th European Conference on Power Electronics and Applications · doi:10.1109/epe.2014.6910949 · Cited by 25
“In this work, the measurement is mainly performed on a pair of cut and uncut standard nanocrystalline cores (VITROPERM500F T60102-L2157-W159), which is selected for the MFT prototype design in [1].”
MethodSelf-citationHein, K., Murali, R., Xu, Y. H., Venkataraman, A., & Gupta, A. K. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.103970 · Cited by 19
Das, A. K., Wei, Z., Fernandes, B. G., Tian, H., Thevar, M. P., Cao, S., Vaisambhayana, S., Tripathi, A., & Kjar, P. C. (2018) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2018.8341259 · Cited by 18
“core, conductor, insulation, coolant, which altogether exhibit a heterogeneous thermal behavior, dictated by surface area, material properties and exposure to coolant [9]–[11], [21].”
BackgroundResultBecerra, G., Castillo-Atoche, A., Castillo, J. V., Datta, A., Cetina, R. Q., Alzola, R. P., Carrasco-Alvarez, R., & Osorio‐de‐la‐Rosa, E. (2020) · IEEE Access · doi:10.1109/access.2020.3033718 · Cited by 17
“It can operate at frequencies of kHz, and thus, a considerable reduction in component size is achieved [40], [41].”
BackgroundModeling and Design of a Medium-Frequency Transformer for High-Power DC-DC Converters
Stojadinović, M., & Biela, J. (2019) · IEEJ Journal of Industry Applications · doi:10.1541/ieejjia.8.685 · Cited by 15
Self-citationAhmed, D., & Wang, L. (2020) · IEEE Access · doi:10.1109/access.2020.2965653 · Cited by 15
“Therefore, the converter designers go through time & resource consuming, cumbersome, and complicated multi-objective optimization techniques that require a large number of iterations [2], [7]–[9], [13]–[21].”
BackgroundPeng, S., & Biela, J. (2015) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2015.7309376 · Cited by 14
“In a recent publication [8], vibration and acoustic noise measurements have been performed on several magnetic cores composed of various materials and with different geometric shapes.”
BackgroundSelf-citationA Medium Frequency Transformer Design Tool with Methodologies Adapted to Various Structures
Fouineau, A., Guillet, M., Lefebvre, B., Raulet, M., & Sixdenier, F. (2020) · International Conference on Ecological Vehicles and Renewable Energies (EVER) · doi:10.1109/ever48776.2020.9243104 · Cited by 14
“Because of this complexity, a lot of work has been done to develop MFT design methodologies [6-11].”
Möller, R., Soppe, B., & Schnettler, A. (2017) · IEEE International Conference on DC Microgrids · doi:10.1109/icdcm.2017.8001038 · Cited by 12
“Due to increasing frequency dependent losses in the core, the windings and the insulation, a high thermal capability of the insulation might be necessary [4].”
BackgroundEffect of Air Gap on Electrical Tree in Epoxy Resin Under High Frequency Bipolar Square-Wave Voltage
Wang, S., Zhang, C., Fu, H., Xiang, J., Li, J., Li, S., Ouyang, B., & Liu, J. (2020) · Materials · doi:10.3390/ma13245722 · Cited by 12
“Epoxy casting insulation is the primary insulation of the winding structure in solid-state transformers, and it is subjected to the high frequency bipolar square-wave voltage (1 kHz to 100 kHz) and high temperature (about 100 ◦C) [3,4].”
BackgroundJafari, M., Malekjamshidi, Z., & Islam, M. R. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.3031731 · Cited by 11
Conceptualization and Multi-Objective Analysis of Multi-Cell Solid-State Transformers
Huber, J. (2016) · Repository for Publications and Research Data (ETH Zurich) · doi:10.3929/ethz-b-000164724 · Cited by 17
Design of a Medium Voltage Generator with DC-Cascade for High Power Wind Energy Conversion Systems
Steffen, J., Lengsfeld, S., Jung, M., Ponick, B., Gracia, M. H., Spagnolo, A., Klöpzig, M., Schleicher, K., & Schäfer, K. (2021) · Energies · doi:10.3390/en14113106 · Cited by 9
2.5kV, 200kW bi-directional isolated DC/DC converter for medium-voltage applications
Matsuoka, Y., Wãda, K., Nakahara, M., Takao, K., Sung, K., Ohashi, H., & Nishizawa, S. (2014) · International Power Electronics Conference (IPEC) · doi:10.1109/ipec.2014.6869671 · Cited by 9
“[4] and [5] have presented core loss and winding structures of the medium-frequency transformers.”
BackgroundYi, Z., Sun, K., Lu, S., Cao, G., Li, Y., & Ha, J.-I. (2020) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce44975.2020.9235992 · Cited by 8
“When there is no condition to ground the core or connect the core and the winding, not only the insulation distance between the primary and the secondary winding dins, but that between the core and the primary windings dcp and that between the core and the windings at the top and the bottom dcw should also be determin…”
BackgroundParallel Frameworks for Robust Optimization of Medium-Frequency Transformers
Booth, K., Subramanyan, H., Líu, J., & Lukic, S. M. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.3042527 · Cited by 7
Li, Y., Yang, Z., & Guo, P. F. (2024) · Journal of Electrical Engineering and Technology · doi:10.1007/s42835-024-01948-y · Cited by 5
“Some studies have shown the influence of core structure on the vibration of medium-high frequency transformers [14–18 ].”
Enhancing Power Flow control in MT-HVDC system with Novel SST-based IDCPFC topology
Khan, M. Q., Khan, M. M., Nawaz, A., Wang, H. F., & Wang, C. (2024) · Electric Power Systems Research · doi:10.1016/j.epsr.2024.110602 · Cited by 5
Mission-profile based reliability framework for medium-frequency transformers
Meligy, A., Coelho-Medeiros, R., Colak, I., & Bacha, S. (2025) · Power Electronic Devices and Components · doi:10.1016/j.pedc.2025.100114 · Cited by 4
A Numerical Determination of Power Distribution in the Resistance Welding Machine Output Circuit
Stępień, M. A., Grzesik, B., & Mikno, Z. (2018) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/epepemc.2018.8521972 · Cited by 4
“Importance of this part increases at higer frequency and reduced power losses in a transformer [3].”
BackgroundKorthauer, B., & Biela, J. (2026) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2026.3666069 · Cited by 2
“To overcome this limitation, some approaches integrate electric field computations directly into the design optimization routine [18], [19], for example, using the charge simulation method [20].”
Self-citationMedium voltage (MV) modular multilevel converters
Adamowicz, M., & Krzemiński, Z. (2014) · AUTOMATYKA ELEKTRYKA ZAKLOCENIA · doi:10.17274/aez.2014.17.04 · Cited by 2
Design of medium-frequency transformers with silicon steel for mobile power substations
Deng, C., Islam, T., & Balda, J. C. (2017) · IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG) · doi:10.1109/pedg.2017.7972448 · Cited by 2
Study of Magnetic Core Geometries for Coupling Systems Through a Magnetic Bus
Brighenti, L. L., Martins, D. C., & Santos, W. M. D. (2019) · IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG) · doi:10.1109/pedg.2019.8807719 · Cited by 3
“Designing the magnetic bus with the required inductance is interesting when the objective is to increase the power density and some techniques used are: vertical displacement of concentric windings [29], [30]; horizontal displacement of windings [31], [32] and insertion of a magnetic core between the windings [31], [3…”
MethodOptimal design of minimal footprint high frequency transformer
Jeyapradha, R. B., & Veeraraghavalu, R. (2021) · Serbian Journal of Electrical Engineering · doi:10.2298/sjee2103303b · Cited by 2
Development of Multi-Domain Design Tool for Medium Voltage High Frequency Power Transformers
Liu, T., Li, C., Lu, R., & Li, W. (2022) · IEEE International Electrical and Energy Conference (CIEEC) · doi:10.1109/cieec54735.2022.9845975 · Cited by 1
Bolzonella, L., Mirzadarani, R., & Niasar, M. G. (2025) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon58223.2025.11221021 · Cited by 1
“Amorphous materials instead allow for operations up to 50 kHz, at the expense of lower saturation inductance [9].”
A comparison of highly coupled step-down transformers dedicated for resistance welding systems
Stępień, M. A., Grzesik, B., & Mikno, Z. (2017) · International Conference on Electromagnetic Devices and Processes in Environment Protection with Seminar Applications of Superconductors (ELMECO & AoS) · doi:10.1109/elmeco.2017.8267728 · Cited by 1
“One of the simplest ways enabling the reduction of weight without compromising supplied power (increasing power density) involves an increase in the frequency of operation [2].”
BackgroundELECTRIC STRESS AND INSULATION FAILURE MECHANISM OF MEDIUM VOLTAGE MEDIUM FREQUENCY TRANSFORMER
Zheng, C. (2023) · VBN Forskningsportal (Aalborg Universitet) · doi:10.54337/aau561784653 · Cited by 1
Fouineau, A. (2019) · theses.fr (ABES) · doi:10.70675/9c9cfcdez524fz4b1ezb2acz97f0aacb4e39 · Cited by 2
Modelling of magnetic devices for high frequency power converters
Arruti, A. (2024) · eRepository Mondragon University (Mondragon University) · doi:10.48764/0h70-6y86 · Cited by 3
Metadata
- Authors
- Shuai, P., & Biela, J.
- Affiliations
- ETH Zurich (CH)
- ORCID
- Biela, Jurgen
- Venue
- 2013 15th European Conference on Power Electronics and Applications (EPE)
- Publisher
- IEEE
- Published
- 2013-09
- Pages
- 1-10
- OpenAlex
- W2071652746
- Cited by
- 43
- References
- 10
- Citations by year
- 2025: 2 · 2024: 2 · 2023: 1 · 2022: 2 · 2021: 5 · 2020: 9 · 2019: 4 · 2018: 3 · 2017: 6 · 2016: 2 · 2015: 1 · 2014: 6
- FWCI
- 3.65
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- European Conference on Power Electronics and Applications (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Magnetic Properties and Applications
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Induction Heating and Inverter Technology
- Keywords
- medium frequency transformer, medium-voltage transformers, transformer design optimization, thermal modeling, insulation design, Litz wire, multi-layer winding, maximum electric field, core materials, volume reduction, traction converter, power electronic interfaces, smart grid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.