COMpliant huMANoid COMAN: Optimal joint stiffness tuning for modal frequency control
Open accessThe DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Abstract
The incorporation of passive compliance in robotic systems could improve their performance during interactions and impacts, for energy storage and efficiency, and for general safety for both the robots and humans. This paper presents the recently developed COMpliant huMANoid COMAN. COMAN is actuated by passive compliance actuators based on the series elastic actuation principle (SEA). The design and implementation of the overall body of the robot is discussed including the realization of the different body segments and the tuning of the joint distributed passive elasticity. This joint stiffness tuning is a critical parameter in the performance of compliant systems. A novel systematic method to optimally tune the joint elasticity of multi-dof SEA robots based on resonance analysis and energy storage maximization criteria forms one of the key contributions of this work. The paper will show this method being applied to the selection of the passive elasticity of COMAN legs. The first completed robot prototype is presented accompanied by experimental walking trials to demonstrate its operation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pratt, G. A., & Williamson, M. M. (2002) · Proceedings 1995 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human Robot Interaction and Cooperative Robots · doi:10.1109/iros.1995.525827 · Cited by 2,206 · cited 1×
“The beneficial effects of the intrinsic elasticity on specific performance aspects of the robotic systems have been also highlighted and studied in robots [15], [16], [17], [18], [19] by employing actuators with preset or variable level of compliance.”
BackgroundThe development of Honda humanoid robot
Hirai, K., Hirose, M., Haikawa, Y., & Takenaka, T. (2002) · Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146) · doi:10.1109/robot.1998.677288 · Cited by 1,922 · cited 1×
“Hence, ASIMO, which is one of the best performing powered humanoids, was developed from E0 (1986), E1-E2E3 (1987-1991), E4-E5-E6 (1991-1993), P1-P2-P3 (19931997), through to the original ASIMO (2000) and the new ASIMO (2005) [1], [2].”
BackgroundMuscular Force in Running Turkeys: The Economy of Minimizing Work
Roberts, T. J., Marsh, R. L., Weyand, P. G., & Taylor, C. R. (1997) · Science · doi:10.1126/science.275.5303.1113 · Cited by 651
Muscle-tendon interaction and elastic energy usage in human walking
Ishikawa, M., Komi, P. V., Grey, M. J., Lepola, V., & Bruggemann, G.-P. (2005) · Journal of Applied Physiology · doi:10.1152/japplphysiol.00189.2005 · Cited by 497
Honda humanoid robots development
Hirose, M., & Ogawa, K. (2007) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2006.1917 · Cited by 372 · cited 1×
“The P3 prototype unveiled in 1998 [3] was one of the breakthrough designs, initiating and spurring research on a number of other key platforms.”
BackgroundDevelopment of a new humanoid robot WABIAN-2
Ogura, Y., Aikawa, H., Shimomura, K., Kondo, H., Morishima, A., Lim, H.-O., & Takanishi, A. (2006) · Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006. · doi:10.1109/robot.2006.1641164 · Cited by 367 · cited 1×
“Similarly KAIST built KHR-1/2/3 (Hubo) [6] and Waseda continued its long and successful tradition to build many different models through to Wabian-2R [7].”
BackgroundPratt, J., Koolen, T., de Boer, T., Rebula, J., Cotton, S., Carff, J., Johnson, M., & Neuhaus, P. (2012) · The International Journal of Robotics Research · doi:10.1177/0278364912452762 · Cited by 263 · cited 1×
“Despite the numerous compliant robots developed in the past, [17], [10], [22] the tuning of the stiffness of the SEA joints still remains a trial and error process and very little information on the criteria and methodologies used is available for most of these compliant robots.”
BackgroundDevelopment of Humanoid Robot ASIMO
Hirose, M. (2001) · IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) · Cited by 189
Lower body realization of the baby humanoid - ‘iCub’
Tsagarakis, N. G., Becchi, F., Righetti, L., Ijspeert, A. J., & Caldwell, D. G. (2007) · IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) · doi:10.1109/iros.2007.4399096 · Cited by 26 · cited 1×
“humanoid arena aiming at producing a ”child-like” humanoid platform for understanding and development of cognitive systems [8], [9], [10], but other successful humanoid/bipedal implementations within Europe include the humanoid LOLA which is an enhancement over the Johnnie robot [11].”
BackgroundSelf-citationTHE ELECTRIC CABLE DIFFERENTIAL LEG: A NOVEL DESIGN APPROACH FOR WALKING AND RUNNING
HURST, J. W. (2011) · International Journal of Humanoid Robotics · doi:10.1142/s0219843611002459 · Cited by 22 · cited 2×
“Despite the numerous compliant robots developed in the past, [17], [10], [22] the tuning of the stiffness of the SEA joints still remains a trial and error process and very little information on the criteria and methodologies used is available for most of these compliant robots.”
Background
Cited by
Learning agile and dynamic motor skills for legged robots
Hwangbo, J., Lee, J., Dosovitskiy, A., Bellicoso, D., Tsounis, V., Koltun, V., & Hutter, M. (2019) · Science Robotics · doi:10.1126/scirobotics.aau5872 · Cited by 1,482
“Most legged systems are driven by hydraulic actuators [51] or electric motors with gears [3], and some even include dedicated mechanical compliance [5, 52].”
BackgroundBiorobotics: Using robots to emulate and investigate agile locomotion
Ijspeert, A. J. (2014) · Science · doi:10.1126/science.1254486 · Cited by 491
Overview of the torque-controlled humanoid robot TORO
Englsberger, J., Werner, A., Ott, C., Henze, B., Roa, M. A., Garofalo, G., Burger, R., Beyer, A., Eiberger, O., Schmid, K., et al. (2014) · 2014 IEEE-RAS International Conference on Humanoid Robots · doi:10.1109/humanoids.2014.7041473 · Cited by 297
Advancements in Humanoid Robots: A Comprehensive Review and Future Prospects
Tong, Y., Liu, H., & Zhang, Z. (2024) · IEEE/CAA Journal of Automatica Sinica · doi:10.1109/jas.2023.124140 · Cited by 288
WALK‐MAN: A High‐Performance Humanoid Platform for Realistic Environments
Tsagarakis, N. G., Caldwell, D. G., Negrello, F., Choi, W., Baccelliere, L., Loc, V. G., Noorden, J., Muratore, L., Margan, A., Cardellino, A., et al. (2017) · Journal of Field Robotics · doi:10.1002/rob.21702 · Cited by 272
Self-citationPhysical Human–Robot Interaction
Haddadin, S., & Croft, E. (2016) · Springer Handbooks · doi:10.1007/978-3-319-32552-1_69 · Cited by 263
Model-Free Robust Adaptive Control of Humanoid Robots With Flexible Joints
Jin, M., Lee, J., & Tsagarakis, N. G. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2588461 · Cited by 219
Self-citationGeneralized Task-Parameterized Skill Learning
Huang, Y., Silvério, J., Rozo, L., & Caldwell, D. G. (2018) · 2018 IEEE International Conference on Robotics and Automation (ICRA) · doi:10.1109/icra.2018.8461079 · Cited by 49
“In this section, we evaluate our proposed methods using several examples on the simulated/real COMAN robot [16]: (i) we consider the confidence-weighted scheme with different sets of frame confidences (Section VI-A) in the simulated robot; (ii) we apply the task frame optimization to a simulated task of reaching a pol…”
MethodSelf-citation
Metadata
- Authors
- Tsagarakis, N. G., Morfey, S., Medrano Cerda, G., Zhibin, L., & Caldwell, D. G.
- Venue
- 2013 IEEE International Conference on Robotics and Automation
- Publisher
- IEEE
- Published
- 2013-05
- Pages
- 673-678
- ISSN
- 1050-4729 (ISSN-L)
- OpenAlex
- W2122827816
- Cited by
- 228
- References
- 10
- FWCI
- 55.43
- Type
- conference paper
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.