Reliability Improvement of Power Converters by Means of Condition Monitoring of IGBT Modules
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Power electronic systems have gradually gained an important status in a wide range of industrial applications such as renewable generation, motor drives, automotive, and railway transportation. Accordingly, recent research makes an effort to improve the reliability of power electronic systems to comply with more stringent constraints on safety, cost, and availability. The power devices are one of the most reliability-critical components in power electronic systems. Therefore, its condition monitoring plays an important role to improve the reliability of power electronic systems. This paper proposes a condition monitoring method of insulated-gate bipolar transistor (IGBT) modules. In the first section of this paper, a structure of a conventional IGBT module and a related parameter for the condition monitoring are explained. Then, a proposed real-time on-state collector-emitter voltage measurement circuit and condition monitoring strategies under different operating conditions are described. Finally, experimental results confirm the feasibility and effectiveness of the proposed method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Selected failure mechanisms of modern power modules
Ciappa, M. (2002) · Microelectronics Reliability · doi:10.1016/s0026-2714(02)00042-2 · Cited by 1,039
Transitioning to Physics-of-Failure as a Reliability Driver in Power Electronics
Wang, H., Liserre, M., Blaabjerg, F., de Place Rimmen, P., Jacobsen, J. B., Kvisgaard, T., & Landkildehus, J. (2014) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2290282 · Cited by 693 · cited 1×
“transportation, recent research makes an effort to improve the reliability of power electronic systems to comply with more stringent constraints on safety, cost, and availability [1], [2].”
BackgroundSelf-citationSmet, V., Forest, F., Huselstein, J.-J., Rashed, A., & Richardeau, F. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2196894 · Cited by 232 · cited 2×
“tion monitoring methods are dedicated to accelerated power cycling test [8]–[11].”
MethodAdvanced Accelerated Power Cycling Test for Reliability Investigation of Power Device Modules
Choi, U.-M., Joergensen, S., & Blaabjerg, F. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2521899 · Cited by 200
Self-citation
Cited by
A Practical On-Board SiC MOSFET Condition Monitoring Technique for Aging Detection
Pu, S., Yang, F., Vankayalapati, B. T., Ugur, E., Xu, C., & Akin, B. (2020) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2020.2980220 · Cited by 75
Thermal Digital Twin of Power Electronics Modules for Online Thermal Parameter Identification
Kuprat, J., Debbadi, K., Schaumburg, J., Liserre, M., & Langwasser, M. (2024) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2023.3328219 · Cited by 39
Metadata
- Authors
- Choi, U.-M., Blaabjerg, F., Jorgensen, S., Munk-Nielsen, S., & Rannestad, B.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2017-10
- Volume
- 32
- Issue
- 10
- Pages
- 7990-7997
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2559456120
- Cited by
- 211
- References
- 4
- FWCI
- 6.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Reliability Improvement of Power Converters by Means of Condition Monitoring of IGBT Modules. https://app.cochat.ai/papers/10.1109/tpel.2016.2633578
- The paper
- Choi, U.-M., Blaabjerg, F., Jorgensen, S., Munk-Nielsen, S., & Rannestad, B. (2017). Reliability Improvement of Power Converters by Means of Condition Monitoring of IGBT Modules. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2016.2633578
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.