Thermal characterization of GaN-on-diamond substrates for HEMT applications
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
High-power operation of AlGaN/GaN high-electron-mobility transistors (HEMTs) requires efficient heat removal through the substrate. GaN composite substrates including high-thermal-conductivity diamond are promising, but high thermal resistances at the interfaces between the GaN and diamond can offset the benefit of a diamond substrate. We report on measurements of the thermal resistances at the GaN-diamond interfaces for two generations (1stand 2nd) of GaN-on-diamond substrates using a combination of picosecond time-domain thermoreflectance (TDTR) and nanosecond transient thermoreflectance (TTR) techniques. Two flipped-epitaxial samples are presented to determine the thermal resistances of the AlGaN/AlN transition layer. For the 2ndgeneration samples, electrical heating and thermometry in nanopatterned metal bridges confirms the TDTR results. This paper demonstrates that the latter generation samples, which reduce the AlGaN thickness by 75%, result in a strongly-reduced thermal resistance between the GaN and diamond. Further optimization of the GaN-diamond interfaces should provide an opportunity for improved cooling of HEMT devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Analysis of heat flow in layered structures for time-domain thermoreflectance
Cahill, D. G. (2004) · Review of Scientific Instruments · doi:10.1063/1.1819431 · Cited by 1,543 · cited 1×
“resistances in multilayer thin film structures [11]-[14].”
Reliability of GaN High-Electron-Mobility Transistors: State of the Art and Perspectives
Meneghesso, G., Verzellesi, G., Danesin, F., Rampazzo, F., Zanon, F., Tazzoli, A., Meneghini, M., & Zanoni, E. (2008) · IEEE Transactions on Device and Materials Reliability · doi:10.1109/tdmr.2008.923743 · Cited by 675 · cited 1×
“But localized device-level self-heating limits the peak power density and degrades device reliability [3].”
BackgroundLow Thermal Resistances at GaN–SiC Interfaces for HEMT Technology
Cho, J., Bozorg-Grayeli, E., Altman, D. H., Asheghi, M., & Goodson, K. E. (2012) · IEEE Electron Device Letters · doi:10.1109/led.2011.2181481 · Cited by 109
Self-citation
Cited by
Nanoscale thermal transport. II. 2003–2012
Cahill, D. G., Braun, P. V., Chen, G., Clarke, D. R., Fan, S., Goodson, K. E., Keblinski, P., King, W. P., Mahan, G. D., Majumdar, A., et al. (2014) · Applied Physics Reviews · doi:10.1063/1.4832615 · Cited by 1,763
Self-citationA Numerical Study on Comparing the Active and Passive Cooling of AlGaN/GaN HEMTs
Chen, X., Donmezer, F. N., Kumar, S., & Graham, S. (2014) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2014.2360504 · Cited by 75
Thermal Conduction Inhomogeneity of Nanocrystalline Diamond Films by Dual-Side Thermoreflectance
Bozorg-Grayeli, E., Sood, A., Asheghi, M., Gambin, V., Sandhu, R., Feygelson, T. I., Pate, B. B., Hobart, K., & Goodson, K. E. (2013) · Applied Physics Letters · doi:10.1063/1.4796168 · Cited by 42
Self-citationWang, K., Hu, W., Wu, S., Wang, H., Padhiar, M. A., & Ji, Y. (2024) · Physica Scripta · doi:10.1088/1402-4896/ad4b69 · Cited by 5
Metadata
- Authors
- Cho, J., Li, Z., Bozorg-Grayeli, E., Kodama, T., Francis, D., Ejeckam, F., Faili, F., Asheghi, M., & Goodson, K. E.
- Venue
- 13th InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems
- Publisher
- IEEE
- Published
- 2012-05
- Pages
- 435-439
- ISSN
- 1087-9870 (ISSN-L)
- OpenAlex
- W2118897995
- Cited by
- 24
- References
- 3
- FWCI
- 8.31
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.