CoChat

The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.

Design and optimization of medium frequency, medium voltage transformers

Shuai, Peng, Biela, Jurgen · 2013 · 2013 15th European Conference on Power Electronics and Applications (EPE)

Abstract

Medium voltage, medium frequency transformers (MFTs) are much smaller in size and weight compared to conventional low frequency transformers. The MFTs are very attractive for applications where full control of the power flow and high power density are required, such as power electronic interface in smart grids and traction converter system. With reduced size, the optimal design of MFTs becomes more challenging due to the high isolation requirement and thermal stress. This paper presents a design and optimization methodology for MFTs with emphasis on thermal and insulation design. The improved thermal model for multi-layer windings consisting of litz-wire and the analytical calculation of maximum electric field in core window area are included in the optimization process. By using the methodology, the optimal designs of a 25kW/4 kHz MFT with two commonly used core materials are compared. The possibility of volume reduction by increasing the operating frequency is also investigated.

Overview

Integrity signals

Registry

Crossref · 10.1109/epe.2013.6634423

Cites

10 of 10 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Research works printed but not linked: 2

  1. koch, 1968, Berechnung der kapazit?at von spulen, insbesondere in schalenkernen, Volvo Berichte, 14, 99
  2. wallmeier, 2001, Automatisierte Optimierung von Induktiven Bauelementen Fr Stromrichteranwendungen

Cited by

See all 46

Metadata

Authors
Shuai, P., & Biela, J.
Affiliations
ETH Zurich (CH)
Venue
2013 15th European Conference on Power Electronics and Applications (EPE)
Publisher
IEEE
Published
2013-09
Pages
1-10
OpenAlex
W2071652746
Cited by
43
References
10
Citations by year
2025: 2 · 2024: 2 · 2023: 1 · 2022: 2 · 2021: 5 · 2020: 9 · 2019: 4 · 2018: 3 · 2017: 6 · 2016: 2 · 2015: 1 · 2014: 6
FWCI
3.65
Type
conference paper
Language
en
Open access
closed
Locations
European Conference on Power Electronics and Applications (publishedVersion)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
  • Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Magnetic Properties and Applications
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Induction Heating and Inverter Technology
Keywords
medium frequency transformer, medium-voltage transformers, transformer design optimization, thermal modeling, insulation design, Litz wire, multi-layer winding, maximum electric field, core materials, volume reduction, traction converter, power electronic interfaces, smart grid

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.