The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
A novel architecture of the 3D stacked MRAM L2 cache for CMPs
Abstract
Magnetic random access memory (MRAM) is a promising memory technology, which has fast read access, high density, and non-volatility. Using 3D heterogeneous integrations, it becomes feasible and cost-efficient to stack MRAM atop conventional chip multiprocessors (CMPs). However, one disadvantage of MRAM is its long write latency and its high write energy. In this paper, we first stack MRAM-based L2 caches directly atop CMPs and compare it against SRAM counterparts in terms of performance and energy. We observe that the direct MRAM stacking might harm the chip performance due to the aforementioned long write latency and high write energy. To solve this problem, we then propose two architectural techniques: read-preemptive write buffer and SRAM-MRAM hybrid L2 cache. The simulation result shows that our optimized MRAM L2 cache improves performance by 4.91% and reduces power by 73.5%compared to the conventional SRAM L2 cache with the similar area.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Introduction to the Cell multiprocessor
Kahle, J. A., Day, M. N., Hofstee, H. P., Johns, C. R., Maeurer, T. R., & Shippy, D. (2005) · IBM Journal of Research and Development · doi:10.1147/rd.494.0589 · Cited by 934
Demystifying 3D ICs: The Pros and Cons of Going Vertical
Davis, W. R., Wilson, J., Mick, S., Xu, J., Hua, H., Mineo, C., Sule, A. M., Steer, M., & Franzon, P. D. (2005) · IEEE Design and Test of Computers · doi:10.1109/mdt.2005.136 · Cited by 836
A novel nonvolatile memory with spin torque transfer magnetization switching: spin-ram
Hosomi, M., Yamagishi, H., Yamamoto, T., Bessho, K., Higo, Y., Yamane, K., Yamada, H., Shoji, M., Hachino, H., Fukumoto, C., et al. (2006) · IEEE InternationalElectron Devices Meeting, 2005. IEDM Technical Digest. · doi:10.1109/iedm.2005.1609379 · Cited by 790
Die Stacking (3D) Microarchitecture
Black, B., Pantuso, D., Reed, P., Rupley, J., Shankar, S., Shen, J., Webb, C., Annavaram, M., Brekelbaum, N., DeVale, J., et al. (2006) · 2006 39th Annual IEEE/ACM International Symposium on Microarchitecture (MICRO'06) · doi:10.1109/micro.2006.18 · Cited by 603
3D-Stacked Memory Architectures for Multi-core Processors
Loh, G. H. (2008) · ACM SIGARCH Computer Architecture News · doi:10.1145/1394608.1382159 · Cited by 541
Diao, Z., Li, Z., Wang, S., Ding, Y., Panchula, A., Chen, E., Wang, L.-C., & Huai, Y. (2007) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/19/16/165209 · Cited by 467
Bridging the Processor-Memory Performance Gapwith 3D IC Technology
Liu, C. C., Ganusov, I., Burtscher, M., & Tiwari, S. (2005) · IEEE Design and Test of Computers · doi:10.1109/mdt.2005.134 · Cited by 280
A Practical Approach to Exploiting Coarse-Grained Pipeline Parallelism in C Programs
Thies, W., Chandrasekhar, V., & Amarasinghe, S. (2007) · 40th Annual IEEE/ACM International Symposium on Microarchitecture (MICRO 2007) · doi:10.1109/micro.2007.38 · Cited by 274
Ghosh, M., & Lee, H.-H. S. (2007) · IEEE/ACM International Symposium on Microarchitecture (MICRO) · doi:10.1109/micro.2007.13 · Cited by 204
Three-dimensional cache design exploration using 3DCacti
Tsai, Y.-F., Xie, Y., Vijaykrishnan, N., & Irwin, M. J. (2006) · Proceedings, IEEE International Conference on Computer Design/Proceedings - IEEE International Conference on Computer Design · doi:10.1109/iccd.2005.108 · Cited by 108
Self-citation
Cited by
Relaxing non-volatility for fast and energy-efficient STT-RAM caches
Smullen, C. W., Mohan, V., Nigam, A., Gurumurthi, S., & Stan, M. R. (2011) · 2011 IEEE 17th International Symposium on High Performance Computer Architecture · doi:10.1109/hpca.2011.5749716 · Cited by 390
Overcoming the challenges of crossbar resistive memory architectures
Xu, C., Niu, D., Muralimanohar, N., Balasubramonian, R., Zhang, T., Yu, S., & Xie, Y. (2015) · 2015 IEEE 21st International Symposium on High Performance Computer Architecture (HPCA) · doi:10.1109/hpca.2015.7056056 · Cited by 340
Self-citationEnergy reduction for STT-RAM using early write termination
Zhou, P., Zhao, B., Yang, J., & Zhang, Y. (2009) · Proceedings of the 2009 International Conference on Computer-Aided Design · doi:10.1145/1687399.1687448 · Cited by 338
Hybrid cache architecture with disparate memory technologies
Wu, X., Li, J., Zhang, L., Speight, E., Rajamony, R., & Xie, Y. (2009) · Proceedings of the 36th annual international symposium on Computer architecture · doi:10.1145/1555754.1555761 · Cited by 333
Self-citation
Metadata
- Authors
- Sun, G., Dong, X., Xie, Y., Li, J., & Chen, Y.
- Venue
- 2009 IEEE 15th International Symposium on High Performance Computer Architecture
- Publisher
- IEEE
- Published
- 2009-02
- Pages
- 239-249
- ISSN
- 1530-0897 (ISSN-L)
- OpenAlex
- W2084007230
- Cited by
- 439
- References
- 11
- FWCI
- 21.06
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.