Multi-objective optimization and comparative evaluation of Si soft-switched and SiC hard-switched automotive DC-DC converters
The DOI matches its Crossref record; 15 of the 16 references it cites were found in a registry or an index.
Abstract
The application of soft-switching concepts or silicon carbide (SiC) devices are two enabling technologies to further push the efficiency, power density or specific weight of power electronics converters. For an automotive application, such as a DC-DC converter that interconnects the high voltage battery or ultra-capacitor in a hybrid electrical vehicle (HEV) or a fuel cell vehicle (FCV) to the DC-link, costs and failure rate are likewise of importance. Due to increasing requirements on multiple of these converter characteristics the comprehensive multi-objective optimization of the entire converter system gains importance. Thereto, this paper proposes an optimization method to explore the limits of power density as a function of the switching frequency and the number of phases of non-isolated bi-directional multi-phase DC-DC converters operated with soft-switching and silicon devices and hard-switched converters that take advantage of SiC devices. In addition, the optimization includes an algorithm to determine the chip size required for the semiconductor devices under consideration of the thermal characteristics and efficiency requirements. Based on detailed analytical volume, loss and cost models of the converter components as well as on measurements demonstrative results on the optimum converter designs are provided and evaluated comparatively for the different converter concepts.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The benefits of SiC can also be exploited by including SiC diodes into conventional converters. By leveraging their smaller size, fast reverse recovery, and high temperature tolerance, a hybrid design can be successfully implemented [21].”
From Review and Outlook on GaN and SiC Power Devices: Industrial State-of-the-Art, Applications, and Perspectives (2024) · cites this paper as [21]
Citations
Cites
Power electronics converters, applications and design
Robinson, F. V. P. (1997) · Microelectronics Journal · doi:10.1016/s0026-2692(97)87859-7 · Cited by 5,075
Power Electronics: Converters, Applications and Design
Mohan, N., Undeland, T. M., & Robbins, W. P. (1989) · Cited by 4,771
Rashid, R. (1988) · Cited by 2,662
Venkatachalam, K., Sullivan, C. R., Abdallah, T., & Tacca, H. (2003) · 2002 IEEE Workshop on Computers in Power Electronics, 2002. Proceedings. · doi:10.1109/cipe.2002.1196712 · Cited by 1,145 · cited 1×
“is a constant depending on the Steinmetz Parameters k, α, β of the magnetic material [9].”
BackgroundPower Electronics: Converters, Applications, and Design
Mohan (2007) · Cited by 1,017
Emadi, A., Williamson, S. S., & Khaligh, A. (2006) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.872378 · Cited by 714
Automotive DC-DC bidirectional converter made with many interleaved buck stages
Garcia, O., Zumel, P., de Castro, A., & Cobos, A. (2006) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.872379 · Cited by 405 · cited 1×
“Additionally, with a multi-phase converter design, the ripple quantities and thus also the total volume claimed by the passive components is reduced [3][5] and for a low power P the efficiency is improved by partial operation of Non out of N converter phases that are connected in parallel [6][4].”
BackgroundA Novel Low-Loss Modulation Strategy for High-Power Bidirectional Buck ${\bm +}$ Boost Converters
Waffler, S., & Kolar, J. W. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2015881 · Cited by 276
Self-citationComparing DC-DC converters for power management in hybrid electric vehicles
Schupbach, R. M., & Balda, J. C. (2003) · IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03. · doi:10.1109/iemdc.2003.1210630 · Cited by 244 · cited 1×
“One commonly used converter topology for this application is the hard-switched, cascaded, buck+boost converter [2] shown in Fig.”
MethodAnalytical computation of AC resistance of round and rectangular litz wire windings
Ferreira, J. A. (1992) · IEE Proceedings B Electric Power Applications · doi:10.1049/ip-b.1992.0003 · Cited by 207
Cited by
Biela, J., Schweizer, M., Waffler, S., & Kolar, J. W. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2072896 · Cited by 892
Self-citationBuffolo, M., Favero, D., Marcuzzi, A., De Santi, C., Meneghesso, G., Zanoni, E., & Meneghini, M. (2024) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2023.3346369 · Cited by 476
Silicon Carbide Power Transistors: A New Era in Power Electronics Is Initiated
Rabkowski, J., Peftitsis, D., & Nee, H. (2012) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2012.2193291 · Cited by 422
Hossain, M. Z., Rahim, N. A., & Selvaraj, J. A. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.07.017 · Cited by 305
Sahan, B., Araujo, S., Nöding, C., & Zacharias, P. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2096827 · Cited by 179
Metadata
- Authors
- Waffler, S., Preindl, M., & Kolar, J. W.
- Affiliations
- ETH Zurich (CH)
- Venue
- 2009 35th Annual Conference of IEEE Industrial Electronics
- Publisher
- IEEE
- Published
- 2009-11
- Pages
- 3814-3821
- ISSN
- 1553-572X (ISSN-L)
- OpenAlex
- W2534287116
- Cited by
- 43
- References
- 16
- Citations by year
- 2025: 1 · 2024: 1 · 2023: 4 · 2022: 3 · 2021: 2 · 2020: 1 · 2019: 2 · 2018: 2 · 2017: 7 · 2016: 4 · 2015: 2 · 2014: 1 · 2013: 4 · 2012: 4
- FWCI
- 4.31
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- Annual Conference of the IEEE Industrial Electronics Society (IECON) (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Keywords
- soft switching, silicon carbide, hard switching, multi-objective optimization, power density, hybrid electric vehicles, fuel cell vehicles, switching frequency, chip size, thermal properties, converter efficiency, cost modeling, loss modeling
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Multi-objective optimization and comparative evaluation of Si soft-switched and SiC hard-switched automotive DC-DC converters. https://app.cochat.ai/papers/10.1109/iecon.2009.5415123
- The paper
- Waffler, S., Preindl, M., & Kolar, J. W. (2009). Multi-objective optimization and comparative evaluation of Si soft-switched and SiC hard-switched automotive DC-DC converters. 2009 35th Annual Conference of IEEE Industrial Electronics. https://doi.org/10.1109/iecon.2009.5415123
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.