A 45nm Logic Technology with High-k+Metal Gate Transistors, Strained Silicon, 9 Cu Interconnect Layers, 193nm Dry Patterning, and 100% Pb-free Packaging
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
A 45 nm logic technology is described that for the first time incorporates high-k + metal gate transistors in a high volume manufacturing process. The transistors feature 1.0 nm EOT high-k gate dielectric, dual band edge workfunction metal gates and third generation strained silicon, resulting in the highest drive currents yet reported for NMOS and PMOS. The technology also features trench contact based local routing, 9 layers of copper interconnect with low-k ILD, low cost 193 nm dry patterning, and 100% Pb-free packaging. Process yield, performance and reliability are demonstrated on 153 Mb SRAM arrays with SRAM cell size of 0.346 mum2, and on multiple microprocessors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review on high-k dielectrics reliability issues
Ribes, G., Mitard, J., Denais, M., Bruyere, S., Monsieur, F., Parthasarathy, C., Vincent, E., & Ghibaudo, G. (2005) · IEEE Transactions on Device and Materials Reliability · doi:10.1109/tdmr.2005.845236 · Cited by 533 · cited 2×
“Many challenges with high-k integration have included VT pinning, mobility degradation due to soft optical phonons, and poor reliability [1-3].”
Background
Cited by
Radisavljevic, B., Radenovic, A., Brivio, J., Giacometti, V., & Kis, A. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2010.279 · Cited by 14,939
Electronics based on two-dimensional materials
Fiori, G., Bonaccorso, F., Iannaccone, G., Palacios, T., Neumaier, D., Seabaugh, A., Banerjee, S. K., & Colombo, L. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.207 · Cited by 3,176
Graphene and two-dimensional materials for silicon technology
Akinwande, D., Huyghebaert, C., Wang, C.-H., Serna, M. I., Goossens, S., Li, L.-J., Wong, H.-S. P., & Koppens, F. H. L. (2019) · Nature · doi:10.1038/s41586-019-1573-9 · Cited by 1,713
Two-dimensional semiconductors for transistors
Chhowalla, M., Jena, D., & Zhang, H. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.52 · Cited by 1,663
Integrated Circuits and Logic Operations Based on Single-Layer MoS2
Radisavljevic, B., Whitwick, M. B., & Kis, A. (2011) · ACS Nano · doi:10.1021/nn203715c · Cited by 1,338
Considerations for Ultimate CMOS Scaling
Kuhn, K. J. (2012) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2012.2193129 · Cited by 679
Self-citationCao, W., Bu, H., Vinet, M., Cao, M., Takagi, S., Hwang, S., Ghani, T., & Banerjee, K. (2023) · Nature · doi:10.1038/s41586-023-06145-x · Cited by 621
Self-citationA 48-Core IA-32 message-passing processor with DVFS in 45nm CMOS
Howard, J., Dighe, S., Hoskote, Y., Vangal, S., Finan, D., Ruhl, G., Jenkins, D., Wilson, H., Borkar, N., Schrom, G., et al. (2010) · 2010 IEEE International Solid-State Circuits Conference - (ISSCC) · doi:10.1109/isscc.2010.5434077 · Cited by 597
2D materials for future heterogeneous electronics
Lemme, M. C., Akinwande, D., Huyghebaert, C., & Stampfer, C. (2022) · Nature Communications · doi:10.1038/s41467-022-29001-4 · Cited by 572
Improved Contacts to MoS2 Transistors by Ultra-High Vacuum Metal Deposition
English, C. D., Shine, G., Dorgan, V. E., Saraswat, K. C., & Pop, E. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b01309 · Cited by 554
Engineering metallic nanostructures for plasmonics and nanophotonics
Lindquist, N. C., Nagpal, P., McPeak, K. M., Norris, D. J., & Oh, S.-H. (2012) · Reports on Progress in Physics · doi:10.1088/0034-4885/75/3/036501 · Cited by 497
Scaling equations for the accurate prediction of CMOS device performance from 180 nm to 7 nm
Stillmaker, A., & Baas, B. (2017) · Integration · doi:10.1016/j.vlsi.2017.02.002 · Cited by 457
Two-dimensional materials prospects for non-volatile spintronic memories
Yang, H., Valenzuela, S. O., Chshiev, M., Couet, S., Dieny, B., Dlubak, B., Fert, A., Garello, K., Jamet, M., Jeong, D.-E., et al. (2022) · Nature · doi:10.1038/s41586-022-04768-0 · Cited by 447
Self-citationQubits made by advanced semiconductor manufacturing
Zwerver, A. M. J., Krähenmann, T., Watson, T. F., Lampert, L., George, H. C., Pillarisetty, R., Bojarski, S. A., Amin, P., Amitonov, S. V., Boter, J. M., et al. (2022) · Nature Electronics · doi:10.1038/s41928-022-00727-9 · Cited by 364
CMOS Scaling Trends and Beyond
Bohr, M. T., & Young, I. A. (2017) · IEEE Micro · doi:10.1109/mm.2017.4241347 · Cited by 336
Ferroelectric field-effect transistors based on HfO 2 : a review
Mulaosmanovic, H., Breyer, E. T., Dünkel, S., Beyer, S., Mikolajick, T., & Slesazeck, S. (2021) · Nanotechnology · doi:10.1088/1361-6528/ac189f · Cited by 333
Physics of SrTiO3-based heterostructures and nanostructures: a review
Pai, Y.-Y., Tylan-Tyler, A., Irvin, P., & Levy, J. (2018) · Reports on Progress in Physics · doi:10.1088/1361-6633/aa892d · Cited by 309
Challenges and Limitations of CMOS Scaling for FinFET and Beyond Architectures
Razavieh, A., Zeitzoff, P., & Nowak, E. J. (2019) · IEEE Transactions on Nanotechnology · doi:10.1109/tnano.2019.2942456 · Cited by 291
A 45 nm Resilient Microprocessor Core for Dynamic Variation Tolerance
Bowman, K. A., Tschanz, J. W., Lu, S.-L. L., Aseron, P. A., Khellah, M. M., Raychowdhury, A., Geuskens, B. M., Tokunaga, C., Wilkerson, C. B., Karnik, T., et al. (2011) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2010.2089657 · Cited by 266
Kinetically stabilized ferroelectricity in bulk single-crystalline HfO2:Y
Xu, X., Huang, F.-T., Qi, Y., Singh, S., Rabe, K. M., Obeysekera, D., Yang, J., Chu, M.-W., & Cheong, S.-W. (2021) · Nature Materials · doi:10.1038/s41563-020-00897-x · Cited by 231
Ultrafast magnetization reversal by picosecond electrical pulses
Yang, Y., Wilson, R. B., Gorchon, J., Lambert, C.-H., Salahuddin, S., & Bokor, J. (2017) · Science Advances · doi:10.1126/sciadv.1603117 · Cited by 206
“For comparison, silicon field-effect transistors have switching delays less than 5 ps ( 13 ).”
Mathew, S. K., Srinivasan, S., Anders, M. A., Kaul, H., Hsu, S. K., Sheikh, F., Agarwal, A., Satpathy, S., & Krishnamurthy, R. K. (2012) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2012.2217631 · Cited by 195
“An all-digital TRNG is fabricated in 45 nm CMOS [23] with 2.”
MethodInfluentialProgress in Contact, Doping and Mobility Engineering of MoS2: An Atomically Thin 2D Semiconductor
Rai, A., Movva, H., Roy, A., Taneja, D., Chowdhury, S., & Banerjee, S. (2018) · Crystals · doi:10.3390/cryst8080316 · Cited by 178
Emerging Applications for High K Materials in VLSI Technology
Clark, R. (2014) · Materials · doi:10.3390/ma7042913 · Cited by 172
Metadata
- Authors
- Mistry, K., Chau, R., Choi, C.-H., Ding, G., Fischer, K., Ghani, T., Grover, R., Han, W., Hanken, D., Hattendorf, M., He, J., Allen, C., Hicks, J., Huessner, R., Ingerly, D., Jain, P., James, R., Jong, L., Joshi, S., Kenyon, C., Kuhn, K., Lee, K., Auth, C., Liu, H., Maiz, J., McIntyre, B., Moon, P., Neirynck, J., Pae, S., Parker, C., Parsons, D., Prasad, C., Pipes, L., Beattie, B., Prince, M., Ranade, P., Reynolds, T., Sandford, J., Shifren, L., Sebastian, J., Seiple, J., Simon, D., Sivakumar, S., Smith, P., Bergstrom, D., Thomas, C., Troeger, T., Vandervoorn, P., Williams, S., Zawadzki, K., Bost, M., Brazier, M., Buehler, M., & Cappellani, A.
- Venue
- 2007 IEEE International Electron Devices Meeting
- Publisher
- IEEE
- Published
- 2007-12
- Pages
- 247-250
- ISSN
- 0163-1918 (ISSN-L)
- OpenAlex
- W2001894083
- Cited by
- 854
- References
- 1
- FWCI
- 104.19
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.